Status network error no data


HTTP Error and Status Codes Explained

When visiting Web sites, the client application makes connections to Web servers via a network protocol called HTTP. These network connections support sending response data from servers back to clients including the content of Web pages and also some protocol control information.

Types of HTTP Error and Status Codes

Included in the HTTP server response data for each request is a code number indicating the result of the request. These result codes are three-digit numbers divided into categories as follows:

  • 100-199 : informational status
  • 200-299 : success status
  • 300-399 : redirection status
  • 400-499 : client errors
  • 500-599 : server errors
Only a few of the many possible error and status codes are commonly seen on the Internet or intranets. Codes related to errors are typically shown in the Web page displayed as output of a failed request, while other codes are not displayed to users. Wikimedia Commons The Web server processed the request successfully and transmitted content back to the browser. Most HTTP requests result in this status. Users rarely will see this code on the screen as Web browsers generally only show codes when there is some problem.

HTTP Error 404 "Not Found"

The Web server could not find the requested page, file, or other resource. HTTP 404 errors indicate the network connection between client and server was made successfully. This error most commonly occurs when users manually enter an incorrect URI into a browser or the Web server administrator removes a file without redirecting the address to a valid new location. Users must change their URL to fix this problem.

Wikimedia Commons The Web server received a valid request from a client but was unable to process it. HTTP 500 errors occur when the server encounters some general technical glitch such as being low on available memory or disk space. A server administrator must fix this problem. More »

HTTP Error 503 "Service Unavailable"

Public domain This code indicates a Web server cannot process the incoming client request. Some Web servers use HTTP 503 to indicate expected failures, due to administrative policies such as exceeding a limit on the number of concurrent users or CPU utilization, from unexpected failures that would normally be reported as HTTP 500 instead.

HTTP 301 "Moved Permanently"

Public Domain The URI specified by the client has been moved to a different location using a method called HTTP redirect, which allows the client to issue a new request and fetch the resource from the new location. Web browsers automatically follow HTTP 301 redirects without requiring user intervention.

HTTP 302 "Found" or "Moved Temporarily"

Public Domain This code indicates an HTTP redirect similar to code 301, but HTTP 302 was designed for cases where the resource is moved temporarily rather than permanently. A server administrator should use HTTP 302 only during brief content maintenance periods. Web browsers follow 302 redirects automatically like they do for code 301. HTTP version 1.1 added a new code 307 to indicate temporary redirects. Public Domain The Web server detected an error in the protocol data received from the client. Normally this indicates a technical glitch involving the client, but the error may also be caused by data corruption on the network itself. Public Domain This error occurs when Web clients request a protected resource on the server but have not been authenticated for access. Usually a client must log in to the server with a valid user name and password to fix the problem. Public Domain

Added in version 1.1 of the protocol, HTTP 100 was designed to utilize network bandwidth more efficiently by allowing servers an opportunity to confirm their readiness to accept large requests. The Continue protocol allows an HTTP 1.1 client to send a small, specially configured message asking the server to reply with a 100 code, then wait for the response before sending a (typically large) follow-up request. HTTP 1.0 clients and servers do not use this code.

Public Domain

The server sent a valid reply to a client request that contains header information only (i.e., does not contain any message body). Web clients can use HTTP 204 to process server responses more efficiently, avoiding refreshing pages unnecessarily, for example.

Public Domain

A network issue between the client and server causes this HTTP error. It can be triggered by configuration errors on a network firewall, router or other network gateway device.

www.lifewire.com

NT STATUS ERRORS

Error Code Error Code NT Status Description 0x00000000 0x00000000 NT_STATUS_OK “The operation completed successfully.” 0xC0000001 0x0000001f NT_STATUS_UNSUCCESSFUL “A device attached to the system is not functioning.” 0xC0000002 0x00000001 NT_STATUS_NOT_IMPLEMENTED “Incorrect function.” 0xC0000003 0x00000057 NT_STATUS_INVALID_INFO_CLASS “The parameter is incorrect.” 0xC0000004 0x00000018 NT_STATUS_INFO_LENGTH_MISMATCH “The program issued a command but the command length is incorrect.” 0xC0000005 0x000003e6 NT_STATUS_ACCESS_VIOLATION “Invalid access to memory location.” 0xC0000006 0x000003e7 NT_STATUS_IN_PAGE_ERROR “Error performing inpage operation.” 0xC0000007 0x000005ae NT_STATUS_PAGEFILE_QUOTA “Insufficient quota to complete the requested service.” 0xC0000008 0x00000006 NT_STATUS_INVALID_HANDLE “The handle is invalid.” 0xC0000009 0x000003e9 NT_STATUS_BAD_INITIAL_STACK “Recursion too deep, stack overflowed.” 0xC000000a 0x000000c1 NT_STATUS_BAD_INITIAL_PC “Not a valid Windows NT application.” 0xC000000b 0x00000057 NT_STATUS_INVALID_CID “The parameter is incorrect.” 0xC000000c 0x0000013d NT_STATUS_TIMER_NOT_CANCELED “NT_STATUS_TIMER_NOT_CANCELED” 0xC000000d 0x00000057 NT_STATUS_INVALID_PARAMETER “The parameter is incorrect.” 0xC000000e 0x00000002 NT_STATUS_NO_SUCH_DEVICE “The system cannot find the file specified.” 0xC000000f 0x00000002 NT_STATUS_NO_SUCH_FILE “The system cannot find the file specified.” 0xC0000010 0x00000001 NT_STATUS_INVALID_DEVICE_REQUEST “Incorrect function.” 0xC0000011 0x00000026 NT_STATUS_END_OF_FILE “Reached end of file.” 0xC0000012 0x00000022 NT_STATUS_WRONG_VOLUME “The wrong diskette is in the drive. Insert %2 (Volume Serial Number: %3) into drive %1.” 0xC0000013 0x00000015 NT_STATUS_NO_MEDIA_IN_DEVICE “The device is not ready.” 0xC0000014 0x000006f9 NT_STATUS_UNRECOGNIZED_MEDIA “The disk media is not recognized. It may not be formatted.” 0xC0000015 0x0000001b NT_STATUS_NONEXISTENT_SECTOR “The drive cannot find the sector requested.” 0xC0000016 0x000000ea NT_STATUS_MORE_PROCESSING_REQUIRED “More data is available.” 0xC0000017 0x00000008 NT_STATUS_NO_MEMORY “Not enough storage is available to process this command.” 0xC0000018 0x000001e7 NT_STATUS_CONFLICTING_ADDRESSES “Attempt to access invalid address.” 0xC0000019 0x000001e7 NT_STATUS_NOT_MAPPED_VIEW “Attempt to access invalid address.” 0xC000001a 0x00000057 NT_STATUS_UNABLE_TO_FREE_VM “The parameter is incorrect.” 0xC000001b 0x00000057 NT_STATUS_UNABLE_TO_DELETE_SECTION “The parameter is incorrect.” 0xC000001c 0x00000001 NT_STATUS_INVALID_SYSTEM_SERVICE “Incorrect function.” 0xC000001d 0xc000001d NT_STATUS_ILLEGAL_INSTRUCTION “NT_STATUS_ILLEGAL_INSTRUCTION” 0xC000001e 0x00000005 NT_STATUS_INVALID_LOCK_SEQUENCE “Access is denied.” 0xC000001f 0x00000005 NT_STATUS_INVALID_VIEW_SIZE “Access is denied.” 0xC0000020 0x000000c1 NT_STATUS_INVALID_FILE_FOR_SECTION “Not a valid Windows NT application.” 0xC0000021 0x00000005 NT_STATUS_ALREADY_COMMITTED “Access is denied.” 0xC0000022 0x00000005 NT_STATUS_ACCESS_DENIED “Access is denied.” 0xC0000023 0x0000007a NT_STATUS_BUFFER_TOO_SMALL “The data area passed to a system call is too small.” 0xC0000024 0x00000006 NT_STATUS_OBJECT_TYPE_MISMATCH “The handle is invalid.” 0xC0000025 0xc0000025 NT_STATUS_NONCONTINUABLE_EXCEPTION “NT_STATUS_NONCONTINUABLE_EXCEPTION” 0xC0000026 0xc0000026 NT_STATUS_INVALID_DISPOSITION “NT_STATUS_INVALID_DISPOSITION” 0xC0000027 0x0000013d NT_STATUS_UNWIND “NT_STATUS_UNWIND” 0xC0000028 0x0000013d NT_STATUS_BAD_STACK “NT_STATUS_BAD_STACK” 0xC0000029 0x0000013d NT_STATUS_INVALID_UNWIND_TARGET “NT_STATUS_INVALID_UNWIND_TARGET” 0xC000002a 0x0000009e NT_STATUS_NOT_LOCKED “The segment is already unlocked.” 0xC000002b 0xc000002b NT_STATUS_PARITY_ERROR “NT_STATUS_PARITY_ERROR” 0xC000002c 0x000001e7 NT_STATUS_UNABLE_TO_DECOMMIT_VM “Attempt to access invalid address.” 0xC000002d 0x000001e7 NT_STATUS_NOT_COMMITTED “Attempt to access invalid address.” 0xC000002e 0x0000013d NT_STATUS_INVALID_PORT_ATTRIBUTES “NT_STATUS_INVALID_PORT_ATTRIBUTES” 0xC000002f 0x0000013d NT_STATUS_PORT_MESSAGE_TOO_LONG “NT_STATUS_PORT_MESSAGE_TOO_LONG” 0xC0000030 0x00000057 NT_STATUS_INVALID_PARAMETER_MIX “The parameter is incorrect.” 0xC0000031 0x0000013d NT_STATUS_INVALID_QUOTA_LOWER “NT_STATUS_INVALID_QUOTA_LOWER” 0xC0000032 0x00000571 NT_STATUS_DISK_CORRUPT_ERROR “The disk structure is corrupt and non-readable.” 0xC0000033 0x0000007b NT_STATUS_OBJECT_NAME_INVALID “The filename, directory name, or volume label syntax is incorrect.” 0xC0000034 0x00000002 NT_STATUS_OBJECT_NAME_NOT_FOUND “The system cannot find the file specified.” 0xC0000035 0x000000b7 NT_STATUS_OBJECT_NAME_COLLISION “Cannot create a file when that file already exists.” 0xC0000036 0x0000013d NT_STATUS_HANDLE_NOT_WAITABLE “NT_STATUS_HANDLE_NOT_WAITABLE” 0xC0000037 0x00000006 NT_STATUS_PORT_DISCONNECTED “The handle is invalid.” 0xC0000038 0x0000013d NT_STATUS_DEVICE_ALREADY_ATTACHED “NT_STATUS_DEVICE_ALREADY_ATTACHED” 0xC0000039 0x000000a1 NT_STATUS_OBJECT_PATH_INVALID “The specified path is invalid.” 0xC000003a 0x00000003 NT_STATUS_OBJECT_PATH_NOT_FOUND “The system cannot find the path specified.” 0xC000003b 0x000000a1 NT_STATUS_OBJECT_PATH_SYNTAX_BAD “The specified path is invalid.” 0xC000003c 0x0000045d NT_STATUS_DATA_OVERRUN “The request could not be performed because of an I/O device error.” 0xC000003d 0x0000045d NT_STATUS_DATA_LATE_ERROR “The request could not be performed because of an I/O device error.” 0xC000003e 0x00000017 NT_STATUS_DATA_ERROR “Data error (cyclic redundancy check)” 0xC000003f 0x00000017 NT_STATUS_CRC_ERROR “Data error (cyclic redundancy check)” 0xC0000040 0x00000008 NT_STATUS_SECTION_TOO_BIG “Not enough storage is available to process this command.” 0xC0000041 0x00000005 NT_STATUS_PORT_CONNECTION_REFUSED “Access is denied.” 0xC0000042 0x00000006 NT_STATUS_INVALID_PORT_HANDLE “The handle is invalid.” 0xC0000043 0x00000020 NT_STATUS_SHARING_VIOLATION “The process cannot access the file because it is being used by another process.” 0xC0000044 0x00000718 NT_STATUS_QUOTA_EXCEEDED “Not enough quota is available to process this command.” 0xC0000045 0x00000057 NT_STATUS_INVALID_PAGE_PROTECTION “The parameter is incorrect.” 0xC0000046 0x00000120 NT_STATUS_MUTANT_NOT_OWNED “Attempt to release mutex not owned by caller.” 0xC0000047 0x0000012a NT_STATUS_SEMAPHORE_LIMIT_EXCEEDED “Too many posts were made to a semaphore.” 0xC0000048 0x00000057 NT_STATUS_PORT_ALREADY_SET “The parameter is incorrect.” 0xC0000049 0x00000057 NT_STATUS_SECTION_NOT_IMAGE “The parameter is incorrect.” 0xC000004a 0x0000009c NT_STATUS_SUSPEND_COUNT_EXCEEDED “The recipient process has refused the signal.” 0xC000004b 0x00000005 NT_STATUS_THREAD_IS_TERMINATING “Access is denied.” 0xC000004c 0x00000057 NT_STATUS_BAD_WORKING_SET_LIMIT “The parameter is incorrect.” 0xC000004d 0x00000057 NT_STATUS_INCOMPATIBLE_FILE_MAP “The parameter is incorrect.” 0xC000004e 0x00000057 NT_STATUS_SECTION_PROTECTION “The parameter is incorrect.” 0xC000004f 0x0000013d NT_STATUS_EAS_NOT_SUPPORTED “NT_STATUS_EAS_NOT_SUPPORTED” 0xC0000050 0x000000ff NT_STATUS_EA_TOO_LARGE “The extended attributes are inconsistent.” 0xC0000051 0x00000570 NT_STATUS_NONEXISTENT_EA_ENTRY “The file or directory is corrupt and non-readable.” 0xC0000052 0x00000570 NT_STATUS_NO_EAS_ON_FILE “The file or directory is corrupt and non-readable.” 0xC0000053 0x00000570 NT_STATUS_EA_CORRUPT_ERROR “The file or directory is corrupt and non-readable.” 0xC0000054 0x00000021 NT_STATUS_FILE_LOCK_CONFLICT “The process cannot access the file because another process has locked a portion of the file.” 0xC0000055 0x00000021 NT_STATUS_LOCK_NOT_GRANTED “The process cannot access the file because another process has locked a portion of the file.” 0xC0000056 0x00000005 NT_STATUS_DELETE_PENDING “Access is denied.” 0xC0000057 0x00000032 NT_STATUS_CTL_FILE_NOT_SUPPORTED “The network request is not supported.” 0xC0000058 0x00000519 NT_STATUS_UNKNOWN_REVISION “The revision level is unknown.” 0xC0000059 0x0000051a NT_STATUS_REVISION_MISMATCH “Indicates two revision levels are incompatible.” 0xC000005a 0x0000051b NT_STATUS_INVALID_OWNER “This security ID may not be assigned as the owner of this object.” 0xC000005b 0x0000051c NT_STATUS_INVALID_PRIMARY_GROUP “This security ID may not be assigned as the primary group of an object.” 0xC000005c 0x0000051d NT_STATUS_NO_IMPERSONATION_TOKEN “An attempt has been made to operate on an impersonation token by a thread that is not currently impersonating a client.” 0xC000005d 0x0000051e NT_STATUS_CANT_DISABLE_MANDATORY “The group may not be disabled.” 0xC000005e 0x0000051f NT_STATUS_NO_LOGON_SERVERS “There are currently no logon servers available to service the logon request.” 0xC000005f 0x00000520 NT_STATUS_NO_SUCH_LOGON_SESSION “A specified logon session does not exist. It may already have been terminated.” 0xC0000060 0x00000521 NT_STATUS_NO_SUCH_PRIVILEGE “A specified privilege does not exist.” 0xC0000061 0x00000522 NT_STATUS_PRIVILEGE_NOT_HELD “A required privilege is not held by the client.” 0xC0000062 0x00000523 NT_STATUS_INVALID_ACCOUNT_NAME “The name provided is not a properly formed account name.” 0xC0000063 0x00000524 NT_STATUS_USER_EXISTS “The specified user already exists.” 0xC0000064 0x00000525 NT_STATUS_NO_SUCH_USER “The specified user does not exist.” 0xC0000065 0x00000526 NT_STATUS_GROUP_EXISTS “The specified group already exists.” 0xC0000066 0x00000527 NT_STATUS_NO_SUCH_GROUP “The specified group does not exist.” 0xC0000067 0x00000528 NT_STATUS_MEMBER_IN_GROUP “Either the specified user account is already a member of the specified group, or the specified group cannot be deleted because it contains a member.” 0xC0000068 0x00000529 NT_STATUS_MEMBER_NOT_IN_GROUP “The specified user account is not a member of the specified group account.” 0xC0000069 0x0000052a NT_STATUS_LAST_ADMIN “The last remaining administration account cannot be disabled or deleted.” 0xC000006a 0x00000056 NT_STATUS_WRONG_PASSWORD “The specified network password is not correct.” 0xC000006b 0x0000052c NT_STATUS_ILL_FORMED_PASSWORD “Unable to update the password. The value provided for the new password contains values that are not allowed in passwords.” 0xC000006c 0x0000052d NT_STATUS_PASSWORD_RESTRICTION “Unable to update the password because a password update rule has been violated.” 0xC000006d 0x0000052e NT_STATUS_LOGON_FAILURE “Logon failure: unknown user name or bad password.” 0xC000006e 0x0000052f NT_STATUS_ACCOUNT_RESTRICTION “Logon failure: user account restriction.” 0xC000006f 0x00000530 NT_STATUS_INVALID_LOGON_HOURS “Logon failure: account logon time restriction violation.” 0xC0000070 0x00000531 NT_STATUS_INVALID_WORKSTATION “Logon failure: user not allowed to log on to this computer.” 0xC0000071 0x00000532 NT_STATUS_PASSWORD_EXPIRED “Logon failure: the specified account password has expired.” 0xC0000072 0x00000533 NT_STATUS_ACCOUNT_DISABLED “Logon failure: account currently disabled.” 0xC0000073 0x00000534 NT_STATUS_NONE_MAPPED “No mapping between account names and security IDs was done.” 0xC0000074 0x00000535 NT_STATUS_TOO_MANY_LUIDS_REQUESTED “Too many local user identifiers (LUIDs) were requested at one time.” 0xC0000075 0x00000536 NT_STATUS_LUIDS_EXHAUSTED “No more local user identifiers (LUIDs) are available.” 0xC0000076 0x00000537 NT_STATUS_INVALID_SUB_AUTHORITY “The subauthority part of a security ID is invalid for this particular use.” 0xC0000077 0x00000538 NT_STATUS_INVALID_ACL “The access control list (ACL) structure is invalid.” 0xC0000078 0x00000539 NT_STATUS_INVALID_SID “The security ID structure is invalid.” 0xC0000079 0x0000053a NT_STATUS_INVALID_SECURITY_DESCR “The security descriptor structure is invalid.” 0xC000007a 0x0000007f NT_STATUS_PROCEDURE_NOT_FOUND “The specified procedure could not be found.” 0xC000007b 0x000000c1 NT_STATUS_INVALID_IMAGE_FORMAT “%1 is not a valid Windows NT application.” 0xC000007c 0x000003f0 NT_STATUS_NO_TOKEN “An attempt was made to reference a token that does not exist.” 0xC000007d 0x0000053c NT_STATUS_BAD_INHERITANCE_ACL “The inherited access control list (ACL) or access control entry (ACE) could not be built.” 0xC000007e 0x0000009e NT_STATUS_RANGE_NOT_LOCKED “The segment is already unlocked.” 0xC000007f 0x00000070 NT_STATUS_DISK_FULL “There is not enough space on the disk.” 0xC0000080 0x0000053d NT_STATUS_SERVER_DISABLED “The server is currently disabled.” 0xC0000081 0x0000053e NT_STATUS_SERVER_NOT_DISABLED “The server is currently enabled.” 0xC0000082 0x00000044 NT_STATUS_TOO_MANY_GUIDS_REQUESTED “The name limit for the local computer network adapter card was exceeded.” 0xC0000083 0x00000103 NT_STATUS_GUIDS_EXHAUSTED “No more data is available.” 0xC0000084 0x0000053f NT_STATUS_INVALID_ID_AUTHORITY “The value provided was an invalid value for an identifier authority.” 0xC0000085 0x00000103 NT_STATUS_AGENTS_EXHAUSTED “No more data is available.” 0xC0000086 0x0000009a NT_STATUS_INVALID_VOLUME_LABEL “The volume label you entered exceeds the label character limit of the target file system.” 0xC0000087 0x0000000e NT_STATUS_SECTION_NOT_EXTENDED “Not enough storage is available to complete this operation.” 0xC0000088 0x000001e7 NT_STATUS_NOT_MAPPED_DATA “Attempt to access invalid address.” 0xC0000089 0x00000714 NT_STATUS_RESOURCE_DATA_NOT_FOUND “The specified image file did not contain a resource section.” 0xC000008a 0x00000715 NT_STATUS_RESOURCE_TYPE_NOT_FOUND “The specified resource type can not be found in the image file.” 0xC000008b 0x00000716 NT_STATUS_RESOURCE_NAME_NOT_FOUND “The specified resource name can not be found in the image file.” 0xC000008c 0xc000008c NT_STATUS_ARRAY_BOUNDS_EXCEEDED “NT_STATUS_ARRAY_BOUNDS_EXCEEDED” 0xC000008d 0xc000008d NT_STATUS_FLOAT_DENORMAL_OPERAND “NT_STATUS_FLOAT_DENORMAL_OPERAND” 0xC000008e 0xc000008e NT_STATUS_FLOAT_DIVIDE_BY_ZERO “NT_STATUS_FLOAT_DIVIDE_BY_ZERO” 0xC000008f 0xc000008f NT_STATUS_FLOAT_INEXACT_RESULT “NT_STATUS_FLOAT_INEXACT_RESULT” 0xC0000090 0xc0000090 NT_STATUS_FLOAT_INVALID_OPERATION “NT_STATUS_FLOAT_INVALID_OPERATION” 0xC0000091 0xc0000091 NT_STATUS_FLOAT_OVERFLOW “NT_STATUS_FLOAT_OVERFLOW” 0xC0000092 0xc0000092 NT_STATUS_FLOAT_STACK_CHECK “NT_STATUS_FLOAT_STACK_CHECK” 0xC0000093 0xc0000093 NT_STATUS_FLOAT_UNDERFLOW “NT_STATUS_FLOAT_UNDERFLOW” 0xC0000094 0xc0000094 NT_STATUS_INTEGER_DIVIDE_BY_ZERO “NT_STATUS_INTEGER_DIVIDE_BY_ZERO” 0xC0000095 0x00000216 NT_STATUS_INTEGER_OVERFLOW “Arithmetic result exceeded 32 bits.” 0xC0000096 0xc0000096 NT_STATUS_PRIVILEGED_INSTRUCTION “NT_STATUS_PRIVILEGED_INSTRUCTION” 0xC0000097 0x00000008 NT_STATUS_TOO_MANY_PAGING_FILES “Not enough storage is available to process this command.” 0xC0000098 0x000003ee NT_STATUS_FILE_INVALID “The volume for a file has been externally altered such that the opened file is no longer valid.” 0xC0000099 0x00000540 NT_STATUS_ALLOTTED_SPACE_EXCEEDED “No more memory is available for security information updates.” 0xC000009a 0x000005aa NT_STATUS_INSUFFICIENT_RESOURCES “Insufficient system resources exist to complete the requested service.” 0xC000009b 0x00000003 NT_STATUS_DFS_EXIT_PATH_FOUND “The system cannot find the path specified.” 0xC000009c 0x00000017 NT_STATUS_DEVICE_DATA_ERROR “Data error (cyclic redundancy check)” 0xC000009d 0x00000015 NT_STATUS_DEVICE_NOT_CONNECTED “The device is not ready.” 0xC000009e 0x00000015 NT_STATUS_DEVICE_POWER_FAILURE “The device is not ready.” 0xC000009f 0x000001e7 NT_STATUS_FREE_VM_NOT_AT_BASE “Attempt to access invalid address.” 0xC00000a0 0x000001e7 NT_STATUS_MEMORY_NOT_ALLOCATED “Attempt to access invalid address.” 0xC00000a1 0x000005ad NT_STATUS_WORKING_SET_QUOTA “Insufficient quota to complete the requested service.” 0xC00000a2 0x00000013 NT_STATUS_MEDIA_WRITE_PROTECTED “The media is write protected.” 0xC00000a3 0x00000015 NT_STATUS_DEVICE_NOT_READY “The device is not ready.” 0xC00000a4 0x00000541 NT_STATUS_INVALID_GROUP_ATTRIBUTES “The specified attributes are invalid, or incompatible with the attributes for the group as a whole.” 0xC00000a5 0x00000542 NT_STATUS_BAD_IMPERSONATION_LEVEL “Either a required impersonation level was not provided, or the provided impersonation level is invalid.” 0xC00000a6 0x00000543 NT_STATUS_CANT_OPEN_ANONYMOUS “Cannot open an anonymous level security token.” 0xC00000a7 0x00000544 NT_STATUS_BAD_VALIDATION_CLASS “The validation information class requested was invalid.” 0xC00000a8 0x00000545 NT_STATUS_BAD_TOKEN_TYPE “The type of the token is inappropriate for its attempted use.” 0xC00000a9 0x0000013d NT_STATUS_BAD_MASTER_BOOT_RECORD “NT_STATUS_BAD_MASTER_BOOT_RECORD” 0xC00000aa 0x0000013d NT_STATUS_INSTRUCTION_MISALIGNMENT “NT_STATUS_INSTRUCTION_MISALIGNMENT” 0xC00000ab 0x000000e7 NT_STATUS_INSTANCE_NOT_AVAILABLE “All pipe instances are busy.” 0xC00000ac 0x000000e7 NT_STATUS_PIPE_NOT_AVAILABLE “All pipe instances are busy.” 0xC00000ad 0x000000e6 NT_STATUS_INVALID_PIPE_STATE “The pipe state is invalid.” 0xC00000ae 0x000000e7 NT_STATUS_PIPE_BUSY “All pipe instances are busy.” 0xC00000af 0x00000001 NT_STATUS_ILLEGAL_FUNCTION “Incorrect function.” 0xC00000b0 0x000000e9 NT_STATUS_PIPE_DISCONNECTED “No process is on the other end of the pipe.” 0xC00000b1 0x000000e8 NT_STATUS_PIPE_CLOSING “The pipe is being closed.” 0xC00000b2 0x00000217 NT_STATUS_PIPE_CONNECTED “There is a process on other end of the pipe.” 0xC00000b3 0x00000218 NT_STATUS_PIPE_LISTENING “Waiting for a process to open the other end of the pipe.” 0xC00000b4 0x000000e6 NT_STATUS_INVALID_READ_MODE “The pipe state is invalid.” 0xC00000b5 0x00000079 NT_STATUS_IO_TIMEOUT “The semaphore timeout period has expired.” 0xC00000b6 0x00000026 NT_STATUS_FILE_FORCED_CLOSED “Reached end of file.” 0xC00000b7 0x0000013d NT_STATUS_PROFILING_NOT_STARTED “NT_STATUS_PROFILING_NOT_STARTED” 0xC00000b8 0x0000013d NT_STATUS_PROFILING_NOT_STOPPED “NT_STATUS_PROFILING_NOT_STOPPED” 0xC00000b9 0x0000013d NT_STATUS_COULD_NOT_INTERPRET “NT_STATUS_COULD_NOT_INTERPRET” 0xC00000ba 0x00000005 NT_STATUS_FILE_IS_A_DIRECTORY “Access is denied.” 0xC00000bb 0x00000032 NT_STATUS_NOT_SUPPORTED “The network request is not supported.” 0xC00000bc 0x00000033 NT_STATUS_REMOTE_NOT_LISTENING “The remote computer is not available.” 0xC00000bd 0x00000034 NT_STATUS_DUPLICATE_NAME “A duplicate name exists on the network.” 0xC00000be 0x00000035 NT_STATUS_BAD_NETWORK_PATH “The network path was not found.” 0xC00000bf 0x00000036 NT_STATUS_NETWORK_BUSY “The network is busy.” 0xC00000c0 0x00000037 NT_STATUS_DEVICE_DOES_NOT_EXIST “The specified network resource or device is no longer available.” 0xC00000c1 0x00000038 NT_STATUS_TOO_MANY_COMMANDS “The network BIOS command limit has been reached.” 0xC00000c2 0x00000039 NT_STATUS_ADAPTER_HARDWARE_ERROR “A network adapter hardware error occurred.” 0xC00000c3 0x0000003a NT_STATUS_INVALID_NETWORK_RESPONSE “The specified server cannot perform the requested operation.” 0xC00000c4 0x0000003b NT_STATUS_UNEXPECTED_NETWORK_ERROR “An unexpected network error occurred.” 0xC00000c5 0x0000003c NT_STATUS_BAD_REMOTE_ADAPTER “The remote adapter is not compatible.” 0xC00000c6 0x0000003d NT_STATUS_PRINT_QUEUE_FULL “The printer queue is full.” 0xC00000c7 0x0000003e NT_STATUS_NO_SPOOL_SPACE “Space to store the file waiting to be printed is not available on the server.” 0xC00000c8 0x0000003f NT_STATUS_PRINT_CANCELLED “Your file waiting to be printed was deleted.” 0xC00000c9 0x00000040 NT_STATUS_NETWORK_NAME_DELETED “The specified network name is no longer available.” 0xC00000ca 0x00000041 NT_STATUS_NETWORK_ACCESS_DENIED “Network access is denied.” 0xC00000cb 0x00000042 NT_STATUS_BAD_DEVICE_TYPE “The network resource type is not correct.” 0xC00000cc 0x00000043 NT_STATUS_BAD_NETWORK_NAME “The network name cannot be found.” 0xC00000cd 0x00000044 NT_STATUS_TOO_MANY_NAMES “The name limit for the local computer network adapter card was exceeded.” 0xC00000ce 0x00000045 NT_STATUS_TOO_MANY_SESSIONS “The network BIOS session limit was exceeded.” 0xC00000cf 0x00000046 NT_STATUS_SHARING_PAUSED “The remote server has been paused or is in the process of being started.” 0xC00000d0 0x00000047 NT_STATUS_REQUEST_NOT_ACCEPTED “No more connections can be made to this remote computer at this time because there are already as many connections as the computer can accept.” 0xC00000d1 0x00000048 NT_STATUS_REDIRECTOR_PAUSED “The specified printer or disk device has been paused.” 0xC00000d2 0x00000058 NT_STATUS_NET_WRITE_FAULT “A write fault occurred on the network.” 0xC00000d3 0x0000013d NT_STATUS_PROFILING_AT_LIMIT “NT_STATUS_PROFILING_AT_LIMIT” 0xC00000d4 0x00000011 NT_STATUS_NOT_SAME_DEVICE “The system cannot move the file to a different disk drive.” 0xC00000d5 0x0000013d NT_STATUS_FILE_RENAMED “NT_STATUS_FILE_RENAMED” 0xC00000d6 0x000000f0 NT_STATUS_VIRTUAL_CIRCUIT_CLOSED “The session was cancelled.” 0xC00000d7 0x00000546 NT_STATUS_NO_SECURITY_ON_OBJECT “Unable to perform a security operation on an object which has no associated security.” 0xC00000d8 0x0000013d NT_STATUS_CANT_WAIT “NT_STATUS_CANT_WAIT” 0xC00000d9 0x000000e8 NT_STATUS_PIPE_EMPTY “The pipe is being closed.” 0xC00000da 0x00000547 NT_STATUS_CANT_ACCESS_DOMAIN_INFO “Indicates a Windows NT Server could not be contacted or that objects within the domain are protected such that necessary information could not be retrieved.” 0xC00000db 0x0000013d NT_STATUS_CANT_TERMINATE_SELF “NT_STATUS_CANT_TERMINATE_SELF” 0xC00000dc 0x00000548 NT_STATUS_INVALID_SERVER_STATE “The security account manager (SAM) or local security authority (LSA) server was in the wrong state to perform the security operation.” 0xC00000dd 0x00000549 NT_STATUS_INVALID_DOMAIN_STATE “The domain was in the wrong state to perform the security operation.” 0xC00000de 0x0000054a NT_STATUS_INVALID_DOMAIN_ROLE “This operation is only allowed for the Primary Domain Controller of the domain.” 0xC00000df 0x0000054b NT_STATUS_NO_SUCH_DOMAIN “The specified domain did not exist.” 0xC00000e0 0x0000054c NT_STATUS_DOMAIN_EXISTS “The specified domain already exists.” 0xC00000e1 0x0000054d NT_STATUS_DOMAIN_LIMIT_EXCEEDED “An attempt was made to exceed the limit on the number of domains per server.” 0xC00000e2 0x0000013d NT_STATUS_OPLOCK_NOT_GRANTED “NT_STATUS_OPLOCK_NOT_GRANTED” 0xC00000e3 0x0000013d NT_STATUS_INVALID_OPLOCK_PROTOCOL “NT_STATUS_INVALID_OPLOCK_PROTOCOL” 0xC00000e4 0x0000054e NT_STATUS_INTERNAL_DB_CORRUPTION “Unable to complete the requested operation because of either a catastrophic media failure or a data structure corruption on the disk.” 0xC00000e5 0x0000054f NT_STATUS_INTERNAL_ERROR “The security account database contains an internal inconsistency.” 0xC00000e6 0x00000550 NT_STATUS_GENERIC_NOT_MAPPED “Generic access types were contained in an access mask which should already be mapped to non-generic types.” 0xC00000e7 0x00000551 NT_STATUS_BAD_DESCRIPTOR_FORMAT “A security descriptor is not in the right format (absolute or self-relative).” 0xC00000e8 0x000006f8 NT_STATUS_INVALID_USER_BUFFER “The supplied user buffer is not valid for the requested operation.” 0xC00000e9 0x0000013d NT_STATUS_UNEXPECTED_IO_ERROR “NT_STATUS_UNEXPECTED_IO_ERROR” 0xC00000ea 0x0000013d NT_STATUS_UNEXPECTED_MM_CREATE_ERR “NT_STATUS_UNEXPECTED_MM_CREATE_ERR” 0xC00000eb 0x0000013d NT_STATUS_UNEXPECTED_MM_MAP_ERROR “NT_STATUS_UNEXPECTED_MM_MAP_ERROR” 0xC00000ec 0x0000013d NT_STATUS_UNEXPECTED_MM_EXTEND_ERR “NT_STATUS_UNEXPECTED_MM_EXTEND_ERR” 0xC00000ed 0x00000552 NT_STATUS_NOT_LOGON_PROCESS “The requested action is restricted for use by logon processes only. The calling process has not registered as a logon process.” 0xC00000ee 0x00000553 NT_STATUS_LOGON_SESSION_EXISTS “Cannot start a new logon session with an ID that is already in use.” 0xC00000ef 0x00000057 NT_STATUS_INVALID_PARAMETER_1 “The parameter is incorrect.” 0xC00000f0 0x00000057 NT_STATUS_INVALID_PARAMETER_2 “The parameter is incorrect.” 0xC00000f1 0x00000057 NT_STATUS_INVALID_PARAMETER_3 “The parameter is incorrect.” 0xC00000f2 0x00000057 NT_STATUS_INVALID_PARAMETER_4 “The parameter is incorrect.” 0xC00000f3 0x00000057 NT_STATUS_INVALID_PARAMETER_5 “The parameter is incorrect.” 0xC00000f4 0x00000057 NT_STATUS_INVALID_PARAMETER_6 “The parameter is incorrect.” 0xC00000f5 0x00000057 NT_STATUS_INVALID_PARAMETER_7 “The parameter is incorrect.” 0xC00000f6 0x00000057 NT_STATUS_INVALID_PARAMETER_8 “The parameter is incorrect.” 0xC00000f7 0x00000057 NT_STATUS_INVALID_PARAMETER_9 “The parameter is incorrect.” 0xC00000f8 0x00000057 NT_STATUS_INVALID_PARAMETER_10 “The parameter is incorrect.” 0xC00000f9 0x00000057 NT_STATUS_INVALID_PARAMETER_11 “The parameter is incorrect.” 0xC00000fa 0x00000057 NT_STATUS_INVALID_PARAMETER_12 “The parameter is incorrect.” 0xC00000fb 0x00000003 NT_STATUS_REDIRECTOR_NOT_STARTED “The system cannot find the path specified.” 0xC00000fc 0x0000013d NT_STATUS_REDIRECTOR_STARTED “NT_STATUS_REDIRECTOR_STARTED” 0xC00000fd 0x000003e9 NT_STATUS_STACK_OVERFLOW “Recursion too deep, stack overflowed.” 0xC00000fe 0x00000554 NT_STATUS_NO_SUCH_PACKAGE “A specified authentication package is unknown.” 0xC00000ff 0x0000013d NT_STATUS_BAD_FUNCTION_TABLE “NT_STATUS_BAD_FUNCTION_TABLE” 0xC0000101 0x00000091 NT_STATUS_DIRECTORY_NOT_EMPTY “The directory is not empty.” 0xC0000102 0x00000570 NT_STATUS_FILE_CORRUPT_ERROR “The file or directory is corrupt and non-readable.” 0xC0000103 0x0000010b NT_STATUS_NOT_A_DIRECTORY “The directory name is invalid.” 0xC0000104 0x00000555 NT_STATUS_BAD_LOGON_SESSION_STATE “The logon session is not in a state that is consistent with the requested operation.” 0xC0000105 0x00000556 NT_STATUS_LOGON_SESSION_COLLISION “The logon session ID is already in use.” 0xC0000106 0x000000ce NT_STATUS_NAME_TOO_LONG “The filename or extension is too long.” 0xC0000107 0x0000013d NT_STATUS_FILES_OPEN “NT_STATUS_FILES_OPEN” 0xC0000108 0x00000964 NT_STATUS_CONNECTION_IN_USE “The device is being accessed by an active process.” 0xC0000109 0x0000013d NT_STATUS_MESSAGE_NOT_FOUND “NT_STATUS_MESSAGE_NOT_FOUND” 0xC000010a 0x00000005 NT_STATUS_PROCESS_IS_TERMINATING “Access is denied.” 0xC000010b 0x00000557 NT_STATUS_INVALID_LOGON_TYPE “A logon request contained an invalid logon type value.” 0xC000010c 0x0000013d NT_STATUS_NO_GUID_TRANSLATION “NT_STATUS_NO_GUID_TRANSLATION” 0xC000010d 0x00000558 NT_STATUS_CANNOT_IMPERSONATE “Unable to impersonate via a named pipe until data has been read from that pipe.” 0xC000010e 0x00000420 NT_STATUS_IMAGE_ALREADY_LOADED “An instance of the service is already running.” 0xC000010f 0x0000013d NT_STATUS_ABIOS_NOT_PRESENT “NT_STATUS_ABIOS_NOT_PRESENT” 0xC0000110 0x0000013d NT_STATUS_ABIOS_LID_NOT_EXIST “NT_STATUS_ABIOS_LID_NOT_EXIST” 0xC0000111 0x0000013d NT_STATUS_ABIOS_LID_ALREADY_OWNED “NT_STATUS_ABIOS_LID_ALREADY_OWNED” 0xC0000112 0x0000013d NT_STATUS_ABIOS_NOT_LID_OWNER “NT_STATUS_ABIOS_NOT_LID_OWNER” 0xC0000113 0x0000013d NT_STATUS_ABIOS_INVALID_COMMAND “NT_STATUS_ABIOS_INVALID_COMMAND” 0xC0000114 0x0000013d NT_STATUS_ABIOS_INVALID_LID “NT_STATUS_ABIOS_INVALID_LID” 0xC0000115 0x0000013d NT_STATUS_ABIOS_SELECTOR_NOT_AVAILABLE “NT_STATUS_ABIOS_SELECTOR_NOT_AVAILABLE” 0xC0000116 0x0000013d NT_STATUS_ABIOS_INVALID_SELECTOR “NT_STATUS_ABIOS_INVALID_SELECTOR” 0xC0000117 0x0000013d NT_STATUS_NO_LDT “NT_STATUS_NO_LDT” 0xC0000118 0x0000013d NT_STATUS_INVALID_LDT_SIZE “NT_STATUS_INVALID_LDT_SIZE” 0xC0000119 0x0000013d NT_STATUS_INVALID_LDT_OFFSET “NT_STATUS_INVALID_LDT_OFFSET” 0xC000011a 0x0000013d NT_STATUS_INVALID_LDT_DESCRIPTOR “NT_STATUS_INVALID_LDT_DESCRIPTOR” 0xC000011b 0x000000c1 NT_STATUS_INVALID_IMAGE_NE_FORMAT “%1 is not a valid Windows NT application.” 0xC000011c 0x00000559 NT_STATUS_RXACT_INVALID_STATE “The transaction state of a Registry subtree is incompatible with the requested operation.” 0xC000011d 0x0000055a NT_STATUS_RXACT_COMMIT_FAILURE “An internal security database corruption has been encountered.” 0xC000011e 0x000003ee NT_STATUS_MAPPED_FILE_SIZE_ZERO “The volume for a file has been externally altered such that the opened file is no longer valid.” 0xC000011f 0x00000004 NT_STATUS_TOO_MANY_OPENED_FILES “The system cannot open the file.” 0xC0000120 0x000003e3 NT_STATUS_CANCELLED “The I/O operation has been aborted because of either a thread exit or an application request.” 0xC0000121 0x00000005 NT_STATUS_CANNOT_DELETE “Access is denied.” 0xC0000122 0x000004ba NT_STATUS_INVALID_COMPUTER_NAME “The format of the specified computer name is invalid.” 0xC0000123 0x00000005 NT_STATUS_FILE_DELETED “Access is denied.” 0xC0000124 0x0000055b NT_STATUS_SPECIAL_ACCOUNT “Cannot perform this operation on built-in accounts.” 0xC0000125 0x0000055c NT_STATUS_SPECIAL_GROUP “Cannot perform this operation on this built-in special group.” 0xC0000126 0x0000055d NT_STATUS_SPECIAL_USER “Cannot perform this operation on this built-in special user.” 0xC0000127 0x0000055e NT_STATUS_MEMBERS_PRIMARY_GROUP “The user cannot be removed from a group because the group is currently the user’s primary group.” 0xC0000128 0x00000006 NT_STATUS_FILE_CLOSED “The handle is invalid.” 0xC0000129 0x0000013d NT_STATUS_TOO_MANY_THREADS “NT_STATUS_TOO_MANY_THREADS” 0xC000012a 0x0000013d NT_STATUS_THREAD_NOT_IN_PROCESS “NT_STATUS_THREAD_NOT_IN_PROCESS” 0xC000012b 0x0000055f NT_STATUS_TOKEN_ALREADY_IN_USE “The token is already in use as a primary token.” 0xC000012c 0x0000013d NT_STATUS_PAGEFILE_QUOTA_EXCEEDED “NT_STATUS_PAGEFILE_QUOTA_EXCEEDED” 0xC000012d 0x000005af NT_STATUS_COMMITMENT_LIMIT “The paging file is too small for this operation to complete.” 0xC000012e 0x000000c1 NT_STATUS_INVALID_IMAGE_LE_FORMAT “%1 is not a valid Windows NT application.” 0xC000012f 0x000000c1 NT_STATUS_INVALID_IMAGE_NOT_MZ “%1 is not a valid Windows NT application.” 0xC0000130 0x000000c1 NT_STATUS_INVALID_IMAGE_PROTECT “%1 is not a valid Windows NT application.” 0xC0000131 0x000000c1 NT_STATUS_INVALID_IMAGE_WIN_16 “%1 is not a valid Windows NT application.” 0xC0000132 0x0000013d NT_STATUS_LOGON_SERVER_CONFLICT “NT_STATUS_LOGON_SERVER_CONFLICT” 0xC0000133 0x0000013d NT_STATUS_TIME_DIFFERENCE_AT_DC “NT_STATUS_TIME_DIFFERENCE_AT_DC” 0xC0000134 0x0000013d NT_STATUS_SYNCHRONIZATION_REQUIRED “NT_STATUS_SYNCHRONIZATION_REQUIRED” 0xC0000135 0x0000007e NT_STATUS_DLL_NOT_FOUND “The specified module could not be found.” 0xC0000136 0x0000013d NT_STATUS_OPEN_FAILED “NT_STATUS_OPEN_FAILED” 0xC0000137 0x0000013d NT_STATUS_IO_PRIVILEGE_FAILED “NT_STATUS_IO_PRIVILEGE_FAILED” 0xC0000138 0x000000b6 NT_STATUS_ORDINAL_NOT_FOUND “The operating system cannot run %1.” 0xC0000139 0x0000007f NT_STATUS_ENTRYPOINT_NOT_FOUND “The specified procedure could not be found.” 0xC000013a 0x0000013d NT_STATUS_CONTROL_C_EXIT “NT_STATUS_CONTROL_C_EXIT” 0xC000013b 0x00000040 NT_STATUS_LOCAL_DISCONNECT “The specified network name is no longer available.” 0xC000013c 0x00000040 NT_STATUS_REMOTE_DISCONNECT “The specified network name is no longer available.” 0xC000013d 0x00000033 NT_STATUS_REMOTE_RESOURCES “The remote computer is not available.” 0xC000013e 0x0000003b NT_STATUS_LINK_FAILED “An unexpected network error occurred.” 0xC000013f 0x0000003b NT_STATUS_LINK_TIMEOUT “An unexpected network error occurred.” 0xC0000140 0x0000003b NT_STATUS_INVALID_CONNECTION “An unexpected network error occurred.” 0xC0000141 0x0000003b NT_STATUS_INVALID_ADDRESS “An unexpected network error occurred.” 0xC0000142 0x0000045a NT_STATUS_DLL_INIT_FAILED “A dynamic link library (DLL) initialization routine failed.” 0xC0000143 0x0000013d NT_STATUS_MISSING_SYSTEMFILE “NT_STATUS_MISSING_SYSTEMFILE” 0xC0000144 0x0000013d NT_STATUS_UNHANDLED_EXCEPTION “NT_STATUS_UNHANDLED_EXCEPTION” 0xC0000145 0x0000013d NT_STATUS_APP_INIT_FAILURE “NT_STATUS_APP_INIT_FAILURE” 0xC0000146 0x0000013d NT_STATUS_PAGEFILE_CREATE_FAILED “NT_STATUS_PAGEFILE_CREATE_FAILED” 0xC0000147 0x0000013d NT_STATUS_NO_PAGEFILE “NT_STATUS_NO_PAGEFILE” 0xC0000148 0x0000007c NT_STATUS_INVALID_LEVEL “The system call level is not correct.” 0xC0000149 0x00000056 NT_STATUS_WRONG_PASSWORD_CORE “The specified network password is not correct.” 0xC000014a 0x0000013d NT_STATUS_ILLEGAL_FLOAT_CONTEXT “NT_STATUS_ILLEGAL_FLOAT_CONTEXT” 0xC000014b 0x0000006d NT_STATUS_PIPE_BROKEN “The pipe has been ended.” 0xC000014c 0x000003f1 NT_STATUS_REGISTRY_CORRUPT “The configuration registry database is corrupt.” 0xC000014d 0x000003f8 NT_STATUS_REGISTRY_IO_FAILED “An I/O operation initiated by the Registry failed unrecoverably. The Registry could not read in, or write out, or flush, one of the files that contain the system’s image of the Registry.” 0xC000014e 0x0000013d NT_STATUS_NO_EVENT_PAIR “NT_STATUS_NO_EVENT_PAIR” 0xC000014f 0x000003ed NT_STATUS_UNRECOGNIZED_VOLUME “The volume does not contain a recognized file system. Please make sure that all required file system drivers are loaded and that the volume is not corrupt.” 0xC0000150 0x0000045e NT_STATUS_SERIAL_NO_DEVICE_INITED “No serial device was successfully initialized. The serial driver will unload.” 0xC0000151 0x00000560 NT_STATUS_NO_SUCH_ALIAS “The specified local group does not exist.” 0xC0000152 0x00000561 NT_STATUS_MEMBER_NOT_IN_ALIAS “The specified account name is not a member of the local group.” 0xC0000153 0x00000562 NT_STATUS_MEMBER_IN_ALIAS “The specified account name is already a member of the local group.” 0xC0000154 0x00000563 NT_STATUS_ALIAS_EXISTS “The specified local group already exists.” 0xC0000155 0x00000564 NT_STATUS_LOGON_NOT_GRANTED “Logon failure: the user has not been granted the requested logon type at this computer.” 0xC0000156 0x00000565 NT_STATUS_TOO_MANY_SECRETS “The maximum number of secrets that may be stored in a single system has been exceeded.” 0xC0000157 0x00000566 NT_STATUS_SECRET_TOO_LONG “The length of a secret exceeds the maximum length allowed.” 0xC0000158 0x00000567 NT_STATUS_INTERNAL_DB_ERROR “The local security authority database contains an internal inconsistency.” 0xC0000159 0x000003ef NT_STATUS_FULLSCREEN_MODE “The requested operation cannot be performed in full-screen mode.” 0xC000015a 0x00000568 NT_STATUS_TOO_MANY_CONTEXT_IDS “During a logon attempt, the user’s security context accumulated too many security IDs.” 0xC000015b 0x00000569 NT_STATUS_LOGON_TYPE_NOT_GRANTED “Logon failure: the user has not been granted the requested logon type at this computer.” 0xC000015c 0x000003f9 NT_STATUS_NOT_REGISTRY_FILE “The system has attempted to load or restore a file into the Registry, but the specified file is not in a Registry file format.” 0xC000015d 0x0000056a NT_STATUS_NT_CROSS_ENCRYPTION_REQUIRED “A cross-encrypted password is necessary to change a user password.” 0xC000015e 0x0000013d NT_STATUS_DOMAIN_CTRLR_CONFIG_ERROR “NT_STATUS_DOMAIN_CTRLR_CONFIG_ERROR” 0xC000015f 0x0000045d NT_STATUS_FT_MISSING_MEMBER “The request could not be performed because of an I/O device error.” 0xC0000160 0x0000013d NT_STATUS_ILL_FORMED_SERVICE_ENTRY “NT_STATUS_ILL_FORMED_SERVICE_ENTRY” 0xC0000161 0x0000013d NT_STATUS_ILLEGAL_CHARACTER “NT_STATUS_ILLEGAL_CHARACTER” 0xC0000162 0x00000459 NT_STATUS_UNMAPPABLE_CHARACTER “No mapping for the Unicode character exists in the target multi-byte code page.” 0xC0000163 0x0000013d NT_STATUS_UNDEFINED_CHARACTER “NT_STATUS_UNDEFINED_CHARACTER” 0xC0000164 0x0000013d NT_STATUS_FLOPPY_VOLUME “NT_STATUS_FLOPPY_VOLUME” 0xC0000165 0x00000462 NT_STATUS_FLOPPY_ID_MARK_NOT_FOUND “No ID address mark was found on the floppy disk.” 0xC0000166 0x00000463 NT_STATUS_FLOPPY_WRONG_CYLINDER “Mismatch between the floppy disk sector ID field and the floppy disk controller track address.” 0xC0000167 0x00000464 NT_STATUS_FLOPPY_UNKNOWN_ERROR “The floppy disk controller reported an error that is not recognized by the floppy disk driver.” 0xC0000168 0x00000465 NT_STATUS_FLOPPY_BAD_REGISTERS “The floppy disk controller returned inconsistent results in its registers.” 0xC0000169 0x00000466 NT_STATUS_DISK_RECALIBRATE_FAILED “While accessing the hard disk, a recalibrate operation failed, even after retries.” 0xC000016a 0x00000467 NT_STATUS_DISK_OPERATION_FAILED “While accessing the hard disk, a disk operation failed even after retries.” 0xC000016b 0x00000468 NT_STATUS_DISK_RESET_FAILED “While accessing the hard disk, a disk controller reset was needed, but even that failed.” 0xC000016c 0x0000045f NT_STATUS_SHARED_IRQ_BUSY “Unable to open a device that was sharing an interrupt request (IRQ) with other devices. At least one other device that uses that IRQ was already opened.” 0xC000016d 0x0000045d NT_STATUS_FT_ORPHANING “The request could not be performed because of an I/O device error.” 0xC0000172 0x00000451 NT_STATUS_PARTITION_FAILURE “Tape could not be partitioned.” 0xC0000173 0x00000452 NT_STATUS_INVALID_BLOCK_LENGTH “When accessing a new tape of a multivolume partition, the current blocksize is incorrect.” 0xC0000174 0x00000453 NT_STATUS_DEVICE_NOT_PARTITIONED “Tape partition information could not be found when loading a tape.” 0xC0000175 0x00000454 NT_STATUS_UNABLE_TO_LOCK_MEDIA “Unable to lock the media eject mechanism.” 0xC0000176 0x00000455 NT_STATUS_UNABLE_TO_UNLOAD_MEDIA “Unable to unload the media.” 0xC0000177 0x00000469 NT_STATUS_EOM_OVERFLOW “Physical end of tape encountered.” 0xC0000178 0x00000458 NT_STATUS_NO_MEDIA “No media in drive.” 0xC000017a 0x0000056b NT_STATUS_NO_SUCH_MEMBER “A new member could not be added to a local group because the member does not exist.” 0xC000017b 0x0000056c NT_STATUS_INVALID_MEMBER “A new member could not be added to a local group because the member has the wrong account type.” 0xC000017c 0x000003fa NT_STATUS_KEY_DELETED “Illegal operation attempted on a Registry key which has been marked for deletion.” 0xC000017d 0x000003fb NT_STATUS_NO_LOG_SPACE “System could not allocate the required space in a Registry log.” 0xC000017e 0x0000056d NT_STATUS_TOO_MANY_SIDS “Too many security IDs have been specified.” 0xC000017f 0x0000056e NT_STATUS_LM_CROSS_ENCRYPTION_REQUIRED “A cross-encrypted password is necessary to change this user password.” 0xC0000180 0x000003fc NT_STATUS_KEY_HAS_CHILDREN “Cannot create a symbolic link in a Registry key that already has subkeys or values.” 0xC0000181 0x000003fd NT_STATUS_CHILD_MUST_BE_VOLATILE “Cannot create a stable subkey under a volatile parent key.” 0xC0000182 0x00000057 NT_STATUS_DEVICE_CONFIGURATION_ERROR “The parameter is incorrect.” 0xC0000183 0x0000045d NT_STATUS_DRIVER_INTERNAL_ERROR “The request could not be performed because of an I/O device error.” 0xC0000184 0x00000016 NT_STATUS_INVALID_DEVICE_STATE “The device does not recognize the command.” 0xC0000185 0x0000045d NT_STATUS_IO_DEVICE_ERROR “The request could not be performed because of an I/O device error.” 0xC0000186 0x0000045d NT_STATUS_DEVICE_PROTOCOL_ERROR “The request could not be performed because of an I/O device error.” 0xC0000187 0x0000013d NT_STATUS_BACKUP_CONTROLLER “NT_STATUS_BACKUP_CONTROLLER” 0xC0000188 0x000005de NT_STATUS_LOG_FILE_FULL “The event log file is full.” 0xC0000189 0x00000013 NT_STATUS_TOO_LATE “The media is write protected.” 0xC000018a 0x000006fa NT_STATUS_NO_TRUST_LSA_SECRET “The workstation does not have a trust secret.” 0xC000018b 0x000006fb NT_STATUS_NO_TRUST_SAM_ACCOUNT “The SAM database on the Windows NT Server does not have a computer account for this workstation trust relationship.” 0xC000018c 0x000006fc NT_STATUS_TRUSTED_DOMAIN_FAILURE “The trust relationship between the primary domain and the trusted domain failed.” 0xC000018d 0x000006fd NT_STATUS_TRUSTED_RELATIONSHIP_FAILURE “The trust relationship between this workstation and the primary domain failed.” 0xC000018e 0x000005dc NT_STATUS_EVENTLOG_FILE_CORRUPT “The event log file is corrupt.” 0xC000018f 0x000005dd NT_STATUS_EVENTLOG_CANT_START “No event log file could be opened, so the event logging service did not start.” 0xC0000190 0x000006fe NT_STATUS_TRUST_FAILURE “The network logon failed.” 0xC0000191 0x0000013d NT_STATUS_MUTANT_LIMIT_EXCEEDED “NT_STATUS_MUTANT_LIMIT_EXCEEDED” 0xC0000192 0x00000700 NT_STATUS_NETLOGON_NOT_STARTED “An attempt was made to logon, but the network logon service was not started.” 0xC0000193 0x00000701 NT_STATUS_ACCOUNT_EXPIRED “The user’s account has expired.” 0xC0000194 0x0000046b NT_STATUS_POSSIBLE_DEADLOCK “A potential deadlock condition has been detected.” 0xC0000195 0x000004c3 NT_STATUS_NETWORK_CREDENTIAL_CONFLICT “The credentials supplied conflict with an existing set of credentials.” 0xC0000196 0x000004c4 NT_STATUS_REMOTE_SESSION_LIMIT “An attempt was made to establish a session to a network server, but there are already too many sessions established to that server.” 0xC0000197 0x000005df NT_STATUS_EVENTLOG_FILE_CHANGED “The event log file has changed between reads.” 0xC0000198 0x0000070f NT_STATUS_NOLOGON_INTERDOMAIN_TRUST_ACCOUNT “The account used is an interdomain trust account. Use your global user account or local user account to access this server.” 0xC0000199 0x00000710 NT_STATUS_NOLOGON_WORKSTATION_TRUST_ACCOUNT “The account used is a Computer Account. Use your global user account or local user account to access this server.” 0xC000019a 0x00000711 NT_STATUS_NOLOGON_SERVER_TRUST_ACCOUNT “The account used is an server trust account. Use your global user account or local user account to access this server.” 0xC000019b 0x00000712 NT_STATUS_DOMAIN_TRUST_INCONSISTENT “The name or security ID (SID) of the domain specified is inconsistent with the trust information for that domain.” 0xC000019c 0x0000013d NT_STATUS_FS_DRIVER_REQUIRED “NT_STATUS_FS_DRIVER_REQUIRED” 0xC0000202 0x00000572 NT_STATUS_NO_USER_SESSION_KEY “There is no user session key for the specified logon session.” 0xC0000203 0x0000003b NT_STATUS_USER_SESSION_DELETED “An unexpected network error occurred.” 0xC0000204 0x00000717 NT_STATUS_RESOURCE_LANG_NOT_FOUND “The specified resource language ID cannot be found in the image file.” 0xC0000205 0x0000046a NT_STATUS_INSUFF_SERVER_RESOURCES “Not enough server storage is available to process this command.” 0xC0000206 0x000006f8 NT_STATUS_INVALID_BUFFER_SIZE “The supplied user buffer is not valid for the requested operation.” 0xC0000207 0x000004be NT_STATUS_INVALID_ADDRESS_COMPONENT “The format of the specified network name is invalid.” 0xC0000208 0x000004be NT_STATUS_INVALID_ADDRESS_WILDCARD “The format of the specified network name is invalid.” 0xC0000209 0x00000044 NT_STATUS_TOO_MANY_ADDRESSES “The name limit for the local computer network adapter card was exceeded.” 0xC000020a 0x00000034 NT_STATUS_ADDRESS_ALREADY_EXISTS “A duplicate name exists on the network.” 0xC000020b 0x00000040 NT_STATUS_ADDRESS_CLOSED “The specified network name is no longer available.” 0xC000020c 0x00000040 NT_STATUS_CONNECTION_DISCONNECTED “The specified network name is no longer available.” 0xC000020d 0x00000040 NT_STATUS_CONNECTION_RESET “The specified network name is no longer available.” 0xC000020e 0x00000044 NT_STATUS_TOO_MANY_NODES “The name limit for the local computer network adapter card was exceeded.” 0xC000020f 0x0000003b NT_STATUS_TRANSACTION_ABORTED “An unexpected network error occurred.” 0xC0000210 0x0000003b NT_STATUS_TRANSACTION_TIMED_OUT “An unexpected network error occurred.” 0xC0000211 0x0000003b NT_STATUS_TRANSACTION_NO_RELEASE “An unexpected network error occurred.” 0xC0000212 0x0000003b NT_STATUS_TRANSACTION_NO_MATCH “An unexpected network error occurred.” 0xC0000213 0x0000003b NT_STATUS_TRANSACTION_RESPONDED “An unexpected network error occurred.” 0xC0000214 0x0000003b NT_STATUS_TRANSACTION_INVALID_ID “An unexpected network error occurred.” 0xC0000215 0x0000003b NT_STATUS_TRANSACTION_INVALID_TYPE “An unexpected network error occurred.” 0xC0000216 0x00000032 NT_STATUS_NOT_SERVER_SESSION “The network request is not supported.” 0xC0000217 0x00000032 NT_STATUS_NOT_CLIENT_SESSION “The network request is not supported.” 0xC0000218 0x0000013d NT_STATUS_CANNOT_LOAD_REGISTRY_FILE “NT_STATUS_CANNOT_LOAD_REGISTRY_FILE” 0xC0000219 0x0000013d NT_STATUS_DEBUG_ATTACH_FAILED “NT_STATUS_DEBUG_ATTACH_FAILED” 0xC000021a 0x0000013d NT_STATUS_SYSTEM_PROCESS_TERMINATED “NT_STATUS_SYSTEM_PROCESS_TERMINATED” 0xC000021b 0x0000013d NT_STATUS_DATA_NOT_ACCEPTED “NT_STATUS_DATA_NOT_ACCEPTED” 0xC000021c 0x000017e6 NT_STATUS_NO_BROWSER_SERVERS_FOUND “The list of servers for this workgroup is not currently available” 0xC000021d 0x0000013d NT_STATUS_VDM_HARD_ERROR “NT_STATUS_VDM_HARD_ERROR” 0xC000021e 0x0000013d NT_STATUS_DRIVER_CANCEL_TIMEOUT “NT_STATUS_DRIVER_CANCEL_TIMEOUT” 0xC000021f 0x0000013d NT_STATUS_REPLY_MESSAGE_MISMATCH “NT_STATUS_REPLY_MESSAGE_MISMATCH” 0xC0000220 0x0000046c NT_STATUS_MAPPED_ALIGNMENT “The base address or the file offset specified does not have the proper alignment.” 0xC0000221 0x000000c1 NT_STATUS_IMAGE_CHECKSUM_MISMATCH “%1 is not a valid Windows NT application.” 0xC0000222 0x0000013d NT_STATUS_LOST_WRITEBEHIND_DATA “NT_STATUS_LOST_WRITEBEHIND_DATA” 0xC0000223 0x0000013d NT_STATUS_CLIENT_SERVER_PARAMETERS_INVALID “NT_STATUS_CLIENT_SERVER_PARAMETERS_INVALID” 0xC0000224 0x00000773 NT_STATUS_PASSWORD_MUST_CHANGE “The user must change his password before he logs on the first time.” 0xC0000225 0x0000013d NT_STATUS_NOT_FOUND “NT_STATUS_NOT_FOUND” 0xC0000226 0x0000013d NT_STATUS_NOT_TINY_STREAM “NT_STATUS_NOT_TINY_STREAM” 0xC0000227 0x0000013d NT_STATUS_RECOVERY_FAILURE “NT_STATUS_RECOVERY_FAILURE” 0xC0000228 0x0000013d NT_STATUS_STACK_OVERFLOW_READ “NT_STATUS_STACK_OVERFLOW_READ” 0xC0000229 0x0000013d NT_STATUS_FAIL_CHECK “NT_STATUS_FAIL_CHECK” 0xC000022a 0xc000022a NT_STATUS_DUPLICATE_OBJECTID “NT_STATUS_DUPLICATE_OBJECTID” 0xC000022b 0xc000022b NT_STATUS_OBJECTID_EXISTS “NT_STATUS_OBJECTID_EXISTS” 0xC000022c 0x0000013d NT_STATUS_CONVERT_TO_LARGE “NT_STATUS_CONVERT_TO_LARGE” 0xC000022d 0x0000013d NT_STATUS_RETRY “NT_STATUS_RETRY” 0xC000022e 0x0000013d NT_STATUS_FOUND_OUT_OF_SCOPE “NT_STATUS_FOUND_OUT_OF_SCOPE” 0xC000022f 0x0000013d NT_STATUS_ALLOCATE_BUCKET “NT_STATUS_ALLOCATE_BUCKET” 0xC0000230 0x0000013d NT_STATUS_PROPSET_NOT_FOUND “NT_STATUS_PROPSET_NOT_FOUND” 0xC0000231 0x0000013d NT_STATUS_MARSHALL_OVERFLOW “NT_STATUS_MARSHALL_OVERFLOW” 0xC0000232 0x0000013d NT_STATUS_INVALID_VARIANT “NT_STATUS_INVALID_VARIANT” 0xC0000233 0x00000774 NT_STATUS_DOMAIN_CONTROLLER_NOT_FOUND “Could not find the domain controller for this domain.” 0xC0000234 0x00000775 NT_STATUS_ACCOUNT_LOCKED_OUT “The referenced account is currently locked out and may not be logged on to.” 0xC0000235 0x00000006 NT_STATUS_HANDLE_NOT_CLOSABLE “The handle is invalid.” 0xC0000236 0x000004c9 NT_STATUS_CONNECTION_REFUSED “The remote system refused the network connection.” 0xC0000237 0x000004ca NT_STATUS_GRACEFUL_DISCONNECT “The network connection was gracefully closed.” 0xC0000238 0x000004cb NT_STATUS_ADDRESS_ALREADY_ASSOCIATED “The network transport endpoint already has an address associated with it.” 0xC0000239 0x000004cc NT_STATUS_ADDRESS_NOT_ASSOCIATED “An address has not yet been associated with the network endpoint.” 0xC000023a 0x000004cd NT_STATUS_CONNECTION_INVALID “An operation was attempted on a non-existent network connection.” 0xC000023b 0x000004ce NT_STATUS_CONNECTION_ACTIVE “An invalid operation was attempted on an active network connection.” 0xC000023c 0x000004cf NT_STATUS_NETWORK_UNREACHABLE “The remote network is not reachable by the transport.” 0xC000023d 0x000004d0 NT_STATUS_HOST_UNREACHABLE “The remote system is not reachable by the transport.” 0xC000023e 0x000004d1 NT_STATUS_PROTOCOL_UNREACHABLE “The remote system does not support the transport protocol.” 0xC000023f 0x000004d2 NT_STATUS_PORT_UNREACHABLE “No service is operating at the destination network endpoint on the remote system.” 0xC0000240 0x000004d3 NT_STATUS_REQUEST_ABORTED “The request was aborted.” 0xC0000241 0x000004d4 NT_STATUS_CONNECTION_ABORTED “The network connection was aborted by the local system.” 0xC0000242 0x0000013d NT_STATUS_BAD_COMPRESSION_BUFFER “NT_STATUS_BAD_COMPRESSION_BUFFER” 0xC0000243 0x000004c8 NT_STATUS_USER_MAPPED_FILE “The requested operation cannot be performed on a file with a user mapped section open.” 0xC0000244 0x0000013d NT_STATUS_AUDIT_FAILED “NT_STATUS_AUDIT_FAILED” 0xC0000245 0x0000013d NT_STATUS_TIMER_RESOLUTION_NOT_SET “NT_STATUS_TIMER_RESOLUTION_NOT_SET” 0xC0000246 0x000004d6 NT_STATUS_CONNECTION_COUNT_LIMIT “A connection to the server could not be made because the limit on the number of concurrent connections for this account has been reached.” 0xC0000247 0x000004d7 NT_STATUS_LOGIN_TIME_RESTRICTION “Attempting to login during an unauthorized time of day for this account.” 0xC0000248 0x000004d8 NT_STATUS_LOGIN_WKSTA_RESTRICTION “The account is not authorized to login from this station.” 0xC0000249 0x000000c1 NT_STATUS_IMAGE_MP_UP_MISMATCH “%1 is not a valid Windows NT application.” 0xC0000250 0x0000013d NT_STATUS_INSUFFICIENT_LOGON_INFO “NT_STATUS_INSUFFICIENT_LOGON_INFO” 0xC0000251 0x0000013d NT_STATUS_BAD_DLL_ENTRYPOINT “NT_STATUS_BAD_DLL_ENTRYPOINT” 0xC0000252 0x0000013d NT_STATUS_BAD_SERVICE_ENTRYPOINT “NT_STATUS_BAD_SERVICE_ENTRYPOINT” 0xC0000253 0x0000054f NT_STATUS_LPC_REPLY_LOST “The security account database contains an internal inconsistency.” 0xC0000254 0x0000013d NT_STATUS_IP_ADDRESS_CONFLICT1 “NT_STATUS_IP_ADDRESS_CONFLICT1” 0xC0000255 0x0000013d NT_STATUS_IP_ADDRESS_CONFLICT2 “NT_STATUS_IP_ADDRESS_CONFLICT2” 0xC0000256 0x0000013d NT_STATUS_REGISTRY_QUOTA_LIMIT “NT_STATUS_REGISTRY_QUOTA_LIMIT” 0xC0000257 0x000004d0 NT_STATUS_PATH_NOT_COVERED “The remote system is not reachable by the transport.” 0xC0000258 0x0000013d NT_STATUS_NO_CALLBACK_ACTIVE “NT_STATUS_NO_CALLBACK_ACTIVE” 0xC0000259 0x00000573 NT_STATUS_LICENSE_QUOTA_EXCEEDED “The service being accessed is licensed for a particular number of connections. No more connections can be made to the service at this time because there are already as many connections as the service can accept.” 0xC000025a 0x0000013d NT_STATUS_PWD_TOO_SHORT “NT_STATUS_PWD_TOO_SHORT” 0xC000025b 0x0000013d NT_STATUS_PWD_TOO_RECENT “NT_STATUS_PWD_TOO_RECENT” 0xC000025c 0x0000013d NT_STATUS_PWD_HISTORY_CONFLICT “NT_STATUS_PWD_HISTORY_CONFLICT” 0xC000025e 0x00000422 NT_STATUS_PLUGPLAY_NO_DEVICE “The specified service is disabled and cannot be started.” 0xC000025f 0x0000013d NT_STATUS_UNSUPPORTED_COMPRESSION “NT_STATUS_UNSUPPORTED_COMPRESSION” 0xC0000260 0x0000013d NT_STATUS_INVALID_HW_PROFILE “NT_STATUS_INVALID_HW_PROFILE” 0xC0000261 0x0000013d NT_STATUS_INVALID_PLUGPLAY_DEVICE_PATH “NT_STATUS_INVALID_PLUGPLAY_DEVICE_PATH” 0xC0000262 0x000000b6 NT_STATUS_DRIVER_ORDINAL_NOT_FOUND “The operating system cannot run %1.” 0xC0000263 0x0000007f NT_STATUS_DRIVER_ENTRYPOINT_NOT_FOUND “The specified procedure could not be found.” 0xC0000264 0x00000120 NT_STATUS_RESOURCE_NOT_OWNED “Attempt to release mutex not owned by caller.” 0xC0000265 0x00000476 NT_STATUS_TOO_MANY_LINKS “An attempt was made to create more links on a file than the file system supports.” 0xC0000266 0x0000013d NT_STATUS_QUOTA_LIST_INCONSISTENT “NT_STATUS_QUOTA_LIST_INCONSISTENT” 0xC0000267 0x0000013d NT_STATUS_FILE_IS_OFFLINE “NT_STATUS_FILE_IS_OFFLINE” 0xC0000275 0x0000013d NT_STATUS_NOT_A_REPARSE_POINT “NT_STATUS_NOT_A_REPARSE_POINT” 0xC0000EDE 0x0000013d NT_STATUS_NO_SUCH_JOB “NT_STATUS_NO_SUCH_JOB”

www.stbsuite.com

NTSTATUS Error Code List | David Vielmetter

Status Value Description STATUS_WAIT_0 0x0 STATUS_SUCCESS STATUS_SUCCESS 0x0 STATUS_SUCCESS STATUS_WAIT_1 0x1 STATUS_WAIT_1 STATUS_WAIT_2 0x2 STATUS_WAIT_2 STATUS_WAIT_3 0x3 STATUS_WAIT_3 STATUS_WAIT_63 0x3F STATUS_WAIT_63 STATUS_ABANDONED 0x80 STATUS_ABANDONED_WAIT_0 STATUS_ABANDONED_WAIT_0 0x80 STATUS_ABANDONED_WAIT_0 STATUS_ABANDONED_WAIT_63 0xBF STATUS_ABANDONED_WAIT_63 STATUS_USER_APC 0xC0 STATUS_USER_APC STATUS_KERNEL_APC 0x100 STATUS_KERNEL_APC STATUS_ALERTED 0x101 STATUS_ALERTED STATUS_TIMEOUT 0x102 STATUS_TIMEOUT STATUS_PENDING 0x103 The operation that was requested is pending completion. STATUS_REPARSE 0x104 A reparse should be performed by the Object Manager since the name of the file resulted in a symbolic link. STATUS_MORE_ENTRIES 0x105 Returned by enumeration APIs to indicate more information is available to successive calls. STATUS_NOT_ALL_ASSIGNED 0x106 Indicates not all privileges or groups referenced are assigned to the caller.This allows, for example, all privileges to be disabled without having to know exactly which privileges are assigned. STATUS_SOME_NOT_MAPPED 0x107 Some of the information to be translated has not been translated. STATUS_OPLOCK_BREAK_IN_PROGRESS 0x108 An open/create operation completed while an oplock break is underway. STATUS_VOLUME_MOUNTED 0x109 A new volume has been mounted by a file system. STATUS_RXACT_COMMITTED 0x10A This success level status indicates that the transaction state already exists for the registry sub-tree, but that a transaction commit was previously aborted. The commit has now been completed. STATUS_NOTIFY_CLEANUP 0x10B This indicates that a notify change request has been completed due to closing the handle which made the notify change request. STATUS_NOTIFY_ENUM_DIR 0x10C This indicates that a notify change request is being completed and that the information is not being returned in the caller’s buffer.The caller now needs to enumerate the files to find the changes. STATUS_NO_QUOTAS_FOR_ACCOUNT 0x10D {No Quotas}No system quota limits are specifically set for this account. STATUS_PAGE_FAULT_TRANSITION 0x110 Page fault was a transition fault. STATUS_PAGE_FAULT_DEMAND_ZERO 0x111 Page fault was a demand zero fault. STATUS_PAGE_FAULT_COPY_ON_WRITE 0x112 Page fault was a demand zero fault. STATUS_PAGE_FAULT_GUARD_PAGE 0x113 Page fault was a demand zero fault. STATUS_PAGE_FAULT_PAGING_FILE 0x114 Page fault was satisfied by reading from a secondary storage device. STATUS_CACHE_PAGE_LOCKED 0x115 Cached page was locked during operation. STATUS_CRASH_DUMP 0x116 Crash dump exists in paging file. STATUS_BUFFER_ALL_ZEROS 0x117 Specified buffer contains all zeros. STATUS_REPARSE_OBJECT 0x118 A reparse should be performed by the Object Manager since the name of the file resulted in a symbolic link. STATUS_TRANSLATION_COMPLETE 0x120 The translator has translated these resources into the global space and no further translations should be performed. STATUS_NOTHING_TO_TERMINATE 0x122 A process being terminated has no threads to terminate. STATUS_PROCESS_NOT_IN_JOB 0x123 The specified process is not part of a job. STATUS_PROCESS_IN_JOB 0x124 The specified process is part of a job. STATUS_VOLSNAP_HIBERNATE_READY 0x125 {Volume Shadow Copy Service}The system is now ready for hibernation. STATUS_PROCESS_CLONED 0x129 The current process is a cloned process. STATUS_FILE_LOCKED_WITH_WRITERS 0x12B The file was locked and at least one user of the file can write. STATUS_VALID_IMAGE_HASH 0x12C The file image hash is valid. STATUS_RING_PREVIOUSLY_EMPTY 0x210 The specified ring buffer was empty before the packet was successfully inserted. STATUS_RING_PREVIOUSLY_FULL 0x211 The specified ring buffer was full before the packet was successfully removed. STATUS_RING_NEWLY_EMPTY 0x213 The specified ring buffer has, with the removal of the current packet, now become empty. STATUS_OPLOCK_HANDLE_CLOSED 0x216 The handle with which this oplock was associated has been closed. The oplock is now broken. STATUS_WAIT_FOR_OPLOCK 0x367 An operation is blocked waiting for an oplock. DBG_EXCEPTION_HANDLED 0x10001 Debugger handled exception DBG_CONTINUE 0x10002 Debugger continued STATUS_FLT_IO_COMPLETE 0x1C0001 The IO was completed by a filter. STATUS_DIS_ATTRIBUTE_BUILT 0x3C0001 An attribute was successfully built. STATUS_OBJECT_NAME_EXISTS 0x40000000 {Object Exists}An attempt was made to create an object and the object name already existed. STATUS_THREAD_WAS_SUSPENDED 0x40000001 {Thread Suspended}A thread termination occurred while the thread was suspended. The thread was resumed, and termination proceeded. STATUS_WORKING_SET_LIMIT_RANGE 0x40000002 {Working Set Range Error}An attempt was made to set the working set minimum or maximum to values which are outside of the allowable range. STATUS_IMAGE_NOT_AT_BASE 0x40000003 {Image Relocated}An image file could not be mapped at the address specified in the image file. Local fixups must be performed on this image. STATUS_RXACT_STATE_CREATED 0x40000004 This informational level status indicates that a specified registry sub-tree transaction state did not yet exist and had to be created. STATUS_SEGMENT_NOTIFICATION 0x40000005 {Segment Load}A virtual DOS machine (VDM) is loading, unloading, or moving an MS-DOS or Win16 program segment image.

An exception is raised so a debugger can load, unload or track symbols and breakpoints within these 16-bit segments.

STATUS_LOCAL_USER_SESSION_KEY 0x40000006 {Local Session Key}A user session key was requested for a local RPC connection. The session key returned is a constant value and not unique to this connection. STATUS_BAD_CURRENT_DIRECTORY 0x40000007 {Invalid Current Directory}The process cannot switch to the startup current directory hs.

Select OK to set current directory to hs, or select CANCEL to exit.

STATUS_SERIAL_MORE_WRITES 0x40000008 {Serial IOCTL Complete}A serial I/O operation was completed by another write to a serial port.

(The IOCTL_SERIAL_XOFF_COUNTER reached zero.)

STATUS_REGISTRY_RECOVERED 0x40000009 {Registry Recovery}One of the files containing the system’s Registry data had to be recovered by use of a log or alternate copy. The recovery was successful. STATUS_FT_WRITE_RECOVERY 0x4000000B {Redundant Write}To satisfy a write request, the NT fault-tolerant file system successfully wrote a redundant copy of the information.

This was done because the file system encountered a failure on a member of the fault-tolerant volume, but was not able to reassign the failing area of the device.

STATUS_SERIAL_COUNTER_TIMEOUT 0x4000000C {Serial IOCTL Timeout}A serial I/O operation completed because the time-out period expired. (The IOCTL_SERIAL_XOFF_COUNTER had not reached zero.) STATUS_NULL_LM_PASSWORD 0x4000000D {Password Too Complex}The Windows password is too complex to be converted to a LAN Manager password. The LAN Manager password returned is a NULL string. STATUS_RECEIVE_PARTIAL 0x4000000F {Partial Data Received}The network transport returned partial data to its client. The remaining data will be sent later. STATUS_RECEIVE_EXPEDITED 0x40000010 {Expedited Data Received}The network transport returned data to its client that was marked as expedited by the remote system. STATUS_EVENT_DONE 0x40000012 {TDI Event Done}The TDI indication has completed successfully. STATUS_EVENT_PENDING 0x40000013 {TDI Event Pending}The TDI indication has entered the pending state. STATUS_CHECKING_FILE_SYSTEM 0x40000014 Checking file system on wZ STATUS_FATAL_APP_EXIT 0x40000015 {Fatal Application Exit}hs STATUS_PREDEFINED_HANDLE 0x40000016 The specified registry key is referenced by a predefined handle. STATUS_WAS_UNLOCKED 0x40000017 {Page Unlocked}The page protection of a locked page was changed to ‘No Access’ and the page was unlocked from memory and from the process. STATUS_SERVICE_NOTIFICATION 0x40000018 hs STATUS_WAS_LOCKED 0x40000019 {Page Locked}One of the pages to lock was already locked. STATUS_ALREADY_WIN32 0x4000001B STATUS_ALREADY_WIN32 STATUS_WX86_UNSIMULATE 0x4000001C Exception status code used by Win32 x86 emulation subsystem. STATUS_WX86_CONTINUE 0x4000001D Exception status code used by Win32 x86 emulation subsystem. STATUS_WX86_SINGLE_STEP 0x4000001E Exception status code used by Win32 x86 emulation subsystem. STATUS_WX86_BREAKPOINT 0x4000001F Exception status code used by Win32 x86 emulation subsystem. STATUS_WX86_EXCEPTION_CONTINUE 0x40000020 Exception status code used by Win32 x86 emulation subsystem. STATUS_WX86_EXCEPTION_CHAIN 0x40000022 Exception status code used by Win32 x86 emulation subsystem. STATUS_NO_YIELD_PERFORMED 0x40000024 A yield execution was performed and no thread was available to run. STATUS_TIMER_RESUME_IGNORED 0x40000025 The resumable flag to a timer API was ignored. STATUS_ARBITRATION_UNHANDLED 0x40000026 The arbiter has deferred arbitration of these resources to its parent STATUS_CARDBUS_NOT_SUPPORTED 0x40000027 The device “hs” has detected a CardBus card in its slot, but the firmware on this system is not configured to allow the CardBus controller to be run in CardBus mode.The operating system will currently accept only 16-bit (R2) pc-cards on this controller. STATUS_WX86_CREATEWX86TIB 0x40000028 Exception status code used by Win32 x86 emulation subsystem. STATUS_MP_PROCESSOR_MISMATCH 0x40000029 The CPUs in this multiprocessor system are not all the same revision level. To use all processors the operating system restricts itself to the features of the least capable processor in the system. Should problems occur with this system, contact the CPU manufacturer to see if this mix of processors is supported. STATUS_HIBERNATED 0x4000002A The system was put into hibernation. STATUS_RESUME_HIBERNATION 0x4000002B The system was resumed from hibernation. STATUS_MESSAGE_RETRIEVED 0x4000002E The ALPC message being canceled has already been retrieved from the queue on the other side. STATUS_ABANDON_HIBERFILE 0x40000033 A valid hibernation file has been invalidated and should be abandoned. STATUS_BIZRULES_NOT_ENABLED 0x40000034 Business rule scripts are disabled for the calling application. STATUS_FT_READ_FROM_COPY 0x40000035 The specified copy of the requested data was successfully read. STATUS_IMAGE_AT_DIFFERENT_BASE 0x40000036 {Image Relocated}An image file was mapped at a different address from the one specified in the image file but fixups will still be automatically performed on the image. DBG_REPLY_LATER 0x40010001 Debugger will reply later. DBG_UNABLE_TO_PROVIDE_HANDLE 0x40010002 Debugger cannot provide handle. DBG_TERMINATE_THREAD 0x40010003 Debugger terminated thread. DBG_TERMINATE_PROCESS 0x40010004 Debugger terminated process. DBG_CONTROL_C 0x40010005 Debugger got control C. DBG_PRINTEXCEPTION_C 0x40010006 Debugger printed exception on control C. DBG_RIPEXCEPTION 0x40010007 Debugger received RIP exception. DBG_CONTROL_BREAK 0x40010008 Debugger received control break. DBG_COMMAND_EXCEPTION 0x40010009 Debugger command communication exception. STATUS_GUARD_PAGE_VIOLATION 0x80000001 {EXCEPTION}Guard Page Exception

A page of memory that marks the end of a data structure, such as a stack or an array, has been accessed.

STATUS_DATATYPE_MISALIGNMENT 0x80000002 {EXCEPTION}Alignment Fault

A datatype misalignment was detected in a load or store instruction.

STATUS_BREAKPOINT 0x80000003 {EXCEPTION}Breakpoint

A breakpoint has been reached.

STATUS_SINGLE_STEP 0x80000004 {EXCEPTION}Single Step

A single step or trace operation has just been completed.

STATUS_BUFFER_OVERFLOW 0x80000005 {Buffer Overflow}The data was too large to fit into the specified buffer. STATUS_NO_MORE_FILES 0x80000006 {No More Files}No more files were found which match the file specification. STATUS_WAKE_SYSTEM_DEBUGGER 0x80000007 {Kernel Debugger Awakened}the system debugger was awakened by an interrupt. STATUS_HANDLES_CLOSED 0x8000000A {Handles Closed}Handles to objects have been automatically closed as a result of the requested operation. STATUS_NO_INHERITANCE 0x8000000B {Non-Inheritable ACL}An access control list (ACL) contains no components that can be inherited. STATUS_GUID_SUBSTITUTION_MADE 0x8000000C {GUID Substitution}During the translation of a global identifier (GUID) to a Windows security ID (SID), no administratively-defined GUID prefix was found. A substitute prefix was used, which will not compromise system security. However, this may provide a more restrictive access than intended. STATUS_PARTIAL_COPY 0x8000000D {Partial Copy}Due to protection conflicts not all the requested bytes could be copied. STATUS_DEVICE_PAPER_EMPTY 0x8000000E {Out of Paper}The printer is out of paper. STATUS_DEVICE_POWERED_OFF 0x8000000F {Device Power Is Off}The printer power has been turned off. STATUS_DEVICE_OFF_LINE 0x80000010 {Device Offline}The printer has been taken offline. STATUS_DEVICE_BUSY 0x80000011 {Device Busy}The device is currently busy. STATUS_NO_MORE_EAS 0x80000012 {No More EAs}No more extended attributes (EAs) were found for the file. STATUS_INVALID_EA_NAME 0x80000013 {Illegal EA}The specified extended attribute (EA) name contains at least one illegal character. STATUS_EA_LIST_INCONSISTENT 0x80000014 {Inconsistent EA List}The extended attribute (EA) list is inconsistent. STATUS_INVALID_EA_FLAG 0x80000015 {Invalid EA Flag}An invalid extended attribute (EA) flag was set. STATUS_VERIFY_REQUIRED 0x80000016 {Verifying Disk}The media has changed and a verify operation is in progress so no reads or writes may be performed to the device, except those used in the verify operation. STATUS_EXTRANEOUS_INFORMATION 0x80000017 {Too Much Information}The specified access control list (ACL) contained more information than was expected. STATUS_RXACT_COMMIT_NECESSARY 0x80000018 This warning level status indicates that the transaction state already exists for the registry sub-tree, but that a transaction commit was previously aborted.The commit has NOT been completed, but has not been rolled back either (so it may still be committed if desired). STATUS_NO_MORE_ENTRIES 0x8000001A {No More Entries}No more entries are available from an enumeration operation. STATUS_FILEMARK_DETECTED 0x8000001B {Filemark Found}A filemark was detected. STATUS_MEDIA_CHANGED 0x8000001C {Media Changed}The media may have changed. STATUS_BUS_RESET 0x8000001D {I/O Bus Reset}An I/O bus reset was detected. STATUS_END_OF_MEDIA 0x8000001E {End of Media}The end of the media was encountered. STATUS_BEGINNING_OF_MEDIA 0x8000001F Beginning of tape or partition has been detected. STATUS_MEDIA_CHECK 0x80000020 {Media Changed}The media may have changed. STATUS_SETMARK_DETECTED 0x80000021 A tape access reached a setmark. STATUS_NO_DATA_DETECTED 0x80000022 During a tape access, the end of the data written is reached. STATUS_SERVER_HAS_OPEN_HANDLES 0x80000024 The server is in use and cannot be unloaded. STATUS_ALREADY_DISCONNECTED 0x80000025 The specified connection has already been disconnected. STATUS_LONGJUMP 0x80000026 A long jump has been executed. STATUS_PLUGPLAY_QUERY_VETOED 0x80000028 The Plug and Play query operation was not successful. STATUS_UNWIND_CONSOLIDATE 0x80000029 A frame consolidation has been executed. STATUS_REGISTRY_HIVE_RECOVERED 0x8000002A {Registry Hive Recovered}Registry hive (file):

hs

was corrupted and it has been recovered. Some data might have been lost.

STATUS_DLL_MIGHT_BE_INSECURE 0x8000002B The application is attempting to run executable code from the module hs. This may be insecure. An alternative, hs, is available. Should the application use the secure module hs? STATUS_STOPPED_ON_SYMLINK 0x8000002D The create operation stopped after reaching a symbolic link. STATUS_NO_ACE_CONDITION 0x8000002F {No ACE Condition}The specified access control entry (ACE) does not contain a condition. DBG_EXCEPTION_NOT_HANDLED 0x80010001 Debugger did not handle the exception. STATUS_CLUSTER_NODE_ALREADY_UP 0x80130001 The cluster node is already up. STATUS_FLT_BUFFER_TOO_SMALL 0x801C0001 {Buffer too small}The buffer is too small to contain the entry. No information has been written to the buffer. STATUS_FVE_PARTIAL_METADATA 0x80210001 Volume Metadata read or write is incomplete. STATUS_FVE_TRANSIENT_STATE 0x80210002 BitLocker encryption keys were ignored because the volume was in a transient state. STATUS_UNSUCCESSFUL 0xC0000001 {Operation Failed}The requested operation was unsuccessful. STATUS_NOT_IMPLEMENTED 0xC0000002 {Not Implemented}The requested operation is not implemented. STATUS_INVALID_INFO_CLASS 0xC0000003 {Invalid Parameter}The specified information class is not a valid information class for the specified object. STATUS_INFO_LENGTH_MISMATCH 0xC0000004 The specified information record length does not match the length required for the specified information class. STATUS_ACCESS_VIOLATION 0xC0000005 The instruction at 0x STATUS_IN_PAGE_ERROR 0xC0000006 The instruction at 0xp referenced memory at 0xp. The required data was not placed into memory because of an I/O error status of 0xx. STATUS_PAGEFILE_QUOTA 0xC0000007 The pagefile quota for the process has been exhausted. STATUS_INVALID_HANDLE 0xC0000008 An invalid HANDLE was specified. STATUS_BAD_INITIAL_STACK 0xC0000009 An invalid initial stack was specified in a call to NtCreateThread. STATUS_BAD_INITIAL_PC 0xC000000A An invalid initial start address was specified in a call to NtCreateThread. STATUS_INVALID_CID 0xC000000B An invalid Client ID was specified. STATUS_TIMER_NOT_CANCELED 0xC000000C An attempt was made to cancel or set a timer that has an associated APC and the subject thread is not the thread that originally set the timer with an associated APC routine. STATUS_INVALID_PARAMETER 0xC000000D An invalid parameter was passed to a service or function. STATUS_NO_SUCH_DEVICE 0xC000000E A device which does not exist was specified. STATUS_NO_SUCH_FILE 0xC000000F {File Not Found}The file hs does not exist. STATUS_INVALID_DEVICE_REQUEST 0xC0000010 The specified request is not a valid operation for the target device. STATUS_END_OF_FILE 0xC0000011 The end-of-file marker has been reached. There is no valid data in the file beyond this marker. STATUS_WRONG_VOLUME 0xC0000012 {Wrong Volume}The wrong volume is in the drive.

Please insert volume hs into drive hs.

STATUS_NO_MEDIA_IN_DEVICE 0xC0000013 {No Disk}There is no disk in the drive.

Please insert a disk into drive hs.

STATUS_UNRECOGNIZED_MEDIA 0xC0000014 {Unknown Disk Format}The disk in drive hs is not formatted properly.

Please check the disk, and reformat if necessary.

STATUS_NONEXISTENT_SECTOR 0xC0000015 {Sector Not Found}The specified sector does not exist. STATUS_MORE_PROCESSING_REQUIRED 0xC0000016 {Still Busy}The specified I/O request packet (IRP) cannot be disposed of because the I/O operation is not complete. STATUS_NO_MEMORY 0xC0000017 {Not Enough Quota}Not enough virtual memory or paging file quota is available to complete the specified operation. STATUS_CONFLICTING_ADDRESSES 0xC0000018 {Conflicting Address Range}The specified address range conflicts with the address space. STATUS_NOT_MAPPED_VIEW 0xC0000019 Address range to unmap is not a mapped view. STATUS_UNABLE_TO_FREE_VM 0xC000001A Virtual memory cannot be freed. STATUS_UNABLE_TO_DELETE_SECTION 0xC000001B Specified section cannot be deleted. STATUS_INVALID_SYSTEM_SERVICE 0xC000001C An invalid system service was specified in a system service call. STATUS_ILLEGAL_INSTRUCTION 0xC000001D {EXCEPTION}Illegal Instruction

An attempt was made to execute an illegal instruction.

STATUS_INVALID_LOCK_SEQUENCE 0xC000001E {Invalid Lock Sequence}An attempt was made to execute an invalid lock sequence. STATUS_INVALID_VIEW_SIZE 0xC000001F {Invalid Mapping}An attempt was made to create a view for a section which is bigger than the section. STATUS_INVALID_FILE_FOR_SECTION 0xC0000020 {Bad File}The attributes of the specified mapping file for a section of memory cannot be read. STATUS_ALREADY_COMMITTED 0xC0000021 {Already Committed}The specified address range is already committed. STATUS_ACCESS_DENIED 0xC0000022 {Access Denied}A process has requested access to an object, but has not been granted those access rights. STATUS_BUFFER_TOO_SMALL 0xC0000023 {Buffer Too Small}The buffer is too small to contain the entry. No information has been written to the buffer. STATUS_OBJECT_TYPE_MISMATCH 0xC0000024 {Wrong Type}There is a mismatch between the type of object required by the requested operation and the type of object that is specified in the request. STATUS_NONCONTINUABLE_EXCEPTION 0xC0000025 {EXCEPTION}Cannot Continue

Windows cannot continue from this exception.

STATUS_INVALID_DISPOSITION 0xC0000026 An invalid exception disposition was returned by an exception handler. STATUS_UNWIND 0xC0000027 Unwind exception code. STATUS_BAD_STACK 0xC0000028 An invalid or unaligned stack was encountered during an unwind operation. STATUS_INVALID_UNWIND_TARGET 0xC0000029 An invalid unwind target was encountered during an unwind operation. STATUS_NOT_LOCKED 0xC000002A An attempt was made to unlock a page of memory which was not locked. STATUS_PARITY_ERROR 0xC000002B Device parity error on I/O operation. STATUS_UNABLE_TO_DECOMMIT_VM 0xC000002C An attempt was made to decommit uncommitted virtual memory. STATUS_NOT_COMMITTED 0xC000002D An attempt was made to change the attributes on memory that has not been committed. STATUS_INVALID_PORT_ATTRIBUTES 0xC000002E Invalid Object Attributes specified to NtCreatePort or invalid Port Attributes specified to NtConnectPort STATUS_PORT_MESSAGE_TOO_LONG 0xC000002F Length of message passed to NtRequestPort or NtRequestWaitReplyPort was longer than the maximum message allowed by the port. STATUS_INVALID_PARAMETER_MIX 0xC0000030 An invalid combination of parameters was specified. STATUS_INVALID_QUOTA_LOWER 0xC0000031 An attempt was made to lower a quota limit below the current usage. STATUS_DISK_CORRUPT_ERROR 0xC0000032 {Corrupt Disk}The file system structure on the disk is corrupt and unusable.

Please run the Chkdsk utility on the volume hs.

STATUS_OBJECT_NAME_INVALID 0xC0000033 Object Name invalid. STATUS_OBJECT_NAME_NOT_FOUND 0xC0000034 Object Name not found. STATUS_OBJECT_NAME_COLLISION 0xC0000035 Object Name already exists. STATUS_PORT_DISCONNECTED 0xC0000037 Attempt to send a message to a disconnected communication port. STATUS_DEVICE_ALREADY_ATTACHED 0xC0000038 An attempt was made to attach to a device that was already attached to another device. STATUS_OBJECT_PATH_INVALID 0xC0000039 Object Path Component was not a directory object. STATUS_OBJECT_PATH_NOT_FOUND 0xC000003A {Path Not Found}The path hs does not exist. STATUS_OBJECT_PATH_SYNTAX_BAD 0xC000003B Object Path Component was not a directory object. STATUS_DATA_OVERRUN 0xC000003C {Data Overrun}A data overrun error occurred. STATUS_DATA_LATE_ERROR 0xC000003D {Data Late}A data late error occurred. STATUS_DATA_ERROR 0xC000003E {Data Error}An error in reading or writing data occurred. STATUS_CRC_ERROR 0xC000003F {Bad CRC}A cyclic redundancy check (CRC) checksum error occurred. STATUS_SECTION_TOO_BIG 0xC0000040 {Section Too Large}The specified section is too big to map the file. STATUS_PORT_CONNECTION_REFUSED 0xC0000041 The NtConnectPort request is refused. STATUS_INVALID_PORT_HANDLE 0xC0000042 The type of port handle is invalid for the operation requested. STATUS_SHARING_VIOLATION 0xC0000043 A file cannot be opened because the share access flags are incompatible. STATUS_QUOTA_EXCEEDED 0xC0000044 Insufficient quota exists to complete the operation STATUS_INVALID_PAGE_PROTECTION 0xC0000045 The specified page protection was not valid. STATUS_MUTANT_NOT_OWNED 0xC0000046 An attempt to release a mutant object was made by a thread that was not the owner of the mutant object. STATUS_SEMAPHORE_LIMIT_EXCEEDED 0xC0000047 An attempt was made to release a semaphore such that its maximum count would have been exceeded. STATUS_PORT_ALREADY_SET 0xC0000048 An attempt to set a process’s DebugPort or ExceptionPort was made, but a port already exists in the process or an attempt to set a file’s CompletionPort made, but a port was already set in the file or an attempt to set an ALPC port’s associated completion port was made, but it is already set. STATUS_SECTION_NOT_IMAGE 0xC0000049 An attempt was made to query image information on a section which does not map an image. STATUS_SUSPEND_COUNT_EXCEEDED 0xC000004A An attempt was made to suspend a thread whose suspend count was at its maximum. STATUS_THREAD_IS_TERMINATING 0xC000004B An attempt was made to access a thread that has begun termination. STATUS_BAD_WORKING_SET_LIMIT 0xC000004C An attempt was made to set the working set limit to an invalid value (minimum greater than maximum, etc). STATUS_INCOMPATIBLE_FILE_MAP 0xC000004D A section was created to map a file which is not compatible to an already existing section which maps the same file. STATUS_SECTION_PROTECTION 0xC000004E A view to a section specifies a protection which is incompatible with the initial view’s protection. STATUS_EAS_NOT_SUPPORTED 0xC000004F An operation involving EAs failed because the file system does not support EAs. STATUS_EA_TOO_LARGE 0xC0000050 An EA operation failed because EA set is too large. STATUS_NONEXISTENT_EA_ENTRY 0xC0000051 An EA operation failed because the name or EA index is invalid. STATUS_NO_EAS_ON_FILE 0xC0000052 The file for which EAs were requested has no EAs. STATUS_EA_CORRUPT_ERROR 0xC0000053 The EA is corrupt and non-readable. STATUS_FILE_LOCK_CONFLICT 0xC0000054 A requested read/write cannot be granted due to a conflicting file lock. STATUS_LOCK_NOT_GRANTED 0xC0000055 A requested file lock cannot be granted due to other existing locks. STATUS_DELETE_PENDING 0xC0000056 A non close operation has been requested of a file object with a delete pending. STATUS_CTL_FILE_NOT_SUPPORTED 0xC0000057 An attempt was made to set the control attribute on a file. This attribute is not supported in the target file system. STATUS_UNKNOWN_REVISION 0xC0000058 Indicates a revision number encountered or specified is not one known by the service. It may be a more recent revision than the service is aware of. STATUS_REVISION_MISMATCH 0xC0000059 Indicates two revision levels are incompatible. STATUS_INVALID_OWNER 0xC000005A Indicates a particular Security ID may not be assigned as the owner of an object. STATUS_INVALID_PRIMARY_GROUP 0xC000005B Indicates a particular Security ID may not be assigned as the primary group of an object. STATUS_NO_IMPERSONATION_TOKEN 0xC000005C An attempt has been made to operate on an impersonation token by a thread that is not currently impersonating a client. STATUS_CANT_DISABLE_MANDATORY 0xC000005D A mandatory group may not be disabled. STATUS_NO_LOGON_SERVERS 0xC000005E There are currently no logon servers available to service the logon request. STATUS_NO_SUCH_LOGON_SESSION 0xC000005F A specified logon session does not exist. It may already have been terminated. STATUS_NO_SUCH_PRIVILEGE 0xC0000060 A specified privilege does not exist. STATUS_PRIVILEGE_NOT_HELD 0xC0000061 A required privilege is not held by the client. STATUS_INVALID_ACCOUNT_NAME 0xC0000062 The name provided is not a properly formed account name. STATUS_USER_EXISTS 0xC0000063 The specified account already exists. STATUS_NO_SUCH_USER 0xC0000064 The specified account does not exist. STATUS_GROUP_EXISTS 0xC0000065 The specified group already exists. STATUS_NO_SUCH_GROUP 0xC0000066 The specified group does not exist. STATUS_MEMBER_IN_GROUP 0xC0000067 The specified user account is already in the specified group account. Also used to indicate a group cannot be deleted because it contains a member. STATUS_MEMBER_NOT_IN_GROUP 0xC0000068 The specified user account is not a member of the specified group account. STATUS_LAST_ADMIN 0xC0000069 Indicates the requested operation would disable, delete or could prevent logon for an administration account.This is not allowed to prevent creating a situation in which the system cannot be administrated. STATUS_WRONG_PASSWORD 0xC000006A When trying to update a password, this return status indicates that the value provided as the current password is not correct. STATUS_ILL_FORMED_PASSWORD 0xC000006B When trying to update a password, this return status indicates that the value provided for the new password contains values that are not allowed in passwords. STATUS_PASSWORD_RESTRICTION 0xC000006C When trying to update a password, this status indicates that some password update rule has been violated. For example, the password may not meet length criteria. STATUS_LOGON_FAILURE 0xC000006D The attempted logon is invalid. This is either due to a bad username or authentication information. STATUS_ACCOUNT_RESTRICTION 0xC000006E Indicates a referenced user name and authentication information are valid, but some user account restriction has prevented successful authentication (such as time-of-day restrictions). STATUS_INVALID_LOGON_HOURS 0xC000006F The user account has time restrictions and may not be logged onto at this time. STATUS_INVALID_WORKSTATION 0xC0000070 The user account is restricted such that it may not be used to log on from the source workstation. STATUS_PASSWORD_EXPIRED 0xC0000071 The user account’s password has expired. STATUS_ACCOUNT_DISABLED 0xC0000072 The referenced account is currently disabled and may not be logged on to. STATUS_NONE_MAPPED 0xC0000073 None of the information to be translated has been translated. STATUS_TOO_MANY_LUIDS_REQUESTED 0xC0000074 The number of LUIDs requested may not be allocated with a single allocation. STATUS_LUIDS_EXHAUSTED 0xC0000075 Indicates there are no more LUIDs to allocate. STATUS_INVALID_SUB_AUTHORITY 0xC0000076 Indicates the sub-authority value is invalid for the particular use. STATUS_INVALID_ACL 0xC0000077 Indicates the ACL structure is not valid. STATUS_INVALID_SID 0xC0000078 Indicates the SID structure is not valid. STATUS_INVALID_SECURITY_DESCR 0xC0000079 Indicates the SECURITY_DESCRIPTOR structure is not valid. STATUS_PROCEDURE_NOT_FOUND 0xC000007A Indicates the specified procedure address cannot be found in the DLL. STATUS_INVALID_IMAGE_FORMAT 0xC000007B {Bad Image}hs is either not designed to run on Windows or it contains an error. Try installing the program again using the original installation media or contact your system administrator or the software vendor for support. Error status 0x STATUS_NO_TOKEN 0xC000007C An attempt was made to reference a token that doesn’t exist.This is typically done by referencing the token associated with a thread when the thread is not impersonating a client. STATUS_BAD_INHERITANCE_ACL 0xC000007D Indicates that an attempt to build either an inherited ACL or ACE was not successful.This can be caused by a number of things. One of the more probable causes is the replacement of a CreatorId with an SID that didn’t fit into the ACE or ACL. STATUS_RANGE_NOT_LOCKED 0xC000007E The range specified in NtUnlockFile was not locked. STATUS_DISK_FULL 0xC000007F An operation failed because the disk was full. STATUS_SERVER_DISABLED 0xC0000080 The GUID allocation server is [already] disabled at the moment. STATUS_SERVER_NOT_DISABLED 0xC0000081 The GUID allocation server is [already] enabled at the moment. STATUS_TOO_MANY_GUIDS_REQUESTED 0xC0000082 Too many GUIDs were requested from the allocation server at once. STATUS_GUIDS_EXHAUSTED 0xC0000083 The GUIDs could not be allocated because the Authority Agent was exhausted. STATUS_INVALID_ID_AUTHORITY 0xC0000084 The value provided was an invalid value for an identifier authority. STATUS_AGENTS_EXHAUSTED 0xC0000085 There are no more authority agent values available for the given identifier authority value. STATUS_INVALID_VOLUME_LABEL 0xC0000086 An invalid volume label has been specified. STATUS_SECTION_NOT_EXTENDED 0xC0000087 A mapped section could not be extended. STATUS_NOT_MAPPED_DATA 0xC0000088 Specified section to flush does not map a data file. STATUS_RESOURCE_DATA_NOT_FOUND 0xC0000089 Indicates the specified image file did not contain a resource section. STATUS_RESOURCE_TYPE_NOT_FOUND 0xC000008A Indicates the specified resource type cannot be found in the image file. STATUS_RESOURCE_NAME_NOT_FOUND 0xC000008B Indicates the specified resource name cannot be found in the image file. STATUS_ARRAY_BOUNDS_EXCEEDED 0xC000008C {EXCEPTION}Array bounds exceeded. STATUS_FLOAT_DENORMAL_OPERAND 0xC000008D {EXCEPTION}Floating-point denormal operand. STATUS_FLOAT_DIVIDE_BY_ZERO 0xC000008E {EXCEPTION}Floating-point division by zero. STATUS_FLOAT_INEXACT_RESULT 0xC000008F {EXCEPTION}Floating-point inexact result. STATUS_FLOAT_INVALID_OPERATION 0xC0000090 {EXCEPTION}Floating-point invalid operation. STATUS_FLOAT_OVERFLOW 0xC0000091 {EXCEPTION}Floating-point overflow. STATUS_FLOAT_STACK_CHECK 0xC0000092 {EXCEPTION}Floating-point stack check. STATUS_FLOAT_UNDERFLOW 0xC0000093 {EXCEPTION}Floating-point underflow. STATUS_INTEGER_DIVIDE_BY_ZERO 0xC0000094 {EXCEPTION}Integer division by zero. STATUS_INTEGER_OVERFLOW 0xC0000095 {EXCEPTION}Integer overflow. STATUS_PRIVILEGED_INSTRUCTION 0xC0000096 {EXCEPTION}Privileged instruction. STATUS_TOO_MANY_PAGING_FILES 0xC0000097 An attempt was made to install more paging files than the system supports. STATUS_FILE_INVALID 0xC0000098 The volume for a file has been externally altered such that the opened file is no longer valid. STATUS_ALLOTTED_SPACE_EXCEEDED 0xC0000099 When a block of memory is allotted for future updates, such as the memory allocated to hold discretionary access control and primary group information, successive updates may exceed the amount of memory originally allotted.Since quota may already have been charged to several processes which have handles to the object, it is not reasonable to alter the size of the allocated memory.

Instead, a request that requires more memory than has been allotted must fail and the STATUS_ALLOTED_SPACE_EXCEEDED error returned.

STATUS_INSUFFICIENT_RESOURCES 0xC000009A Insufficient system resources exist to complete the API. STATUS_DFS_EXIT_PATH_FOUND 0xC000009B An attempt has been made to open a DFS exit path control file. STATUS_DEVICE_DATA_ERROR 0xC000009C STATUS_DEVICE_DATA_ERROR STATUS_DEVICE_NOT_CONNECTED 0xC000009D STATUS_DEVICE_NOT_CONNECTED STATUS_DEVICE_POWER_FAILURE 0xC000009E STATUS_DEVICE_POWER_FAILURE STATUS_FREE_VM_NOT_AT_BASE 0xC000009F Virtual memory cannot be freed as base address is not the base of the region and a region size of zero was specified. STATUS_MEMORY_NOT_ALLOCATED 0xC00000A0 An attempt was made to free virtual memory which is not allocated. STATUS_WORKING_SET_QUOTA 0xC00000A1 The working set is not big enough to allow the requested pages to be locked. STATUS_MEDIA_WRITE_PROTECTED 0xC00000A2 {Write Protect Error}The disk cannot be written to because it is write protected. Please remove the write protection from the volume hs in drive hs. STATUS_DEVICE_NOT_READY 0xC00000A3 {Drive Not Ready}The drive is not ready for use; its door may be open. Please check drive hs and make sure that a disk is inserted and that the drive door is closed. STATUS_INVALID_GROUP_ATTRIBUTES 0xC00000A4 The specified attributes are invalid, or incompatible with the attributes for the group as a whole. STATUS_BAD_IMPERSONATION_LEVEL 0xC00000A5 A specified impersonation level is invalid.Also used to indicate a required impersonation level was not provided. STATUS_CANT_OPEN_ANONYMOUS 0xC00000A6 An attempt was made to open an Anonymous level token.Anonymous tokens may not be opened. STATUS_BAD_VALIDATION_CLASS 0xC00000A7 The validation information class requested was invalid. STATUS_BAD_TOKEN_TYPE 0xC00000A8 The type of a token object is inappropriate for its attempted use. STATUS_BAD_MASTER_BOOT_RECORD 0xC00000A9 The type of a token object is inappropriate for its attempted use. STATUS_INSTRUCTION_MISALIGNMENT 0xC00000AA An attempt was made to execute an instruction at an unaligned address and the host system does not support unaligned instruction references. STATUS_INSTANCE_NOT_AVAILABLE 0xC00000AB The maximum named pipe instance count has been reached. STATUS_PIPE_NOT_AVAILABLE 0xC00000AC An instance of a named pipe cannot be found in the listening state. STATUS_INVALID_PIPE_STATE 0xC00000AD The named pipe is not in the connected or closing state. STATUS_PIPE_BUSY 0xC00000AE The specified pipe is set to complete operations and there are current I/O operations queued so it cannot be changed to queue operations. STATUS_ILLEGAL_FUNCTION 0xC00000AF The specified handle is not open to the server end of the named pipe. STATUS_PIPE_DISCONNECTED 0xC00000B0 The specified named pipe is in the disconnected state. STATUS_PIPE_CLOSING 0xC00000B1 The specified named pipe is in the closing state. STATUS_PIPE_CONNECTED 0xC00000B2 The specified named pipe is in the connected state. STATUS_PIPE_LISTENING 0xC00000B3 The specified named pipe is in the listening state. STATUS_INVALID_READ_MODE 0xC00000B4 The specified named pipe is not in message mode. STATUS_IO_TIMEOUT 0xC00000B5 {Device Timeout}The specified I/O operation on hs was not completed before the time-out period expired. STATUS_FILE_FORCED_CLOSED 0xC00000B6 The specified file has been closed by another process. STATUS_PROFILING_NOT_STARTED 0xC00000B7 Profiling not started. STATUS_PROFILING_NOT_STOPPED 0xC00000B8 Profiling not stopped. STATUS_COULD_NOT_INTERPRET 0xC00000B9 The passed ACL did not contain the minimum required information. STATUS_FILE_IS_A_DIRECTORY 0xC00000BA The file that was specified as a target is a directory and the caller specified that it could be anything but a directory. STATUS_NOT_SUPPORTED 0xC00000BB The request is not supported. STATUS_REMOTE_NOT_LISTENING 0xC00000BC This remote computer is not listening. STATUS_DUPLICATE_NAME 0xC00000BD A duplicate name exists on the network. STATUS_BAD_NETWORK_PATH 0xC00000BE The network path cannot be located. STATUS_NETWORK_BUSY 0xC00000BF The network is busy. STATUS_DEVICE_DOES_NOT_EXIST 0xC00000C0 This device does not exist. STATUS_TOO_MANY_COMMANDS 0xC00000C1 The network BIOS command limit has been reached. STATUS_ADAPTER_HARDWARE_ERROR 0xC00000C2 An I/O adapter hardware error has occurred. STATUS_INVALID_NETWORK_RESPONSE 0xC00000C3 The network responded incorrectly. STATUS_UNEXPECTED_NETWORK_ERROR 0xC00000C4 An unexpected network error occurred. STATUS_BAD_REMOTE_ADAPTER 0xC00000C5 The remote adapter is not compatible. STATUS_PRINT_QUEUE_FULL 0xC00000C6 The printer queue is full. STATUS_NO_SPOOL_SPACE 0xC00000C7 Space to store the file waiting to be printed is not available on the server. STATUS_PRINT_CANCELLED 0xC00000C8 The requested print file has been canceled. STATUS_NETWORK_NAME_DELETED 0xC00000C9 The network name was deleted. STATUS_NETWORK_ACCESS_DENIED 0xC00000CA Network access is denied. STATUS_BAD_DEVICE_TYPE 0xC00000CB {Incorrect Network Resource Type}The specified device type (LPT, for example) conflicts with the actual device type on the remote resource. STATUS_BAD_NETWORK_NAME 0xC00000CC {Network Name Not Found}The specified share name cannot be found on the remote server. STATUS_TOO_MANY_NAMES 0xC00000CD The name limit for the local computer network adapter card was exceeded. STATUS_TOO_MANY_SESSIONS 0xC00000CE The network BIOS session limit was exceeded. STATUS_SHARING_PAUSED 0xC00000CF File sharing has been temporarily paused. STATUS_REQUEST_NOT_ACCEPTED 0xC00000D0 No more connections can be made to this remote computer at this time because there are already as many connections as the computer can accept. STATUS_REDIRECTOR_PAUSED 0xC00000D1 Print or disk redirection is temporarily paused. STATUS_NET_WRITE_FAULT 0xC00000D2 A network data fault occurred. STATUS_PROFILING_AT_LIMIT 0xC00000D3 The number of active profiling objects is at the maximum and no more may be started. STATUS_NOT_SAME_DEVICE 0xC00000D4 {Incorrect Volume}The target file of a rename request is located on a different device than the source of the rename request. STATUS_FILE_RENAMED 0xC00000D5 The file specified has been renamed and thus cannot be modified. STATUS_VIRTUAL_CIRCUIT_CLOSED 0xC00000D6 {Network Request Timeout}The session with a remote server has been disconnected because the time-out interval for a request has expired. STATUS_NO_SECURITY_ON_OBJECT 0xC00000D7 Indicates an attempt was made to operate on the security of an object that does not have security associated with it. STATUS_CANT_WAIT 0xC00000D8 Used to indicate that an operation cannot continue without blocking for I/O. STATUS_PIPE_EMPTY 0xC00000D9 Used to indicate that a read operation was done on an empty pipe. STATUS_CANT_ACCESS_DOMAIN_INFO 0xC00000DA Configuration information could not be read from the domain controller, either because the machine is unavailable, or access has been denied. STATUS_CANT_TERMINATE_SELF 0xC00000DB Indicates that a thread attempted to terminate itself by default (called NtTerminateThread with NULL) and it was the last thread in the current process. STATUS_INVALID_SERVER_STATE 0xC00000DC Indicates the Sam Server was in the wrong state to perform the desired operation. STATUS_INVALID_DOMAIN_STATE 0xC00000DD Indicates the Domain was in the wrong state to perform the desired operation. STATUS_INVALID_DOMAIN_ROLE 0xC00000DE This operation is only allowed for the Primary Domain Controller of the domain. STATUS_NO_SUCH_DOMAIN 0xC00000DF The specified Domain did not exist. STATUS_DOMAIN_EXISTS 0xC00000E0 The specified Domain already exists. STATUS_DOMAIN_LIMIT_EXCEEDED 0xC00000E1 An attempt was made to exceed the limit on the number of domains per server for this release. STATUS_OPLOCK_NOT_GRANTED 0xC00000E2 Error status returned when oplock request is denied. STATUS_INVALID_OPLOCK_PROTOCOL 0xC00000E3 Error status returned when an invalid oplock acknowledgment is received by a file system. STATUS_INTERNAL_DB_CORRUPTION 0xC00000E4 This error indicates that the requested operation cannot be completed due to a catastrophic media failure or on-disk data structure corruption. STATUS_INTERNAL_ERROR 0xC00000E5 An internal error occurred. STATUS_GENERIC_NOT_MAPPED 0xC00000E6 Indicates generic access types were contained in an access mask which should already be mapped to non-generic access types. STATUS_BAD_DESCRIPTOR_FORMAT 0xC00000E7 Indicates a security descriptor is not in the necessary format (absolute or self-relative). STATUS_INVALID_USER_BUFFER 0xC00000E8 An access to a user buffer failed at an “expected” point in time. This code is defined since the caller does not want to accept STATUS_ACCESS_VIOLATION in its filter. STATUS_UNEXPECTED_IO_ERROR 0xC00000E9 If an I/O error is returned which is not defined in the standard FsRtl filter, it is converted to the following error which is guaranteed to be in the filter. In this case information is lost, however, the filter correctly handles the exception. STATUS_UNEXPECTED_MM_CREATE_ERR 0xC00000EA If an MM error is returned which is not defined in the standard FsRtl filter, it is converted to one of the following errors which is guaranteed to be in the filter. In this case information is lost, however, the filter correctly handles the exception. STATUS_UNEXPECTED_MM_MAP_ERROR 0xC00000EB If an MM error is returned which is not defined in the standard FsRtl filter, it is converted to one of the following errors which is guaranteed to be in the filter. In this case information is lost, however, the filter correctly handles the exception. STATUS_UNEXPECTED_MM_EXTEND_ERR 0xC00000EC If an MM error is returned which is not defined in the standard FsRtl filter, it is converted to one of the following errors which is guaranteed to be in the filter. In this case information is lost, however, the filter correctly handles the exception. STATUS_NOT_LOGON_PROCESS 0xC00000ED The requested action is restricted for use by logon processes only. The calling process has not registered as a logon process. STATUS_LOGON_SESSION_EXISTS 0xC00000EE An attempt has been made to start a new session manager or LSA logon session with an ID that is already in use. STATUS_INVALID_PARAMETER_1 0xC00000EF An invalid parameter was passed to a service or function as the first argument. STATUS_INVALID_PARAMETER_2 0xC00000F0 An invalid parameter was passed to a service or function as the second argument. STATUS_INVALID_PARAMETER_3 0xC00000F1 An invalid parameter was passed to a service or function as the third argument. STATUS_INVALID_PARAMETER_4 0xC00000F2 An invalid parameter was passed to a service or function as the fourth argument. STATUS_INVALID_PARAMETER_5 0xC00000F3 An invalid parameter was passed to a service or function as the fifth argument. STATUS_INVALID_PARAMETER_6 0xC00000F4 An invalid parameter was passed to a service or function as the sixth argument. STATUS_INVALID_PARAMETER_7 0xC00000F5 An invalid parameter was passed to a service or function as the seventh argument. STATUS_INVALID_PARAMETER_8 0xC00000F6 An invalid parameter was passed to a service or function as the eighth argument. STATUS_INVALID_PARAMETER_9 0xC00000F7 An invalid parameter was passed to a service or function as the ninth argument. STATUS_INVALID_PARAMETER_10 0xC00000F8 An invalid parameter was passed to a service or function as the tenth argument. STATUS_INVALID_PARAMETER_11 0xC00000F9 An invalid parameter was passed to a service or function as the eleventh argument. STATUS_INVALID_PARAMETER_12 0xC00000FA An invalid parameter was passed to a service or function as the twelfth argument. STATUS_REDIRECTOR_NOT_STARTED 0xC00000FB An attempt was made to access a network file, but the network software was not yet started. STATUS_REDIRECTOR_STARTED 0xC00000FC An attempt was made to start the redirector, but the redirector has already been started. STATUS_STACK_OVERFLOW 0xC00000FD A new guard page for the stack cannot be created. STATUS_NO_SUCH_PACKAGE 0xC00000FE A specified authentication package is unknown. STATUS_BAD_FUNCTION_TABLE 0xC00000FF A malformed function table was encountered during an unwind operation. STATUS_VARIABLE_NOT_FOUND 0xC0000100 Indicates the specified environment variable name was not found in the specified environment block. STATUS_DIRECTORY_NOT_EMPTY 0xC0000101 Indicates that the directory trying to be deleted is not empty. STATUS_FILE_CORRUPT_ERROR 0xC0000102 {Corrupt File}The file or directory hs is corrupt and unreadable.

Please run the Chkdsk utility.

STATUS_NOT_A_DIRECTORY 0xC0000103 A requested opened file is not a directory. STATUS_BAD_LOGON_SESSION_STATE 0xC0000104 The logon session is not in a state that is consistent with the requested operation. STATUS_LOGON_SESSION_COLLISION 0xC0000105 An internal LSA error has occurred. An authentication package has requested the creation of a Logon Session but the ID of an already existing Logon Session has been specified. STATUS_NAME_TOO_LONG 0xC0000106 A specified name string is too long for its intended use. STATUS_FILES_OPEN 0xC0000107 The user attempted to force close the files on a redirected drive, but there were opened files on the drive, and the user did not specify a sufficient level of force. STATUS_CONNECTION_IN_USE 0xC0000108 The user attempted to force close the files on a redirected drive, but there were opened directories on the drive, and the user did not specify a sufficient level of force. STATUS_MESSAGE_NOT_FOUND 0xC0000109 RtlFindMessage could not locate the requested message ID in the message table resource. STATUS_PROCESS_IS_TERMINATING 0xC000010A An attempt was made to access an exiting process. STATUS_INVALID_LOGON_TYPE 0xC000010B Indicates an invalid value has been provided for the LogonType requested. STATUS_NO_GUID_TRANSLATION 0xC000010C Indicates that an attempt was made to assign protection to a file system file or directory and one of the SIDs in the security descriptor could not be translated into a GUID that could be stored by the file system.This causes the protection attempt to fail, which may cause a file creation attempt to fail. STATUS_CANNOT_IMPERSONATE 0xC000010D Indicates that an attempt has been made to impersonate via a named pipe that has not yet been read from. STATUS_IMAGE_ALREADY_LOADED 0xC000010E Indicates that the specified image is already loaded. STATUS_ABIOS_NOT_PRESENT 0xC000010F STATUS_ABIOS_NOT_PRESENT STATUS_ABIOS_LID_NOT_EXIST 0xC0000110 STATUS_ABIOS_LID_NOT_EXIST STATUS_ABIOS_LID_ALREADY_OWNED 0xC0000111 STATUS_ABIOS_LID_ALREADY_OWNED STATUS_ABIOS_NOT_LID_OWNER 0xC0000112 STATUS_ABIOS_NOT_LID_OWNER STATUS_ABIOS_INVALID_COMMAND 0xC0000113 STATUS_ABIOS_INVALID_COMMAND STATUS_ABIOS_INVALID_LID 0xC0000114 STATUS_ABIOS_INVALID_LID STATUS_ABIOS_INVALID_SELECTOR 0xC0000116 STATUS_ABIOS_INVALID_SELECTOR STATUS_NO_LDT 0xC0000117 Indicates that an attempt was made to change the size of the LDT for a process that has no LDT. STATUS_INVALID_LDT_SIZE 0xC0000118 Indicates that an attempt was made to grow an LDT by setting its size, or that the size was not an even number of selectors. STATUS_INVALID_LDT_OFFSET 0xC0000119 Indicates that the starting value for the LDT information was not an integral multiple of the selector size. STATUS_INVALID_LDT_DESCRIPTOR 0xC000011A Indicates that the user supplied an invalid descriptor when trying to set up Ldt descriptors. STATUS_INVALID_IMAGE_NE_FORMAT 0xC000011B The specified image file did not have the correct format. It appears to be NE format. STATUS_RXACT_INVALID_STATE 0xC000011C Indicates that the transaction state of a registry sub-tree is incompatible with the requested operation. For example, a request has been made to start a new transaction with one already in progress, or a request has been made to apply a transaction when one is not currently in progress. STATUS_RXACT_COMMIT_FAILURE 0xC000011D Indicates an error has occurred during a registry transaction commit. The database has been left in an unknown, but probably inconsistent, state. The state of the registry transaction is left as COMMITTING. STATUS_MAPPED_FILE_SIZE_ZERO 0xC000011E An attempt was made to map a file of size zero with the maximum size specified as zero. STATUS_TOO_MANY_OPENED_FILES 0xC000011F Too many files are opened on a remote server.This error should only be returned by the Windows redirector on a remote drive. STATUS_CANCELLED 0xC0000120 The I/O request was canceled. STATUS_CANNOT_DELETE 0xC0000121 An attempt has been made to remove a file or directory that cannot be deleted. STATUS_INVALID_COMPUTER_NAME 0xC0000122 Indicates a name specified as a remote computer name is syntactically invalid. STATUS_FILE_DELETED 0xC0000123 An I/O request other than close was performed on a file after it has been deleted, which can only happen to a request which did not complete before the last handle was closed via NtClose. STATUS_SPECIAL_ACCOUNT 0xC0000124 Indicates an operation has been attempted on a built-in (special) SAM account which is incompatible with built-in accounts. For example, built-in accounts cannot be deleted. STATUS_SPECIAL_GROUP 0xC0000125 The operation requested may not be performed on the specified group because it is a built-in special group. STATUS_SPECIAL_USER 0xC0000126 The operation requested may not be performed on the specified user because it is a built-in special user. STATUS_MEMBERS_PRIMARY_GROUP 0xC0000127 Indicates a member cannot be removed from a group because the group is currently the member’s primary group. STATUS_FILE_CLOSED 0xC0000128 An I/O request other than close and several other special case operations was attempted using a file object that had already been closed. STATUS_TOO_MANY_THREADS 0xC0000129 Indicates a process has too many threads to perform the requested action. For example, assignment of a primary token may only be performed when a process has zero or one threads. STATUS_THREAD_NOT_IN_PROCESS 0xC000012A An attempt was made to operate on a thread within a specific process, but the thread specified is not in the process specified. STATUS_TOKEN_ALREADY_IN_USE 0xC000012B An attempt was made to establish a token for use as a primary token but the token is already in use. A token can only be the primary token of one process at a time. STATUS_PAGEFILE_QUOTA_EXCEEDED 0xC000012C Page file quota was exceeded. STATUS_COMMITMENT_LIMIT 0xC000012D {Out of Virtual Memory}Your system is low on virtual memory. To ensure that Windows runs properly, increase the size of your virtual memory paging file. For more information, see Help. STATUS_INVALID_IMAGE_LE_FORMAT 0xC000012E The specified image file did not have the correct format, it appears to be LE format. STATUS_INVALID_IMAGE_NOT_MZ 0xC000012F The specified image file did not have the correct format, it did not have an initial MZ. STATUS_INVALID_IMAGE_PROTECT 0xC0000130 The specified image file did not have the correct format, it did not have a proper e_lfarlc in the MZ header. STATUS_INVALID_IMAGE_WIN_16 0xC0000131 The specified image file did not have the correct format, it appears to be a 16-bit Windows image. STATUS_LOGON_SERVER_CONFLICT 0xC0000132 The Netlogon service cannot start because another Netlogon service running in the domain conflicts with the specified role. STATUS_TIME_DIFFERENCE_AT_DC 0xC0000133 The time at the Primary Domain Controller is different than the time at the Backup Domain Controller or member server by too large an amount. STATUS_SYNCHRONIZATION_REQUIRED 0xC0000134 The SAM database on a Windows Server is significantly out of synchronization with the copy on the Domain Controller. A complete synchronization is required. STATUS_DLL_NOT_FOUND 0xC0000135 The program can’t start because hs is missing from your computer. Try reinstalling the program to fix this problem. STATUS_OPEN_FAILED 0xC0000136 The NtCreateFile API failed. This error should never be returned to an application, it is a place holder for the Windows Lan Manager Redirector to use in its internal error mapping routines. STATUS_IO_PRIVILEGE_FAILED 0xC0000137 {Privilege Failed}The I/O permissions for the process could not be changed. STATUS_ORDINAL_NOT_FOUND 0xC0000138 {Ordinal Not Found}The ordinal ld could not be located in the dynamic link library hs. STATUS_ENTRYPOINT_NOT_FOUND 0xC0000139 {Entry Point Not Found}The procedure entry point hs could not be located in the dynamic link library hs. STATUS_CONTROL_C_EXIT 0xC000013A {Application Exit by CTRL+C}The application terminated as a result of a CTRL+C. STATUS_LOCAL_DISCONNECT 0xC000013B {Virtual Circuit Closed}The network transport on your computer has closed a network connection. There may or may not be I/O requests outstanding. STATUS_REMOTE_DISCONNECT 0xC000013C {Virtual Circuit Closed}The network transport on a remote computer has closed a network connection. There may or may not be I/O requests outstanding. STATUS_REMOTE_RESOURCES 0xC000013D {Insufficient Resources on Remote Computer}The remote computer has insufficient resources to complete the network request. For instance, there may not be enough memory available on the remote computer to carry out the request at this time. STATUS_LINK_FAILED 0xC000013E {Virtual Circuit Closed}An existing connection (virtual circuit) has been broken at the remote computer. There is probably something wrong with the network software protocol or the network hardware on the remote computer. STATUS_LINK_TIMEOUT 0xC000013F {Virtual Circuit Closed}The network transport on your computer has closed a network connection because it had to wait too long for a response from the remote computer. STATUS_INVALID_CONNECTION 0xC0000140 The connection handle given to the transport was invalid. STATUS_INVALID_ADDRESS 0xC0000141 The address handle given to the transport was invalid. STATUS_DLL_INIT_FAILED 0xC0000142 {DLL Initialization Failed}Initialization of the dynamic link library hs failed. The process is terminating abnormally. STATUS_MISSING_SYSTEMFILE 0xC0000143 {Missing System File}The required system file hs is bad or missing. STATUS_UNHANDLED_EXCEPTION 0xC0000144 {Application Error}The exception s (0x STATUS_APP_INIT_FAILURE 0xC0000145 {Application Error}The application was unable to start correctly (0xlx). Click OK to close the application. STATUS_PAGEFILE_CREATE_FAILED 0xC0000146 {Unable to Create Paging File}The creation of the paging file hs failed (lx). The requested size was ld. STATUS_NO_PAGEFILE 0xC0000147 {No Paging File Specified}No paging file was specified in the system configuration. STATUS_INVALID_LEVEL 0xC0000148 {Incorrect System Call Level}An invalid level was passed into the specified system call. STATUS_WRONG_PASSWORD_CORE 0xC0000149 {Incorrect Password to LAN Manager Server}You specified an incorrect password to a LAN Manager 2.x or MS-NET server. STATUS_ILLEGAL_FLOAT_CONTEXT 0xC000014A {EXCEPTION}A real-mode application issued a floating-point instruction and floating-point hardware is not present. STATUS_PIPE_BROKEN 0xC000014B The pipe operation has failed because the other end of the pipe has been closed. STATUS_REGISTRY_CORRUPT 0xC000014C {The Registry Is Corrupt}The structure of one of the files that contains Registry data is corrupt, or the image of the file in memory is corrupt, or the file could not be recovered because the alternate copy or log was absent or corrupt. STATUS_REGISTRY_IO_FAILED 0xC000014D An I/O operation initiated by the Registry failed unrecoverably. The Registry could not read in, or write out, or flush, one of the files that contain the system’s image of the Registry. STATUS_NO_EVENT_PAIR 0xC000014E An event pair synchronization operation was performed using the thread specific client/server event pair object, but no event pair object was associated with the thread. STATUS_UNRECOGNIZED_VOLUME 0xC000014F The volume does not contain a recognized file system. Please make sure that all required file system drivers are loaded and that the volume is not corrupt. STATUS_SERIAL_NO_DEVICE_INITED 0xC0000150 No serial device was successfully initialized. The serial driver will unload. STATUS_NO_SUCH_ALIAS 0xC0000151 The specified local group does not exist. STATUS_MEMBER_NOT_IN_ALIAS 0xC0000152 The specified account name is not a member of the group. STATUS_MEMBER_IN_ALIAS 0xC0000153 The specified account name is already a member of the group. STATUS_ALIAS_EXISTS 0xC0000154 The specified local group already exists. STATUS_LOGON_NOT_GRANTED 0xC0000155 A requested type of logon (e.g., Interactive, Network, Service) is not granted by the target system’s local security policy.Please ask the system administrator to grant the necessary form of logon. STATUS_TOO_MANY_SECRETS 0xC0000156 The maximum number of secrets that may be stored in a single system has been exceeded. The length and number of secrets is limited to satisfy United States State Department export restrictions. STATUS_SECRET_TOO_LONG 0xC0000157 The length of a secret exceeds the maximum length allowed. The length and number of secrets is limited to satisfy United States State Department export restrictions. STATUS_INTERNAL_DB_ERROR 0xC0000158 The Local Security Authority (LSA) database contains an internal inconsistency. STATUS_FULLSCREEN_MODE 0xC0000159 The requested operation cannot be performed in fullscreen mode. STATUS_TOO_MANY_CONTEXT_IDS 0xC000015A During a logon attempt, the user’s security context accumulated too many security IDs. This is a very unusual situation. Remove the user from some global or local groups to reduce the number of security ids to incorporate into the security context. STATUS_LOGON_TYPE_NOT_GRANTED 0xC000015B A user has requested a type of logon (e.g., interactive or network) that has not been granted. An administrator has control over who may logon interactively and through the network. STATUS_NOT_REGISTRY_FILE 0xC000015C The system has attempted to load or restore a file into the registry, and the specified file is not in the format of a registry file. STATUS_FT_MISSING_MEMBER 0xC000015F An attempt was made to explicitly access the secondary copy of information via a device control to the Fault Tolerance driver and the secondary copy is not present in the system. STATUS_ILL_FORMED_SERVICE_ENTRY 0xC0000160 A configuration registry node representing a driver service entry was ill-formed and did not contain required value entries. STATUS_ILLEGAL_CHARACTER 0xC0000161 An illegal character was encountered. For a multi-byte character set this includes a lead byte without a succeeding trail byte. For the Unicode character set this includes the characters 0xFFFF and 0xFFFE. STATUS_UNMAPPABLE_CHARACTER 0xC0000162 No mapping for the Unicode character exists in the target multi-byte code page. STATUS_UNDEFINED_CHARACTER 0xC0000163 The Unicode character is not defined in the Unicode character set installed on the system. STATUS_FLOPPY_VOLUME 0xC0000164 The paging file cannot be created on a floppy diskette. STATUS_FLOPPY_ID_MARK_NOT_FOUND 0xC0000165 {Floppy Disk Error}While accessing a floppy disk, an ID address mark was not found. STATUS_FLOPPY_WRONG_CYLINDER 0xC0000166 {Floppy Disk Error}While accessing a floppy disk, the track address from the sector ID field was found to be different than the track address maintained by the controller. STATUS_FLOPPY_UNKNOWN_ERROR 0xC0000167 {Floppy Disk Error}The floppy disk controller reported an error that is not recognized by the floppy disk driver. STATUS_FLOPPY_BAD_REGISTERS 0xC0000168 {Floppy Disk Error}While accessing a floppy-disk, the controller returned inconsistent results via its registers. STATUS_DISK_RECALIBRATE_FAILED 0xC0000169 {Hard Disk Error}While accessing the hard disk, a recalibrate operation failed, even after retries. STATUS_DISK_OPERATION_FAILED 0xC000016A {Hard Disk Error}While accessing the hard disk, a disk operation failed even after retries. STATUS_DISK_RESET_FAILED 0xC000016B {Hard Disk Error}While accessing the hard disk, a disk controller reset was needed, but even that failed. STATUS_SHARED_IRQ_BUSY 0xC000016C An attempt was made to open a device that was sharing an IRQ with other devices.At least one other device that uses that IRQ was already opened.

Two concurrent opens of devices that share an IRQ and only work via interrupts is not supported for the particular bus type that the devices use.

STATUS_FT_ORPHANING 0xC000016D {FT Orphaning}A disk that is part of a fault-tolerant volume can no longer be accessed. STATUS_PARTITION_FAILURE 0xC0000172 Tape could not be partitioned. STATUS_INVALID_BLOCK_LENGTH 0xC0000173 When accessing a new tape of a multivolume partition, the current blocksize is incorrect. STATUS_DEVICE_NOT_PARTITIONED 0xC0000174 Tape partition information could not be found when loading a tape. STATUS_UNABLE_TO_LOCK_MEDIA 0xC0000175 Attempt to lock the eject media mechanism fails. STATUS_UNABLE_TO_UNLOAD_MEDIA 0xC0000176 Unload media fails. STATUS_EOM_OVERFLOW 0xC0000177 Physical end of tape was detected. STATUS_NO_MEDIA 0xC0000178 {No Media}There is no media in the drive. Please insert media into drive hs. STATUS_NO_SUCH_MEMBER 0xC000017A A member could not be added to or removed from the local group because the member does not exist. STATUS_INVALID_MEMBER 0xC000017B A new member could not be added to a local group because the member has the wrong account type. STATUS_KEY_DELETED 0xC000017C Illegal operation attempted on a registry key which has been marked for deletion. STATUS_NO_LOG_SPACE 0xC000017D System could not allocate required space in a registry log. STATUS_TOO_MANY_SIDS 0xC000017E Too many Sids have been specified. STATUS_KEY_HAS_CHILDREN 0xC0000180 An attempt was made to create a symbolic link in a registry key that already has subkeys or values. STATUS_CHILD_MUST_BE_VOLATILE 0xC0000181 An attempt was made to create a Stable subkey under a Volatile parent key. STATUS_DRIVER_INTERNAL_ERROR 0xC0000183 An error was detected between two drivers or within an I/O driver. STATUS_INVALID_DEVICE_STATE 0xC0000184 The device is not in a valid state to perform this request. STATUS_IO_DEVICE_ERROR 0xC0000185 The I/O device reported an I/O error. STATUS_DEVICE_PROTOCOL_ERROR 0xC0000186 A protocol error was detected between the driver and the device. STATUS_BACKUP_CONTROLLER 0xC0000187 This operation is only allowed for the Primary Domain Controller of the domain. STATUS_LOG_FILE_FULL 0xC0000188 Log file space is insufficient to support this operation. STATUS_TOO_LATE 0xC0000189 A write operation was attempted to a volume after it was dismounted. STATUS_NO_TRUST_LSA_SECRET 0xC000018A The workstation does not have a trust secret for the primary domain in the local LSA database. STATUS_NO_TRUST_SAM_ACCOUNT 0xC000018B The SAM database on the Windows Server does not have a computer account for this workstation trust relationship. STATUS_TRUSTED_DOMAIN_FAILURE 0xC000018C The logon request failed because the trust relationship between the primary domain and the trusted domain failed. STATUS_EVENTLOG_FILE_CORRUPT 0xC000018E The Eventlog log file is corrupt. STATUS_EVENTLOG_CANT_START 0xC000018F No Eventlog log file could be opened. The Eventlog service did not start. STATUS_TRUST_FAILURE 0xC0000190 The network logon failed. This may be because the validation authority can’t be reached. STATUS_MUTANT_LIMIT_EXCEEDED 0xC0000191 An attempt was made to acquire a mutant such that its maximum count would have been exceeded. STATUS_NETLOGON_NOT_STARTED 0xC0000192 An attempt was made to logon, but the netlogon service was not started. STATUS_ACCOUNT_EXPIRED 0xC0000193 The user’s account has expired. STATUS_POSSIBLE_DEADLOCK 0xC0000194 {EXCEPTION}Possible deadlock condition. STATUS_REMOTE_SESSION_LIMIT 0xC0000196 An attempt was made to establish a session to a network server, but there are already too many sessions established to that server. STATUS_EVENTLOG_FILE_CHANGED 0xC0000197 The log file has changed between reads. STATUS_FS_DRIVER_REQUIRED 0xC000019C A volume has been accessed for which a file system driver is required that has not yet been loaded. STATUS_INVALID_LOCK_RANGE 0xC00001A1 A requested file lock operation cannot be processed due to an invalid byte range. STATUS_INVALID_ACE_CONDITION 0xC00001A2 {Invalid ACE Condition}The specified access control entry (ACE) contains an invalid condition. STATUS_DUPLICATE_PRIVILEGES 0xC00001A6 Duplicate privileges were specified for the token. STATUS_REPAIR_NEEDED 0xC00001A8 A portion of the file system requires repair. STATUS_QUOTA_NOT_ENABLED 0xC00001A9 Quota support is not enabled on the system. STATUS_NO_APPLICATION_PACKAGE 0xC00001AA The operation failed because the application is not part of an application package. STATUS_NETWORK_OPEN_RESTRICTION 0xC0000201 A remote open failed because the network open restrictions were not satisfied. STATUS_NO_USER_SESSION_KEY 0xC0000202 There is no user session key for the specified logon session. STATUS_USER_SESSION_DELETED 0xC0000203 The remote user session has been deleted. STATUS_RESOURCE_LANG_NOT_FOUND 0xC0000204 Indicates the specified resource language ID cannot be found in theimage file. STATUS_INSUFF_SERVER_RESOURCES 0xC0000205 Insufficient server resources exist to complete the request. STATUS_INVALID_BUFFER_SIZE 0xC0000206 The size of the buffer is invalid for the specified operation. STATUS_INVALID_ADDRESS_WILDCARD 0xC0000208 The transport rejected the network address specified due to an invalid use of a wildcard. STATUS_TOO_MANY_ADDRESSES 0xC0000209 The transport address could not be opened because all the available addresses are in use. STATUS_ADDRESS_ALREADY_EXISTS 0xC000020A The transport address could not be opened because it already exists. STATUS_ADDRESS_CLOSED 0xC000020B The transport address is now closed. STATUS_CONNECTION_DISCONNECTED 0xC000020C The transport connection is now disconnected. STATUS_CONNECTION_RESET 0xC000020D The transport connection has been reset. STATUS_TOO_MANY_NODES 0xC000020E The transport cannot dynamically acquire any more nodes. STATUS_TRANSACTION_ABORTED 0xC000020F The transport aborted a pending transaction. STATUS_TRANSACTION_TIMED_OUT 0xC0000210 The transport timed out a request waiting for a response. STATUS_TRANSACTION_NO_RELEASE 0xC0000211 The transport did not receive a release for a pending response. STATUS_TRANSACTION_NO_MATCH 0xC0000212 The transport did not find a transaction matching the specific token. STATUS_TRANSACTION_RESPONDED 0xC0000213 The transport had previously responded to a transaction request. STATUS_TRANSACTION_INVALID_ID 0xC0000214 The transport does not recognized the transaction request identifier specified. STATUS_TRANSACTION_INVALID_TYPE 0xC0000215 The transport does not recognize the transaction request type specified. STATUS_NOT_SERVER_SESSION 0xC0000216 The transport can only process the specified request on the server side of a session. STATUS_NOT_CLIENT_SESSION 0xC0000217 The transport can only process the specified request on the client side of a session. STATUS_DEBUG_ATTACH_FAILED 0xC0000219 {Unexpected Failure in DebugActiveProcess}An unexpected failure occurred while processing a DebugActiveProcess API request. You may choose OK to terminate the process, or Cancel to ignore the error. STATUS_DATA_NOT_ACCEPTED 0xC000021B {Data Not Accepted}The TDI client could not handle the data received during an indication. STATUS_NO_BROWSER_SERVERS_FOUND 0xC000021C {Unable to Retrieve Browser Server List}The list of servers for this workgroup is not currently available. STATUS_VDM_HARD_ERROR 0xC000021D NTVDM encountered a hard error. STATUS_DRIVER_CANCEL_TIMEOUT 0xC000021E {Cancel Timeout}The driver hs failed to complete a cancelled I/O request in the allotted time. STATUS_REPLY_MESSAGE_MISMATCH 0xC000021F {Reply Message Mismatch}An attempt was made to reply to an LPC message, but the thread specified by the client ID in the message was not waiting on that message. STATUS_MAPPED_ALIGNMENT 0xC0000220 {Mapped View Alignment Incorrect}An attempt was made to map a view of a file, but either the specified base address or the offset into the file were not aligned on the proper allocation granularity. STATUS_IMAGE_CHECKSUM_MISMATCH 0xC0000221 {Bad Image Checksum}The image hs is possibly corrupt. The header checksum does not match the computed checksum. STATUS_LOST_WRITEBEHIND_DATA 0xC0000222 {Delayed Write Failed}Windows was unable to save all the data for the file hs. The data has been lost. This error may be caused by a failure of your computer hardware or network connection. Please try to save this file elsewhere. STATUS_PASSWORD_MUST_CHANGE 0xC0000224 The user’s password must be changed before signing in. STATUS_NOT_FOUND 0xC0000225 The object was not found. STATUS_NOT_TINY_STREAM 0xC0000226 The stream is not a tiny stream. STATUS_RECOVERY_FAILURE 0xC0000227 A transaction recover failed. STATUS_STACK_OVERFLOW_READ 0xC0000228 The request must be handled by the stack overflow code. STATUS_FAIL_CHECK 0xC0000229 A consistency check failed. STATUS_DUPLICATE_OBJECTID 0xC000022A The attempt to insert the ID in the index failed because the ID is already in the index. STATUS_OBJECTID_EXISTS 0xC000022B The attempt to set the object’s ID failed because the object already has an ID. STATUS_CONVERT_TO_LARGE 0xC000022C Internal OFS status codes indicating how an allocation operation is handled. Either it is retried after the containing onode is moved or the extent stream is converted to a large stream. STATUS_RETRY 0xC000022D The request needs to be retried. STATUS_FOUND_OUT_OF_SCOPE 0xC000022E The attempt to find the object found an object matching by ID on the volume but it is out of the scope of the handle used for the operation. STATUS_ALLOCATE_BUCKET 0xC000022F The bucket array must be grown. Retry transaction after doing so. STATUS_PROPSET_NOT_FOUND 0xC0000230 The property set specified does not exist on the object. STATUS_MARSHALL_OVERFLOW 0xC0000231 The user/kernel marshalling buffer has overflowed. STATUS_INVALID_VARIANT 0xC0000232 The supplied variant structure contains invalid data. STATUS_ACCOUNT_LOCKED_OUT 0xC0000234 The user account has been automatically locked because too many invalid logon attempts or password change attempts have been requested. STATUS_HANDLE_NOT_CLOSABLE 0xC0000235 NtClose was called on a handle that was protected from close via NtSetInformationObject. STATUS_CONNECTION_REFUSED 0xC0000236 The transport connection attempt was refused by the remote system. STATUS_GRACEFUL_DISCONNECT 0xC0000237 The transport connection was gracefully closed. STATUS_ADDRESS_NOT_ASSOCIATED 0xC0000239 An address has not yet been associated with the transport endpoint. STATUS_CONNECTION_INVALID 0xC000023A An operation was attempted on a nonexistent transport connection. STATUS_CONNECTION_ACTIVE 0xC000023B An invalid operation was attempted on an active transport connection. STATUS_NETWORK_UNREACHABLE 0xC000023C The remote network is not reachable by the transport. STATUS_HOST_UNREACHABLE 0xC000023D The remote system is not reachable by the transport. STATUS_PROTOCOL_UNREACHABLE 0xC000023E The remote system does not support the transport protocol. STATUS_PORT_UNREACHABLE 0xC000023F No service is operating at the destination port of the transport on the remote system. STATUS_REQUEST_ABORTED 0xC0000240 The request was aborted. STATUS_CONNECTION_ABORTED 0xC0000241 The transport connection was aborted by the local system. STATUS_BAD_COMPRESSION_BUFFER 0xC0000242 The specified buffer contains ill-formed data. STATUS_USER_MAPPED_FILE 0xC0000243 The requested operation cannot be performed on a file with a user mapped section open. STATUS_AUDIT_FAILED 0xC0000244 {Audit Failed}An attempt to generate a security audit failed. STATUS_TIMER_RESOLUTION_NOT_SET 0xC0000245 The timer resolution was not previously set by the current process. STATUS_CONNECTION_COUNT_LIMIT 0xC0000246 A connection to the server could not be made because the limit on the number of concurrent connections for this account has been reached. STATUS_LOGIN_TIME_RESTRICTION 0xC0000247 Attempting to login during an unauthorized time of day for this account. STATUS_LOGIN_WKSTA_RESTRICTION 0xC0000248 The account is not authorized to login from this station. STATUS_IMAGE_MP_UP_MISMATCH 0xC0000249 {UP/MP Image Mismatch}The image hs has been modified for use on a uniprocessor system, but you are running it on a multiprocessor machine.

Please reinstall the image file.

STATUS_INSUFFICIENT_LOGON_INFO 0xC0000250 There is insufficient account information to log you on. STATUS_BAD_DLL_ENTRYPOINT 0xC0000251 {Invalid DLL Entrypoint}The dynamic link library hs is not written correctly. The stack pointer has been left in an inconsistent state. The entrypoint should be declared as WINAPI or STDCALL. Select YES to fail the DLL load. Select NO to continue execution. Selecting NO may cause the application to operate incorrectly. STATUS_BAD_SERVICE_ENTRYPOINT 0xC0000252 {Invalid Service Callback Entrypoint}The hs service is not written correctly. The stack pointer has been left in an inconsistent state. The callback entrypoint should be declared as WINAPI or STDCALL. Selecting OK will cause the service to continue operation. However, the service process may operate incorrectly. STATUS_LPC_REPLY_LOST 0xC0000253 The server received the messages but did not send a reply. STATUS_IP_ADDRESS_CONFLICT1 0xC0000254 There is an IP address conflict with another system on the network STATUS_IP_ADDRESS_CONFLICT2 0xC0000255 There is an IP address conflict with another system on the network STATUS_REGISTRY_QUOTA_LIMIT 0xC0000256 {Low On Registry Space}The system has reached the maximum size allowed for the system part of the registry. Additional storage requests will be ignored. STATUS_PATH_NOT_COVERED 0xC0000257 The contacted server does not support the indicated part of the DFS namespace. STATUS_NO_CALLBACK_ACTIVE 0xC0000258 A callback return system service cannot be executed when no callback is active. STATUS_LICENSE_QUOTA_EXCEEDED 0xC0000259 The service being accessed is licensed for a particular number of connections. No more connections can be made to the service at this time because there are already as many connections as the service can accept. STATUS_PWD_TOO_SHORT 0xC000025A The password provided is too short to meet the policy of your user account. Please choose a longer password. STATUS_PWD_TOO_RECENT 0xC000025B The policy of your user account does not allow you to change passwords too frequently. This is done to prevent users from changing back to a familiar, but potentially discovered, password. If you feel your password has been compromised then please contact your administrator immediately to have a new one assigned. STATUS_PWD_HISTORY_CONFLICT 0xC000025C You have attempted to change your password to one that you have used in the past. The policy of your user account does not allow this. Please select a password that you have not previously used. STATUS_PLUGPLAY_NO_DEVICE 0xC000025E You have attempted to load a legacy device driver while its device instance had been disabled. STATUS_UNSUPPORTED_COMPRESSION 0xC000025F The specified compression format is unsupported. STATUS_INVALID_HW_PROFILE 0xC0000260 The specified hardware profile configuration is invalid. STATUS_DRIVER_ORDINAL_NOT_FOUND 0xC0000262 {Driver Entry Point Not Found}The hs device driver could not locate the ordinal ld in driver hs. STATUS_RESOURCE_NOT_OWNED 0xC0000264 {Application Error}The application attempted to release a resource it did not own. Click OK to terminate the application. STATUS_TOO_MANY_LINKS 0xC0000265 An attempt was made to create more links on a file than the file system supports. STATUS_QUOTA_LIST_INCONSISTENT 0xC0000266 The specified quota list is internally inconsistent with its descriptor. STATUS_FILE_IS_OFFLINE 0xC0000267 The specified file has been relocated to offline storage. STATUS_EVALUATION_EXPIRATION 0xC0000268 {Windows Evaluation Notification}The evaluation period for this installation of Windows has expired. This system will shutdown in 1 hour. To restore access to this installation of Windows, please upgrade this installation using a licensed distribution of this product. STATUS_ILLEGAL_DLL_RELOCATION 0xC0000269 {Illegal System DLL Relocation}The system DLL hs was relocated in memory. The application will not run properly. The relocation occurred because the DLL hs occupied an address range reserved for Windows system DLLs. The vendor supplying the DLL should be contacted for a new DLL. STATUS_LICENSE_VIOLATION 0xC000026A {License Violation}The system has detected tampering with your registered product type. This is a violation of your software license. Tampering with product type is not permitted. STATUS_DLL_INIT_FAILED_LOGOFF 0xC000026B {DLL Initialization Failed}The application failed to initialize because the window station is shutting down. STATUS_DRIVER_UNABLE_TO_LOAD 0xC000026C {Unable to Load Device Driver}hs device driver could not be loaded.

Error Status was 0xx

STATUS_DFS_UNAVAILABLE 0xC000026D DFS is unavailable on the contacted server. STATUS_VOLUME_DISMOUNTED 0xC000026E An operation was attempted to a volume after it was dismounted. STATUS_WX86_INTERNAL_ERROR 0xC000026F An internal error occurred in the Win32 x86 emulation subsystem. STATUS_WX86_FLOAT_STACK_CHECK 0xC0000270 Win32 x86 emulation subsystem Floating-point stack check. STATUS_VALIDATE_CONTINUE 0xC0000271 The validation process needs to continue on to the next step. STATUS_NO_MATCH 0xC0000272 There was no match for the specified key in the index. STATUS_NO_MORE_MATCHES 0xC0000273 There are no more matches for the current index enumeration. STATUS_NOT_A_REPARSE_POINT 0xC0000275 The NTFS file or directory is not a reparse point. STATUS_IO_REPARSE_TAG_INVALID 0xC0000276 The Windows I/O reparse tag passed for the NTFS reparse point is invalid. STATUS_IO_REPARSE_TAG_MISMATCH 0xC0000277 The Windows I/O reparse tag does not match the one present in the NTFS reparse point. STATUS_IO_REPARSE_DATA_INVALID 0xC0000278 The user data passed for the NTFS reparse point is invalid. STATUS_PWD_TOO_LONG 0xC000027A The password provided is too long to meet the policy of your user account. Please choose a shorter password. STATUS_STOWED_EXCEPTION 0xC000027B An application-internal exception has occurred. STATUS_RANGE_LIST_CONFLICT 0xC0000282 The range could not be added to the range list because of a conflict. STATUS_SOURCE_ELEMENT_EMPTY 0xC0000283 The specified medium changer source element contains no media. STATUS_DESTINATION_ELEMENT_FULL 0xC0000284 The specified medium changer destination element already contains media. STATUS_ILLEGAL_ELEMENT_ADDRESS 0xC0000285 The specified medium changer element does not exist. STATUS_MAGAZINE_NOT_PRESENT 0xC0000286 The specified element is contained within a magazine that is no longer present. STATUS_REINITIALIZATION_NEEDED 0xC0000287 The device requires reinitialization due to hardware errors. STATUS_DEVICE_REQUIRES_CLEANING 0x80000288 The device has indicated that cleaning is necessary. STATUS_DEVICE_DOOR_OPEN 0x80000289 The device has indicated that its door is open. Further operations require it closed and secured. STATUS_ENCRYPTION_FAILED 0xC000028A The file encryption attempt failed. STATUS_DECRYPTION_FAILED 0xC000028B The file decryption attempt failed. STATUS_RANGE_NOT_FOUND 0xC000028C The specified range could not be found in the range list. STATUS_NO_RECOVERY_POLICY 0xC000028D There is no encryption recovery policy configured for this system. STATUS_NO_EFS 0xC000028E The required encryption driver is not loaded for this system. STATUS_WRONG_EFS 0xC000028F The file was encrypted with a different encryption driver than is currently loaded. STATUS_NO_USER_KEYS 0xC0000290 There are no EFS keys defined for the user. STATUS_FILE_NOT_ENCRYPTED 0xC0000291 The specified file is not encrypted. STATUS_NOT_EXPORT_FORMAT 0xC0000292 The specified file is not in the defined EFS export format. STATUS_FILE_ENCRYPTED 0xC0000293 The specified file is encrypted and the user does not have the ability to decrypt it. STATUS_WAKE_SYSTEM 0x40000294 The system has awoken STATUS_WMI_GUID_NOT_FOUND 0xC0000295 The guid passed was not recognized as valid by a WMI data provider. STATUS_WMI_INSTANCE_NOT_FOUND 0xC0000296 The instance name passed was not recognized as valid by a WMI data provider. STATUS_WMI_ITEMID_NOT_FOUND 0xC0000297 The data item id passed was not recognized as valid by a WMI data provider. STATUS_WMI_TRY_AGAIN 0xC0000298 The WMI request could not be completed and should be retried. STATUS_SHARED_POLICY 0xC0000299 The policy object is shared and can only be modified at the root STATUS_POLICY_OBJECT_NOT_FOUND 0xC000029A The policy object does not exist when it should STATUS_POLICY_ONLY_IN_DS 0xC000029B The requested policy information only lives in the Ds STATUS_VOLUME_NOT_UPGRADED 0xC000029C The volume must be upgraded to enable this feature STATUS_NO_TRACKING_SERVICE 0xC000029F The tracking (workstation) service is not running. STATUS_SERVER_SID_MISMATCH 0xC00002A0 The server process is running under a SID different than that required by client. STATUS_DS_NO_ATTRIBUTE_OR_VALUE 0xC00002A1 The specified directory service attribute or value does not exist. STATUS_DS_BUSY 0xC00002A5 The directory service is busy. STATUS_DS_UNAVAILABLE 0xC00002A6 The directory service is not available. STATUS_DS_NO_RIDS_ALLOCATED 0xC00002A7 The directory service was unable to allocate a relative identifier. STATUS_DS_NO_MORE_RIDS 0xC00002A8 The directory service has exhausted the pool of relative identifiers. STATUS_DS_INCORRECT_ROLE_OWNER 0xC00002A9 The requested operation could not be performed because the directory service is not the master for that type of operation. STATUS_DS_RIDMGR_INIT_ERROR 0xC00002AA The directory service was unable to initialize the subsystem that allocates relative identifiers. STATUS_DS_OBJ_CLASS_VIOLATION 0xC00002AB The requested operation did not satisfy one or more constraints associated with the class of the object. STATUS_DS_CANT_ON_NON_LEAF 0xC00002AC The directory service can perform the requested operation only on a leaf object. STATUS_DS_CANT_ON_RDN 0xC00002AD The directory service cannot perform the requested operation on the Relatively Defined Name (RDN) attribute of an object. STATUS_DS_CANT_MOD_OBJ_CLASS 0xC00002AE The directory service detected an attempt to modify the object class of an object. STATUS_DS_CROSS_DOM_MOVE_FAILED 0xC00002AF An error occurred while performing a cross domain move operation. STATUS_DS_GC_NOT_AVAILABLE 0xC00002B0 Unable to Contact the Global Catalog Server. STATUS_CANT_ENABLE_DENY_ONLY 0xC00002B3 A group marked use for deny only cannot be enabled. STATUS_FLOAT_MULTIPLE_FAULTS 0xC00002B4 {EXCEPTION}Multiple floating point faults. STATUS_FLOAT_MULTIPLE_TRAPS 0xC00002B5 {EXCEPTION}Multiple floating point traps. STATUS_DEVICE_REMOVED 0xC00002B6 The device has been removed. STATUS_JOURNAL_NOT_ACTIVE 0xC00002B8 The volume change journal is not active. STATUS_NOINTERFACE 0xC00002B9 The requested interface is not supported. STATUS_DS_RIDMGR_DISABLED 0xC00002BA The directory service detected the subsystem that allocates relative identifiers is disabled. This can occur as a protective mechanism when the system determines a significant portion of relative identifiers (RIDs) have been exhausted. Please see http://go.microsoft.com/fwlink/?LinkId=228610 for recommended diagnostic steps and the procedure to re-enable account creation. STATUS_DS_ADMIN_LIMIT_EXCEEDED 0xC00002C1 A directory service resource limit has been exceeded. STATUS_DRIVER_FAILED_SLEEP 0xC00002C2 {System Standby Failed}The driver hs does not support standby mode. Updating this driver may allow the system to go to standby mode. STATUS_WMI_READ_ONLY 0xC00002C6 The WMI data item or data block is read only. STATUS_WMI_SET_FAILURE 0xC00002C7 The WMI data item or data block could not be changed. STATUS_COMMITMENT_MINIMUM 0xC00002C8 {Virtual Memory Minimum Too Low}Your system is low on virtual memory. Windows is increasing the size of your virtual memory paging file. During this process, memory requests for some applications may be denied. For more information, see Help. STATUS_REG_NAT_CONSUMPTION 0xC00002C9 {EXCEPTION}Register NaT consumption faults.

A NaT value is consumed on a non speculative instruction.

STATUS_TRANSPORT_FULL 0xC00002CA The medium changer’s transport element contains media, which is causing the operation to fail. STATUS_DS_SAM_INIT_FAILURE 0xC00002CB Security Accounts Manager initialization failed because of the following error:hs

Error Status: 0xx.

Please shutdown this system and reboot into Directory Services Restore Mode, check the event log for more detailed information.

STATUS_ONLY_IF_CONNECTED 0xC00002CC This operation is supported only when you are connected to the server. STATUS_PNP_RESTART_ENUMERATION 0xC00002CE A device was removed so enumeration must be restarted. STATUS_JOURNAL_ENTRY_DELETED 0xC00002CF The journal entry has been deleted from the journal. STATUS_PNP_REBOOT_REQUIRED 0xC00002D2 Device will not start without a reboot. STATUS_POWER_STATE_INVALID 0xC00002D3 Current device power state cannot support this request. STATUS_DS_INVALID_GROUP_TYPE 0xC00002D4 The specified group type is invalid. STATUS_DS_HAVE_PRIMARY_MEMBERS 0xC00002DC Cannot change to security disabled group because of having primary members in this group. STATUS_WMI_NOT_SUPPORTED 0xC00002DD The WMI operation is not supported by the data block or method. STATUS_INSUFFICIENT_POWER 0xC00002DE There is not enough power to complete the requested operation. STATUS_SAM_NEED_BOOTKEY_FLOPPY 0xC00002E0 Security Account Manager needs to get the boot key from floppy disk. STATUS_DS_CANT_START 0xC00002E1 Directory Service cannot start. STATUS_DS_INIT_FAILURE 0xC00002E2 Directory Services could not start because of the following error:hs

Error Status: 0xx.

Please shutdown this system and reboot into Directory Services Restore Mode, check the event log for more detailed information.

STATUS_SAM_INIT_FAILURE 0xC00002E3 Security Accounts Manager initialization failed because of the following error:hs

Error Status: 0xx.

Please click OK to shutdown this system and reboot into Safe Mode, check the event log for more detailed information.

STATUS_DS_GC_REQUIRED 0xC00002E4 The requested operation can be performed only on a global catalog server. STATUS_MULTIPLE_FAULT_VIOLATION 0xC00002E8 STATUS_MULTIPLE_FAULT_VIOLATION STATUS_CANNOT_MAKE 0xC00002EA The directory or file cannot be created. STATUS_SYSTEM_SHUTDOWN 0xC00002EB The system is in the process of shutting down. STATUS_DS_INIT_FAILURE_CONSOLE 0xC00002EC Directory Services could not start because of the following error:hs

Error Status: 0xx.

Please click OK to shutdown the system. You can use the recovery console to diagnose the system further.

STATUS_NO_TGT_REPLY 0xC00002EF The client is trying to negotiate a context and the server requires user-to-user but didn’t send a TGT reply. STATUS_OBJECTID_NOT_FOUND 0xC00002F0 An object ID was not found in the file. STATUS_NO_IP_ADDRESSES 0xC00002F1 Unable to accomplish the requested task because the local machine does not have any IP addresses. STATUS_WRONG_CREDENTIAL_HANDLE 0xC00002F2 The supplied credential handle does not match the credential associated with the security context. STATUS_CRYPTO_SYSTEM_INVALID 0xC00002F3 The crypto system or checksum function is invalid because a required function is unavailable. STATUS_MAX_REFERRALS_EXCEEDED 0xC00002F4 The number of maximum ticket referrals has been exceeded. STATUS_MUST_BE_KDC 0xC00002F5 The local machine must be a Kerberos KDC (domain controller) and it is not. STATUS_TOO_MANY_PRINCIPALS 0xC00002F7 The KDC reply contained more than one principal name. STATUS_NO_PA_DATA 0xC00002F8 Expected to find PA data for a hint of what etype to use, but it was not found. STATUS_PKINIT_NAME_MISMATCH 0xC00002F9 The client certificate does not contain a valid UPN, or does not match the client name in the logon request. Please contact your administrator. STATUS_SMARTCARD_LOGON_REQUIRED 0xC00002FA Smartcard logon is required and was not used. STATUS_KDC_INVALID_REQUEST 0xC00002FB An invalid request was sent to the KDC. STATUS_KDC_UNABLE_TO_REFER 0xC00002FC The KDC was unable to generate a referral for the service requested. STATUS_KDC_UNKNOWN_ETYPE 0xC00002FD The encryption type requested is not supported by the KDC. STATUS_SHUTDOWN_IN_PROGRESS 0xC00002FE A system shutdown is in progress. STATUS_NOT_SUPPORTED_ON_SBS 0xC0000300 This operation is not supported on a computer running Windows Server 2003 for Small Business Server STATUS_WMI_GUID_DISCONNECTED 0xC0000301 The WMI GUID is no longer available STATUS_WMI_ALREADY_DISABLED 0xC0000302 Collection or events for the WMI GUID is already disabled. STATUS_WMI_ALREADY_ENABLED 0xC0000303 Collection or events for the WMI GUID is already enabled. STATUS_MFT_TOO_FRAGMENTED 0xC0000304 The Master File Table on the volume is too fragmented to complete this operation. STATUS_COPY_PROTECTION_FAILURE 0xC0000305 Copy protection failure. STATUS_CSS_KEY_NOT_PRESENT 0xC0000307 Copy protection error – The given sector does not contain a valid key. STATUS_CSS_KEY_NOT_ESTABLISHED 0xC0000308 Copy protection error – DVD session key not established. STATUS_CSS_SCRAMBLED_SECTOR 0xC0000309 Copy protection error – The read failed because the sector is encrypted. STATUS_CSS_REGION_MISMATCH 0xC000030A Copy protection error – The given DVD’s region does not correspond to theregion setting of the drive. STATUS_CSS_RESETS_EXHAUSTED 0xC000030B Copy protection error – The drive’s region setting may be permanent. STATUS_PASSWORD_CHANGE_REQUIRED 0xC000030C EAS policy requires that the user change their password before this operation can be performed. STATUS_PKINIT_FAILURE 0xC0000320 The Kerberos protocol encountered an error while validating the KDC certificate during smartcard Logon. There is more information in the system event log. STATUS_NO_KERB_KEY 0xC0000322 The target server does not have acceptable Kerberos credentials. STATUS_HOST_DOWN 0xC0000350 The transport determined that the remote system is down. STATUS_UNSUPPORTED_PREAUTH 0xC0000351 An unsupported preauthentication mechanism was presented to the Kerberos package. STATUS_EFS_ALG_BLOB_TOO_BIG 0xC0000352 The encryption algorithm used on the source file needs a bigger key buffer than the one used on the destination file. STATUS_PORT_NOT_SET 0xC0000353 An attempt to remove a process’s DebugPort was made, but a port was not already associated with the process. STATUS_DEBUGGER_INACTIVE 0xC0000354 Debugger Inactive: Windows may have been started without kernel debugging enabled. STATUS_DS_VERSION_CHECK_FAILURE 0xC0000355 This version of Windows is not compatible with the behavior version of directory forest, domain or domain controller. STATUS_AUDITING_DISABLED 0xC0000356 The specified event is currently not being audited. STATUS_PRENT4_MACHINE_ACCOUNT 0xC0000357 The machine account was created pre-NT4. The account needs to be recreated. STATUS_INVALID_IMAGE_WIN_32 0xC0000359 The specified image file did not have the correct format, it appears to be a 32-bit Windows image. STATUS_INVALID_IMAGE_WIN_64 0xC000035A The specified image file did not have the correct format, it appears to be a 64-bit Windows image. STATUS_BAD_BINDINGS 0xC000035B Client’s supplied SSPI channel bindings were incorrect. STATUS_NETWORK_SESSION_EXPIRED 0xC000035C The client’s session has expired, so the client must reauthenticate to continue accessing the remote resources. STATUS_APPHELP_BLOCK 0xC000035D AppHelp dialog canceled thus preventing the application from starting. STATUS_ALL_SIDS_FILTERED 0xC000035E The SID filtering operation removed all SIDs. STATUS_NOT_SAFE_MODE_DRIVER 0xC000035F The driver was not loaded because the system is booting into safe mode. STATUS_FAILED_DRIVER_ENTRY 0xC0000365 The driver was not loaded because it failed its initialization call. STATUS_DEVICE_ENUMERATION_ERROR 0xC0000366 The “hs” encountered an error while applying power or reading the device configuration. This may be caused by a failure of your hardware or by a poor connection. STATUS_MOUNT_POINT_NOT_RESOLVED 0xC0000368 The create operation failed because the name contained at least one mount point which resolves to a volume to which the specified device object is not attached. STATUS_MCA_OCCURED 0xC000036A A Machine Check Error has occurred. Please check the system eventlog for additional information. STATUS_SYSTEM_HIVE_TOO_LARGE 0xC000036E System hive size has exceeded its limit. STATUS_DS_SHUTTING_DOWN 0x40000370 The Directory Service is shutting down. STATUS_NO_SECRETS 0xC0000371 The local account store does not contain secret material for the specified account. STATUS_FAILED_STACK_SWITCH 0xC0000373 The system was not able to allocate enough memory to perform a stack switch. STATUS_HEAP_CORRUPTION 0xC0000374 A heap has been corrupted. STATUS_SMARTCARD_WRONG_PIN 0xC0000380 An incorrect PIN was presented to the smart card STATUS_SMARTCARD_CARD_BLOCKED 0xC0000381 The smart card is blocked STATUS_SMARTCARD_NO_CARD 0xC0000383 No smart card available STATUS_SMARTCARD_NO_CERTIFICATE 0xC0000385 The requested certificate does not exist on the smart card STATUS_SMARTCARD_NO_KEYSET 0xC0000386 The requested keyset does not exist STATUS_SMARTCARD_IO_ERROR 0xC0000387 A communication error with the smart card has been detected. STATUS_DOWNGRADE_DETECTED 0xC0000388 The system cannot contact a domain controller to service the authentication request. Please try again later. STATUS_SMARTCARD_CERT_REVOKED 0xC0000389 The smartcard certificate used for authentication has been revoked. Please contact your system administrator. There may be additional information in the event log. STATUS_ISSUING_CA_UNTRUSTED 0xC000038A An untrusted certificate authority was detected while processing the smartcard certificate used for authentication. Please contact your system administrator. STATUS_REVOCATION_OFFLINE_C 0xC000038B The revocation status of the smartcard certificate used for authentication could not be determined. Please contact your system administrator. STATUS_PKINIT_CLIENT_FAILURE 0xC000038C The smartcard certificate used for authentication was not trusted. Please contact your system administrator. STATUS_SMARTCARD_CERT_EXPIRED 0xC000038D The smartcard certificate used for authentication has expired. Pleasecontact your system administrator. STATUS_SMARTCARD_SILENT_CONTEXT 0xC000038F The smartcard provider could not perform the action since the context was acquired as silent. STATUS_DS_NAME_NOT_UNIQUE 0xC0000404 The requested name already exists as a unique identifier. STATUS_DS_DUPLICATE_ID_FOUND 0xC0000405 The requested object has a non-unique identifier and cannot be retrieved. STATUS_USER2USER_REQUIRED 0xC0000408 Kerberos sub-protocol User2User is required. STATUS_STACK_BUFFER_OVERRUN 0xC0000409 The system detected an overrun of a stack-based buffer in this application. This overrun could potentially allow a malicious user to gain control of this application. STATUS_NO_S4U_PROT_SUPPORT 0xC000040A The Kerberos subsystem encountered an error. A service for user protocol request was made against a domain controller which does not support service for user. STATUS_REVOCATION_OFFLINE_KDC 0xC000040C The revocation status of the domain controller certificate used for smartcard authentication could not be determined. There is additional information in the system event log. Please contact your system administrator. STATUS_ISSUING_CA_UNTRUSTED_KDC 0xC000040D An untrusted certificate authority was detected while processing the domain controller certificate used for authentication. There is additional information in the system event log. Please contact your system administrator. STATUS_KDC_CERT_EXPIRED 0xC000040E The domain controller certificate used for smartcard logon has expired. Please contact your system administrator with the contents of your system event log. STATUS_KDC_CERT_REVOKED 0xC000040F The domain controller certificate used for smartcard logon has been revoked. Please contact your system administrator with the contents of your system event log. STATUS_PARAMETER_QUOTA_EXCEEDED 0xC0000410 Data present in one of the parameters is more than the function can operate on. STATUS_HIBERNATION_FAILURE 0xC0000411 The system has failed to hibernate (The error code is hs). Hibernation will be disabled until the system is restarted. STATUS_DELAY_LOAD_FAILED 0xC0000412 An attempt to delay-load a .dll or get a function address in a delay-loaded .dll failed. STATUS_VDM_DISALLOWED 0xC0000414 hs is a 16-bit application. You do not have permissions to execute 16-bit applications. Check your permissions with your system administrator. STATUS_NTLM_BLOCKED 0xC0000418 The authentication failed since NTLM was blocked. STATUS_ASSERTION_FAILURE 0xC0000420 An assertion failure has occurred. STATUS_VERIFIER_STOP 0xC0000421 Application verifier has found an error in the current process. STATUS_CALLBACK_POP_STACK 0xC0000423 An exception has occurred in a user mode callback and the kernel callback frame should be removed. STATUS_HIVE_UNLOADED 0xC0000425 Illegal operation attempted on a registry key which has already been unloaded. STATUS_COMPRESSION_DISABLED 0xC0000426 Compression is disabled for this volume. STATUS_FILE_SYSTEM_LIMITATION 0xC0000427 The requested operation could not be completed due to a file system limitation STATUS_INVALID_IMAGE_HASH 0xC0000428 Windows cannot verify the digital signature for this file. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source. STATUS_NOT_CAPABLE 0xC0000429 The implementation is not capable of performing the request. STATUS_REQUEST_OUT_OF_SEQUENCE 0xC000042A The requested operation is out of order with respect to other operations. STATUS_IMPLEMENTATION_LIMIT 0xC000042B An operation attempted to exceed an implementation-defined limit. STATUS_ELEVATION_REQUIRED 0xC000042C The requested operation requires elevation. STATUS_NO_SECURITY_CONTEXT 0xC000042D The required security context does not exist. STATUS_PKU2U_CERT_FAILURE 0xC000042F The PKU2U protocol encountered an error while attempting to utilize the associated certificates. STATUS_BEYOND_VDL 0xC0000432 The operation was attempted beyond the valid data length of the file. STATUS_PTE_CHANGED 0xC0000434 The page fault mappings changed in the middle of processing a fault so the operation must be retried. STATUS_PURGE_FAILED 0xC0000435 The attempt to purge this file from memory failed to purge some or all the data from memory. STATUS_INVALID_LABEL 0xC0000446 Indicates a particular Security ID may not be assigned as the label of an object. STATUS_AMBIGUOUS_SYSTEM_DEVICE 0xC0000451 The requested system device cannot be identified due to multiple indistinguishable devices potentially matching the identification criteria. STATUS_SYSTEM_DEVICE_NOT_FOUND 0xC0000452 The requested system device cannot be found. STATUS_RESTART_BOOT_APPLICATION 0xC0000453 This boot application must be restarted. STATUS_INVALID_SESSION 0xC0000455 The specified session is invalid. STATUS_THREAD_NOT_IN_SESSION 0xC0000457 The specified thread is not in a session. STATUS_INVALID_WEIGHT 0xC0000458 The specified weight is invalid. STATUS_REQUEST_PAUSED 0xC0000459 The operation was paused. STATUS_NO_RANGES_PROCESSED 0xC0000460 No ranges for the specified operation were able to be processed. STATUS_DISK_RESOURCES_EXHAUSTED 0xC0000461 The physical resources of this disk have been exhausted. STATUS_NEEDS_REMEDIATION 0xC0000462 The application cannot be started. Try reinstalling the application to fix the problem. STATUS_DEVICE_UNREACHABLE 0xC0000464 {Source/Destination device unreachable}The device is unreachable. STATUS_INVALID_TOKEN 0xC0000465 {Invalid Proxy Data Token}The token representing the data is invalid. STATUS_SERVER_UNAVAILABLE 0xC0000466 The file server is temporarily unavailable. STATUS_FILE_NOT_AVAILABLE 0xC0000467 The file is temporarily unavailable. STATUS_PACKAGE_UPDATING 0xC0000469 The application cannot be started because it is currently updating. STATUS_NOT_READ_FROM_COPY 0xC000046A The specified copy of the requested data could not be read. STATUS_FT_WRITE_FAILURE 0xC000046B The specified data could not be written to any of the copies. STATUS_FT_DI_SCAN_REQUIRED 0xC000046C One or more copies of data on this device may be out of sync. No writes may be performed until a data integrity scan is completed. STATUS_DATA_CHECKSUM_ERROR 0xC0000470 A data integrity checksum error occurred. Data in the file stream is corrupt. STATUS_INVALID_OFFSET_ALIGNMENT 0xC0000474 {Alignment Violation}The command specified a data offset that does not align to the device’s granularity/alignment. STATUS_OPERATION_IN_PROGRESS 0xC0000476 {Operation In Progress}An operation is currently in progress with the device. STATUS_SCRUB_DATA_DISABLED 0xC0000478 Scrub is disabled on the specified file. STATUS_NOT_REDUNDANT_STORAGE 0xC0000479 The storage device does not provide redundancy. STATUS_DIRECTORY_NOT_SUPPORTED 0xC000047C An operation is not supported on a directory. STATUS_IO_OPERATION_TIMEOUT 0xC000047D {IO Operation Timeout}The specified I/O operation failed to complete within the expected time period. STATUS_SYSTEM_NEEDS_REMEDIATION 0xC000047E An error in a system binary was detected. Try refreshing the PC to fix the problem. STATUS_SHARE_UNAVAILABLE 0xC0000480 The share is temporarily unavailable. STATUS_INVALID_TASK_NAME 0xC0000500 The specified task name is invalid. STATUS_INVALID_TASK_INDEX 0xC0000501 The specified task index is invalid. STATUS_THREAD_ALREADY_IN_TASK 0xC0000502 The specified thread is already joining a task. STATUS_CALLBACK_BYPASS 0xC0000503 A callback has requested to bypass native code. STATUS_UNDEFINED_SCOPE 0xC0000504 The Central Access Policy specified is not defined on the target machine. STATUS_INVALID_CAP 0xC0000505 The Central Access Policy obtained from Active Directory is invalid. STATUS_NOT_GUI_PROCESS 0xC0000506 Unable to finish the requested operation because the specified process is not a GUI process. STATUS_FAIL_FAST_EXCEPTION 0xC0000602 {Fail Fast Exception}A fail fast exception occurred. Exception handlers will not be invoked and the process will be terminated immediately. STATUS_IMAGE_CERT_REVOKED 0xC0000603 Windows cannot verify the digital signature for this file. The signing certificate for this file has been revoked. STATUS_PORT_CLOSED 0xC0000700 The ALPC port is closed. STATUS_MESSAGE_LOST 0xC0000701 The ALPC message requested is no longer available. STATUS_INVALID_MESSAGE 0xC0000702 The ALPC message supplied is invalid. STATUS_REQUEST_CANCELED 0xC0000703 The ALPC message has been canceled. STATUS_RECURSIVE_DISPATCH 0xC0000704 Invalid recursive dispatch attempt. STATUS_LPC_REQUESTS_NOT_ALLOWED 0xC0000707 The ALPC port does not accept new request messages. STATUS_RESOURCE_IN_USE 0xC0000708 The resource requested is already in use. STATUS_HARDWARE_MEMORY_ERROR 0xC0000709 The hardware has reported an uncorrectable memory error. STATUS_PROCESS_IS_PROTECTED 0xC0000712 Either the target process, or the target thread’s containing process, is a protected process. STATUS_MCA_EXCEPTION 0xC0000713 A Thread is getting dispatched with MCA EXCEPTION because of MCA. STATUS_SYMLINK_CLASS_DISABLED 0xC0000715 The symbolic link cannot be followed because its type is disabled. STATUS_NO_UNICODE_TRANSLATION 0xC0000717 No mapping for the Unicode character exists in the target multi-byte code page. STATUS_ALREADY_REGISTERED 0xC0000718 The provided callback is already registered. STATUS_CONTEXT_MISMATCH 0xC0000719 The provided context did not match the target. STATUS_INVALID_THREAD 0xC000071C An invalid thread, handle p, is specified for this operation. Possibly, a threadpool worker thread was specified. STATUS_CALLBACK_RETURNED_LANG 0xC000071F A threadpool worker thread enter a callback, which left with preferred languages set.This is unexpected, indicating that the callback missed clearing them. STATUS_DISK_REPAIR_DISABLED 0xC0000800 The attempted operation required self healing to be enabled. STATUS_DISK_QUOTA_EXCEEDED 0xC0000802 The requested file operation failed because the storage quota was exceeded.To free up disk space, move files to a different location or delete unnecessary files. For more information, contact your system administrator. STATUS_DATA_LOST_REPAIR 0x80000803 Windows discovered a corruption in the file “hs”.This file has now been repaired.

Please check if any data in the file was lost because of the corruption.

STATUS_CONTENT_BLOCKED 0xC0000804 The requested file operation failed because the storage policy blocks that type of file. For more information, contact your system administrator. STATUS_BAD_CLUSTERS 0xC0000805 The operation could not be completed due to bad clusters on disk. STATUS_VOLUME_DIRTY 0xC0000806 The operation could not be completed because the volume is dirty. Please run chkdsk and try again. STATUS_DISK_REPAIR_REDIRECTED 0x40000807 The volume repair could not be performed while it is online.Please schedule to take the volume offline so that it can be repaired. STATUS_DISK_REPAIR_UNSUCCESSFUL 0xC0000808 The volume repair was not successful. STATUS_CORRUPT_LOG_OVERFULL 0xC0000809 One of the volume corruption logs is full. Further corruptions that may be detected won’t be logged. STATUS_CORRUPT_LOG_CORRUPTED 0xC000080A One of the volume corruption logs is internally corrupted and needs to be recreated. The volume may contain undetected corruptions and must be scanned. STATUS_CORRUPT_LOG_UNAVAILABLE 0xC000080B One of the volume corruption logs is unavailable for being operated on. STATUS_CORRUPT_LOG_DELETED_FULL 0xC000080C One of the volume corruption logs was deleted while still having corruption records in them. The volume contains detected corruptions and must be scanned. STATUS_CORRUPT_LOG_CLEARED 0xC000080D One of the volume corruption logs was cleared by chkdsk and no longer contains real corruptions. STATUS_ORPHAN_NAME_EXHAUSTED 0xC000080E Orphaned files exist on the volume but could not be recovered because no more new names could be created in the recovery directory. Files must be moved from the recovery directory. STATUS_FILE_CHECKED_OUT 0xC0000901 This file is checked out or locked for editing by another user. STATUS_CHECKOUT_REQUIRED 0xC0000902 The file must be checked out before saving changes. STATUS_BAD_FILE_TYPE 0xC0000903 The file type being saved or retrieved has been blocked. STATUS_FILE_TOO_LARGE 0xC0000904 The file size exceeds the limit allowed and cannot be saved. STATUS_FORMS_AUTH_REQUIRED 0xC0000905 Access Denied. Before opening files in this location, you must first browse to the web site and select the option to login automatically. STATUS_VIRUS_INFECTED 0xC0000906 Operation did not complete successfully because the file contains a virus or potentially unwanted software. STATUS_VIRUS_DELETED 0xC0000907 This file contains a virus or potentially unwanted software and cannot be opened. Due to the nature of this virus or potentially unwanted software, the file has been removed from this location. STATUS_BAD_MCFG_TABLE 0xC0000908 The resources required for this device conflict with the MCFG table. STATUS_CANNOT_BREAK_OPLOCK 0xC0000909 The operation did not complete successfully because it would cause an oplock to be broken. The caller has requested that existing oplocks not be broken. STATUS_BAD_KEY 0xC000090A Bad key. STATUS_BAD_DATA 0xC000090B Bad data. STATUS_NO_KEY 0xC000090C Key does not exist. STATUS_FILE_HANDLE_REVOKED 0xC0000910 Access to the specified file handle has been revoked. STATUS_WOW_ASSERTION 0xC0009898 WOW Assertion Error. STATUS_INVALID_SIGNATURE 0xC000A000 The cryptographic signature is invalid. STATUS_HMAC_NOT_SUPPORTED 0xC000A001 The cryptographic provider does not support HMAC. STATUS_AUTH_TAG_MISMATCH 0xC000A002 The computed authentication tag did not match the input authentication tag. STATUS_INVALID_STATE_TRANSITION 0xC000A003 The requested state transition is invalid and cannot be performed. STATUS_INVALID_PEP_INFO_VERSION 0xC000A005 The supplied PEP information version is invalid. STATUS_IPSEC_QUEUE_OVERFLOW 0xC000A010 The IPSEC queue overflowed. STATUS_ND_QUEUE_OVERFLOW 0xC000A011 The neighbor discovery queue overflowed. STATUS_HOPLIMIT_EXCEEDED 0xC000A012 An ICMP hop limit exceeded error was received. STATUS_PROTOCOL_NOT_SUPPORTED 0xC000A013 The protocol is not installed on the local machine. STATUS_FASTPATH_REJECTED 0xC000A014 An operation or data has been rejected while on the network fast path. STATUS_XML_PARSE_ERROR 0xC000A083 Windows was unable to parse the requested XML data. STATUS_XMLDSIG_ERROR 0xC000A084 An error was encountered while processing an XML digital signature. STATUS_WRONG_COMPARTMENT 0xC000A085 Indicates that the caller made the connection request in the wrong routing compartment. STATUS_AUTHIP_FAILURE 0xC000A086 Indicates that there was an AuthIP failure when attempting to connect to the remote host. STATUS_DS_OID_NOT_FOUND 0xC000A088 The specified OID cannot be found. STATUS_INCORRECT_ACCOUNT_TYPE 0xC000A089 The system is not authoritative for the specified account and therefore cannot complete the operation. Please retry the operation using the provider associated with this account. If this is an online provider please use the provider’s online site. STATUS_HASH_NOT_SUPPORTED 0xC000A100 Hash generation for the specified version and hash type is not enabled on server. STATUS_HASH_NOT_PRESENT 0xC000A101 The hash requests is not present or not up to date with the current file contents. STATUS_GPIO_OPERATION_DENIED 0xC000A125 The requested operation is not suppported for the specified handle. STATUS_CANNOT_SWITCH_RUNLEVEL 0xC000A141 The requested run level switch cannot be completed successfully sinceone or more services refused to stop or restart. STATUS_INVALID_RUNLEVEL_SETTING 0xC000A142 The service has an invalid run level setting. The run level for a servicemust not be higher than the run level of its dependent services. STATUS_RUNLEVEL_SWITCH_TIMEOUT 0xC000A143 The requested run level switch cannot be completed successfully sinceone or more services will not stop or restart within the specified timeout. STATUS_NOT_APPCONTAINER 0xC000A200 This operation is only valid in the context of an app container. STATUS_APP_DATA_NOT_FOUND 0xC000A281 Fast Cache data not found. STATUS_APP_DATA_EXPIRED 0xC000A282 Fast Cache data expired. STATUS_APP_DATA_CORRUPT 0xC000A283 Fast Cache data corrupt. STATUS_APP_DATA_LIMIT_EXCEEDED 0xC000A284 Fast Cache data has exceeded its max size and cannot be updated. STATUS_APP_DATA_REBOOT_REQUIRED 0xC000A285 Fast Cache has been ReArmed and requires a reboot until it can be updated. DBG_NO_STATE_CHANGE 0xC0010001 Debugger did not perform a state change. DBG_APP_NOT_IDLE 0xC0010002 Debugger has found the application is not idle. RPC_NT_INVALID_STRING_BINDING 0xC0020001 The string binding is invalid. RPC_NT_WRONG_KIND_OF_BINDING 0xC0020002 The binding handle is not the correct type. RPC_NT_INVALID_BINDING 0xC0020003 The binding handle is invalid. RPC_NT_PROTSEQ_NOT_SUPPORTED 0xC0020004 The RPC protocol sequence is not supported. RPC_NT_INVALID_RPC_PROTSEQ 0xC0020005 The RPC protocol sequence is invalid. RPC_NT_INVALID_STRING_UUID 0xC0020006 The string UUID is invalid. RPC_NT_INVALID_ENDPOINT_FORMAT 0xC0020007 The endpoint format is invalid. RPC_NT_INVALID_NET_ADDR 0xC0020008 The network address is invalid. RPC_NT_NO_ENDPOINT_FOUND 0xC0020009 No endpoint was found. RPC_NT_INVALID_TIMEOUT 0xC002000A The timeout value is invalid. RPC_NT_OBJECT_NOT_FOUND 0xC002000B The object UUID was not found. RPC_NT_ALREADY_REGISTERED 0xC002000C The object UUID has already been registered. RPC_NT_TYPE_ALREADY_REGISTERED 0xC002000D The type UUID has already been registered. RPC_NT_ALREADY_LISTENING 0xC002000E The RPC server is already listening. RPC_NT_NO_PROTSEQS_REGISTERED 0xC002000F No protocol sequences have been registered. RPC_NT_NOT_LISTENING 0xC0020010 The RPC server is not listening. RPC_NT_UNKNOWN_MGR_TYPE 0xC0020011 The manager type is unknown. RPC_NT_UNKNOWN_IF 0xC0020012 The interface is unknown. RPC_NT_NO_BINDINGS 0xC0020013 There are no bindings. RPC_NT_NO_PROTSEQS 0xC0020014 There are no protocol sequences. RPC_NT_CANT_CREATE_ENDPOINT 0xC0020015 The endpoint cannot be created. RPC_NT_OUT_OF_RESOURCES 0xC0020016 Not enough resources are available to complete this operation. RPC_NT_SERVER_UNAVAILABLE 0xC0020017 The RPC server is unavailable. RPC_NT_SERVER_TOO_BUSY 0xC0020018 The RPC server is too busy to complete this operation. RPC_NT_INVALID_NETWORK_OPTIONS 0xC0020019 The network options are invalid. RPC_NT_NO_CALL_ACTIVE 0xC002001A There are no remote procedure calls active on this thread. RPC_NT_CALL_FAILED 0xC002001B The remote procedure call failed. RPC_NT_CALL_FAILED_DNE 0xC002001C The remote procedure call failed and did not execute. RPC_NT_PROTOCOL_ERROR 0xC002001D An RPC protocol error occurred. RPC_NT_UNSUPPORTED_TRANS_SYN 0xC002001F The transfer syntax is not supported by the RPC server. RPC_NT_UNSUPPORTED_TYPE 0xC0020021 The type UUID is not supported. RPC_NT_INVALID_TAG 0xC0020022 The tag is invalid. RPC_NT_INVALID_BOUND 0xC0020023 The array bounds are invalid. RPC_NT_NO_ENTRY_NAME 0xC0020024 The binding does not contain an entry name. RPC_NT_INVALID_NAME_SYNTAX 0xC0020025 The name syntax is invalid. RPC_NT_UNSUPPORTED_NAME_SYNTAX 0xC0020026 The name syntax is not supported. RPC_NT_UUID_NO_ADDRESS 0xC0020028 No network address is available to use to construct a UUID. RPC_NT_DUPLICATE_ENDPOINT 0xC0020029 The endpoint is a duplicate. RPC_NT_UNKNOWN_AUTHN_TYPE 0xC002002A The authentication type is unknown. RPC_NT_MAX_CALLS_TOO_SMALL 0xC002002B The maximum number of calls is too small. RPC_NT_STRING_TOO_LONG 0xC002002C The string is too long. RPC_NT_PROTSEQ_NOT_FOUND 0xC002002D The RPC protocol sequence was not found. RPC_NT_PROCNUM_OUT_OF_RANGE 0xC002002E The procedure number is out of range. RPC_NT_BINDING_HAS_NO_AUTH 0xC002002F The binding does not contain any authentication information. RPC_NT_UNKNOWN_AUTHN_SERVICE 0xC0020030 The authentication service is unknown. RPC_NT_UNKNOWN_AUTHN_LEVEL 0xC0020031 The authentication level is unknown. RPC_NT_INVALID_AUTH_IDENTITY 0xC0020032 The security context is invalid. RPC_NT_UNKNOWN_AUTHZ_SERVICE 0xC0020033 The authorization service is unknown. EPT_NT_INVALID_ENTRY 0xC0020034 The entry is invalid. EPT_NT_CANT_PERFORM_OP 0xC0020035 The operation cannot be performed. EPT_NT_NOT_REGISTERED 0xC0020036 There are no more endpoints available from the endpoint mapper. RPC_NT_NOTHING_TO_EXPORT 0xC0020037 No interfaces have been exported. RPC_NT_INCOMPLETE_NAME 0xC0020038 The entry name is incomplete. RPC_NT_INVALID_VERS_OPTION 0xC0020039 The version option is invalid. RPC_NT_NO_MORE_MEMBERS 0xC002003A There are no more members. RPC_NT_NOT_ALL_OBJS_UNEXPORTED 0xC002003B There is nothing to unexport. RPC_NT_INTERFACE_NOT_FOUND 0xC002003C The interface was not found. RPC_NT_ENTRY_ALREADY_EXISTS 0xC002003D The entry already exists. RPC_NT_ENTRY_NOT_FOUND 0xC002003E The entry is not found. RPC_NT_NAME_SERVICE_UNAVAILABLE 0xC002003F The name service is unavailable. RPC_NT_INVALID_NAF_ID 0xC0020040 The network address family is invalid. RPC_NT_CANNOT_SUPPORT 0xC0020041 The requested operation is not supported. RPC_NT_NO_CONTEXT_AVAILABLE 0xC0020042 No security context is available to allow impersonation. RPC_NT_INTERNAL_ERROR 0xC0020043 An internal error occurred in RPC. RPC_NT_ZERO_DIVIDE 0xC0020044 The RPC server attempted an integer divide by zero. RPC_NT_ADDRESS_ERROR 0xC0020045 An addressing error occurred in the RPC server. RPC_NT_FP_DIV_ZERO 0xC0020046 A floating point operation at the RPC server caused a divide by zero. RPC_NT_FP_UNDERFLOW 0xC0020047 A floating point underflow occurred at the RPC server. RPC_NT_FP_OVERFLOW 0xC0020048 A floating point overflow occurred at the RPC server. RPC_NT_NO_MORE_ENTRIES 0xC0030001 The list of RPC servers available for auto-handle binding has been exhausted. RPC_NT_SS_CHAR_TRANS_OPEN_FAIL 0xC0030002 The file designated by DCERPCCHARTRANS cannot be opened. RPC_NT_SS_CHAR_TRANS_SHORT_FILE 0xC0030003 The file containing the character translation table has fewer than 512 bytes. RPC_NT_SS_IN_NULL_CONTEXT 0xC0030004 A null context handle is passed as an [in] parameter. RPC_NT_SS_CONTEXT_MISMATCH 0xC0030005 The context handle does not match any known context handles. RPC_NT_SS_CONTEXT_DAMAGED 0xC0030006 The context handle changed during a call. RPC_NT_SS_HANDLES_MISMATCH 0xC0030007 The binding handles passed to a remote procedure call do not match. RPC_NT_NULL_REF_POINTER 0xC0030009 A null reference pointer was passed to the stub. RPC_NT_ENUM_VALUE_OUT_OF_RANGE 0xC003000A The enumeration value is out of range. RPC_NT_BYTE_COUNT_TOO_SMALL 0xC003000B The byte count is too small. RPC_NT_BAD_STUB_DATA 0xC003000C The stub received bad data. RPC_NT_CALL_IN_PROGRESS 0xC0020049 A remote procedure call is already in progress for this thread. RPC_NT_NO_MORE_BINDINGS 0xC002004A There are no more bindings. RPC_NT_GROUP_MEMBER_NOT_FOUND 0xC002004B The group member was not found. EPT_NT_CANT_CREATE 0xC002004C The endpoint mapper database entry could not be created. RPC_NT_INVALID_OBJECT 0xC002004D The object UUID is the nil UUID. RPC_NT_NO_INTERFACES 0xC002004F No interfaces have been registered. RPC_NT_CALL_CANCELLED 0xC0020050 The remote procedure call was cancelled. RPC_NT_BINDING_INCOMPLETE 0xC0020051 The binding handle does not contain all required information. RPC_NT_COMM_FAILURE 0xC0020052 A communications failure occurred during a remote procedure call. RPC_NT_UNSUPPORTED_AUTHN_LEVEL 0xC0020053 The requested authentication level is not supported. RPC_NT_NO_PRINC_NAME 0xC0020054 No principal name registered. RPC_NT_NOT_RPC_ERROR 0xC0020055 The error specified is not a valid Windows RPC error code. RPC_NT_UUID_LOCAL_ONLY 0x40020056 A UUID that is valid only on this computer has been allocated. RPC_NT_SEC_PKG_ERROR 0xC0020057 A security package specific error occurred. RPC_NT_NOT_CANCELLED 0xC0020058 Thread is not cancelled. RPC_NT_INVALID_ES_ACTION 0xC0030059 Invalid operation on the encoding/decoding handle. RPC_NT_WRONG_ES_VERSION 0xC003005A Incompatible version of the serializing package. RPC_NT_WRONG_STUB_VERSION 0xC003005B Incompatible version of the RPC stub. RPC_NT_INVALID_PIPE_OBJECT 0xC003005C The RPC pipe object is invalid or corrupted. RPC_NT_INVALID_PIPE_OPERATION 0xC003005D An invalid operation was attempted on an RPC pipe object. RPC_NT_WRONG_PIPE_VERSION 0xC003005E Unsupported RPC pipe version. RPC_NT_PIPE_CLOSED 0xC003005F The RPC pipe object has already been closed. RPC_NT_PIPE_DISCIPLINE_ERROR 0xC0030060 The RPC call completed before all pipes were processed. RPC_NT_PIPE_EMPTY 0xC0030061 No more data is available from the RPC pipe. RPC_NT_INVALID_ASYNC_HANDLE 0xC0020062 Invalid asynchronous remote procedure call handle. RPC_NT_INVALID_ASYNC_CALL 0xC0020063 Invalid asynchronous RPC call handle for this operation. RPC_NT_PROXY_ACCESS_DENIED 0xC0020064 Access to the HTTP proxy is denied. RPC_NT_COOKIE_AUTH_FAILED 0xC0020065 HTTP proxy server rejected the connection because the cookie authentication failed. RPC_NT_SEND_INCOMPLETE 0x400200AF Some data remains to be sent in the request buffer. STATUS_ACPI_INVALID_OPCODE 0xC0140001 An attempt was made to run an invalid AML opcode STATUS_ACPI_STACK_OVERFLOW 0xC0140002 The AML Interpreter Stack has overflowed STATUS_ACPI_ASSERT_FAILED 0xC0140003 An inconsistent state has occurred STATUS_ACPI_INVALID_INDEX 0xC0140004 An attempt was made to access an array outside of its bounds STATUS_ACPI_INVALID_ARGUMENT 0xC0140005 A required argument was not specified STATUS_ACPI_FATAL 0xC0140006 A fatal error has occurred STATUS_ACPI_INVALID_SUPERNAME 0xC0140007 An invalid SuperName was specified STATUS_ACPI_INVALID_ARGTYPE 0xC0140008 An argument with an incorrect type was specified STATUS_ACPI_INVALID_OBJTYPE 0xC0140009 An object with an incorrect type was specified STATUS_ACPI_INVALID_TARGETTYPE 0xC014000A A target with an incorrect type was specified STATUS_ACPI_ADDRESS_NOT_MAPPED 0xC014000C An address failed to translate STATUS_ACPI_INVALID_EVENTTYPE 0xC014000D An incorrect event type was specified STATUS_ACPI_HANDLER_COLLISION 0xC014000E A handler for the target already exists STATUS_ACPI_INVALID_DATA 0xC014000F Invalid data for the target was specified STATUS_ACPI_INVALID_REGION 0xC0140010 An invalid region for the target was specified STATUS_ACPI_INVALID_ACCESS_SIZE 0xC0140011 An attempt was made to access a field outside of the defined range STATUS_ACPI_ACQUIRE_GLOBAL_LOCK 0xC0140012 The Global system lock could not be acquired STATUS_ACPI_ALREADY_INITIALIZED 0xC0140013 An attempt was made to reinitialize the ACPI subsystem STATUS_ACPI_NOT_INITIALIZED 0xC0140014 The ACPI subsystem has not been initialized STATUS_ACPI_INVALID_MUTEX_LEVEL 0xC0140015 An incorrect mutex was specified STATUS_ACPI_MUTEX_NOT_OWNED 0xC0140016 The mutex is not currently owned STATUS_ACPI_MUTEX_NOT_OWNER 0xC0140017 An attempt was made to access the mutex by a process that was not the owner STATUS_ACPI_RS_ACCESS 0xC0140018 An error occurred during an access to Region Space STATUS_ACPI_INVALID_TABLE 0xC0140019 An attempt was made to use an incorrect table STATUS_ACPI_REG_HANDLER_FAILED 0xC0140020 The registration of an ACPI event failed STATUS_CTX_CDM_CONNECT 0x400A0004 The Client Drive Mapping Service Has Connected on Terminal Connection. STATUS_CTX_CDM_DISCONNECT 0x400A0005 The Client Drive Mapping Service Has Disconnected on Terminal Connection. STATUS_CTX_CLOSE_PENDING 0xC00A0006 A close operation is pending on the Terminal Connection. STATUS_CTX_NO_OUTBUF 0xC00A0007 There are no free output buffers available. STATUS_CTX_MODEM_INF_NOT_FOUND 0xC00A0008 The MODEM.INF file was not found. STATUS_CTX_RESPONSE_ERROR 0xC00A000A The modem did not accept the command sent to it.Verify the configured modem name matches the attached modem. STATUS_CTX_MODEM_RESPONSE_BUSY 0xC00A000E Busy signal detected at remote site on callback. STATUS_CTX_MODEM_RESPONSE_VOICE 0xC00A000F Voice detected at remote site on callback. STATUS_CTX_TD_ERROR 0xC00A0010 Transport driver error STATUS_CTX_LICENSE_EXPIRED 0xC00A0014 The system license has expired. Your logon request is denied. STATUS_CTX_WINSTATION_NOT_FOUND 0xC00A0015 The specified session cannot be found. STATUS_CTX_WINSTATION_BUSY 0xC00A0017 The task you are trying to do can’t be completed because Remote Desktop Services is currently busy. Please try again in a few minutes. Other users should still be able to log on. STATUS_CTX_BAD_VIDEO_MODE 0xC00A0018 An attempt has been made to connect to a session whose video mode is not supported by the current client. STATUS_CTX_GRAPHICS_INVALID 0xC00A0022 The application attempted to enable DOS graphics mode.DOS graphics mode is not supported. STATUS_CTX_NOT_CONSOLE 0xC00A0024 The requested operation can be performed only on the system console.This is most often the result of a driver or system DLL requiring direct console access. STATUS_CTX_CLIENT_QUERY_TIMEOUT 0xC00A0026 The client failed to respond to the server connect message. STATUS_CTX_CONSOLE_DISCONNECT 0xC00A0027 Disconnecting the console session is not supported. STATUS_CTX_CONSOLE_CONNECT 0xC00A0028 Reconnecting a disconnected session to the console is not supported. STATUS_CTX_SHADOW_DENIED 0xC00A002A The request to control another session remotely was denied. STATUS_CTX_SHADOW_INVALID 0xC00A0030 The requested session cannot be controlled remotely.You cannot control your own session, a session that is trying to control your session,

a session that has no user logged on, nor control other sessions from the console.

STATUS_CTX_SHADOW_DISABLED 0xC00A0031 The requested session is not configured to allow remote control. STATUS_CTX_SHADOW_NOT_RUNNING 0xC00A0036 Remote control could not be terminated because the specified session is not currently being remotely controlled. STATUS_CTX_LOGON_DISABLED 0xC00A0037 Your interactive logon privilege has been disabled.Please contact your system administrator. STATUS_TS_INCOMPATIBLE_SESSIONS 0xC00A0039 The target session is incompatible with the current session. STATUS_TS_VIDEO_SUBSYSTEM_ERROR 0xC00A003A Windows can’t connect to your session because a problem occurred in the Windows video subsystem. Try connecting again later, or contact the server administrator for assistance. STATUS_PNP_BAD_MPS_TABLE 0xC0040035 A device is missing in the system BIOS MPS table. This device will not be used.Please contact your system vendor for system BIOS update. STATUS_PNP_TRANSLATION_FAILED 0xC0040036 A translator failed to translate resources. STATUS_IO_REISSUE_AS_CACHED 0xC0040039 Reissue the given operation as a cached IO operation STATUS_MUI_FILE_NOT_FOUND 0xC00B0001 The resource loader failed to find MUI file. STATUS_MUI_INVALID_FILE 0xC00B0002 The resource loader failed to load MUI file because the file fail to pass validation. STATUS_MUI_INVALID_RC_CONFIG 0xC00B0003 The RC Manifest is corrupted with garbage data or unsupported version or missing required item. STATUS_MUI_INVALID_LOCALE_NAME 0xC00B0004 The RC Manifest has invalid culture name. STATUS_MUI_FILE_NOT_LOADED 0xC00B0006 The resource loader cache doesn’t have loaded MUI entry. STATUS_RESOURCE_ENUM_USER_STOP 0xC00B0007 User stopped resource enumeration. STATUS_FLT_NO_HANDLER_DEFINED 0xC01C0001 A handler was not defined by the filter for this operation. STATUS_FLT_DISALLOW_FAST_IO 0xC01C0004 Internal error code used by the filter manager to determine if a fastio operation should be forced down the IRP path. Mini-filters should never return this value. STATUS_FLT_INVALID_NAME_REQUEST 0xC01C0005 An invalid name request was made. The name requested cannot be retrieved at this time. STATUS_FLT_NOT_INITIALIZED 0xC01C0007 The Filter Manager was not initialized when a filter tried to register. Make sure that the Filter Manager is getting loaded as a driver. STATUS_FLT_FILTER_NOT_READY 0xC01C0008 The filter is not ready for attachment to volumes because it has not finished initializing (FltStartFiltering has not been called). STATUS_FLT_INTERNAL_ERROR 0xC01C000A The Filter Manager had an internal error from which it cannot recover, therefore the operation has been failed. This is usually the result of a filter returning an invalid value from a pre-operation callback. STATUS_FLT_DELETING_OBJECT 0xC01C000B The object specified for this action is in the process of being deleted, therefore the action requested cannot be completed at this time. STATUS_FLT_DUPLICATE_ENTRY 0xC01C000D A duplicate handler definition has been provided for an operation. STATUS_FLT_CBDQ_DISABLED 0xC01C000E The callback data queue has been disabled. STATUS_FLT_DO_NOT_ATTACH 0xC01C000F Do not attach the filter to the volume at this time. STATUS_FLT_DO_NOT_DETACH 0xC01C0010 Do not detach the filter from the volume at this time. STATUS_FLT_FILTER_NOT_FOUND 0xC01C0013 The system could not find the filter specified. STATUS_FLT_VOLUME_NOT_FOUND 0xC01C0014 The system could not find the volume specified. STATUS_FLT_INSTANCE_NOT_FOUND 0xC01C0015 The system could not find the instance specified. STATUS_FLT_NAME_CACHE_MISS 0xC01C0018 The name requested was not found in Filter Manager’s name cache and could not be retrieved from the file system. STATUS_FLT_NO_DEVICE_OBJECT 0xC01C0019 The requested device object does not exist for the given volume. STATUS_FLT_ALREADY_ENLISTED 0xC01C001B The specified Transaction Context is already enlisted in a transaction STATUS_FLT_NO_WAITER_FOR_REPLY 0xC01C0020 No waiter is present for the filter’s reply to this message. STATUS_FLT_REGISTRATION_BUSY 0xC01C0023 The filesystem database resource is in use. Registration cannot complete at this time. STATUS_SXS_SECTION_NOT_FOUND 0xC0150001 The requested section is not present in the activation context. STATUS_SXS_CANT_GEN_ACTCTX 0xC0150002 Windows was not able to process the application binding information.Please refer to your System Event Log for further information. STATUS_SXS_ASSEMBLY_NOT_FOUND 0xC0150004 The referenced assembly is not installed on your system. STATUS_SXS_MANIFEST_PARSE_ERROR 0xC0150006 The manifest file contains one or more syntax errors. STATUS_SXS_KEY_NOT_FOUND 0xC0150008 The requested lookup key was not found in any active activation context. STATUS_SXS_VERSION_CONFLICT 0xC0150009 A component version required by the application conflicts with another component version already active. STATUS_SXS_WRONG_SECTION_TYPE 0xC015000A The type requested activation context section does not match the query API used. STATUS_SXS_ASSEMBLY_MISSING 0xC015000C The referenced assembly could not be found. STATUS_SXS_EARLY_DEACTIVATION 0xC015000F The activation context being deactivated is not the most recently activated one. STATUS_SXS_INVALID_DEACTIVATION 0xC0150010 The activation context being deactivated is not active for the current thread of execution. STATUS_SXS_CORRUPTION 0xC0150015 The application isolation metadata for this process or thread has become corrupt. STATUS_SXS_IDENTITY_PARSE_ERROR 0xC0150019 The identity string is malformed. This may be due to a trailing comma, more than two unnamed attributes, missing attribute name or missing attribute value. STATUS_SXS_FILE_HASH_MISMATCH 0xC015001B A component’s file does not match the verification information present in the component manifest. STATUS_SXS_IDENTITIES_DIFFERENT 0xC015001D The component identities are different. STATUS_XML_ENCODING_MISMATCH 0xC0150021 The character encoding in the XML declaration did not match the encoding used in the document. STATUS_SXS_MANIFEST_TOO_BIG 0xC0150022 The size of the manifest exceeds the maximum allowed. STATUS_GENERIC_COMMAND_FAILED 0xC0150026 A generic command executable returned a result that indicates failure. STATUS_SXS_FILE_HASH_MISSING 0xC0150027 A component is missing file verification information in its manifest. STATUS_CLUSTER_INVALID_NODE 0xC0130001 The cluster node is not valid. STATUS_CLUSTER_NODE_EXISTS 0xC0130002 The cluster node already exists. STATUS_CLUSTER_JOIN_IN_PROGRESS 0xC0130003 A node is in the process of joining the cluster. STATUS_CLUSTER_NODE_NOT_FOUND 0xC0130004 The cluster node was not found. STATUS_CLUSTER_NETWORK_EXISTS 0xC0130006 The cluster network already exists. STATUS_CLUSTER_INVALID_REQUEST 0xC013000A The cluster request is not valid for this object. STATUS_CLUSTER_NODE_DOWN 0xC013000C The cluster node is down. STATUS_CLUSTER_NODE_UNREACHABLE 0xC013000D The cluster node is not reachable. STATUS_CLUSTER_NODE_NOT_MEMBER 0xC013000E The cluster node is not a member of the cluster. STATUS_CLUSTER_INVALID_NETWORK 0xC0130010 The cluster network is not valid. STATUS_CLUSTER_NO_NET_ADAPTERS 0xC0130011 No network adapters are available. STATUS_CLUSTER_NODE_UP 0xC0130012 The cluster node is up. STATUS_CLUSTER_NODE_PAUSED 0xC0130013 The cluster node is paused. STATUS_CLUSTER_NODE_NOT_PAUSED 0xC0130014 The cluster node is not paused. STATUS_CLUSTER_POISONED 0xC0130017 The cluster node has been poisoned. STATUS_CLUSTER_NON_CSV_PATH 0xC0130018 The path does not belong to a cluster shared volume. STATUS_CLUSTER_CSV_REDIRECTED 0xC0130022 The operation has failed. CSVFS does not allow block i/o in redirected mode. STATUS_TRANSACTIONAL_CONFLICT 0xC0190001 The function attempted to use a name that is reserved for use by another transaction. STATUS_INVALID_TRANSACTION 0xC0190002 The transaction handle associated with this operation is not valid. STATUS_TRANSACTION_NOT_ACTIVE 0xC0190003 The requested operation was made in the context of a transaction that is no longer active. STATUS_TM_INITIALIZATION_FAILED 0xC0190004 The Transaction Manager was unable to be successfully initialized. Transacted operations are not supported. STATUS_RM_NOT_ACTIVE 0xC0190005 Transaction support within the specified resource manager is not started or was shut down due to an error. STATUS_RM_METADATA_CORRUPT 0xC0190006 The metadata of the RM has been corrupted. The RM will not function. STATUS_TRANSACTION_NOT_JOINED 0xC0190007 The resource manager has attempted to prepare a transaction that it has not successfully joined. STATUS_DIRECTORY_NOT_RM 0xC0190008 The specified directory does not contain a file system resource manager. STATUS_COULD_NOT_RESIZE_LOG 0x80190009 The log could not be set to the requested size. STATUS_LOG_RESIZE_INVALID_SIZE 0xC019000B The requested log size for the file system resource manager is invalid. STATUS_CRM_PROTOCOL_NOT_FOUND 0xC0190011 The requested propagation protocol was not registered as a CRM. STATUS_LOG_GROWTH_FAILED 0xC0190019 An attempt to create space in the transactional resource manager’s log failed. The failure status has been recorded in the event log. STATUS_OBJECT_NO_LONGER_EXISTS 0xC0190021 The object (file, stream, link) corresponding to the handle has been deleted by a transaction savepoint rollback. STATUS_HANDLE_NO_LONGER_VALID 0xC0190028 The handle has been invalidated by a transaction. The most likely cause is the presence of memory mapping on a file or an open handle when the transaction ended or rolled back to savepoint. STATUS_NO_TXF_METADATA 0x80190029 There is no transaction metadata on the file. STATUS_LOG_CORRUPTION_DETECTED 0xC0190030 The log data is corrupt. STATUS_RM_DISCONNECTED 0xC0190032 The transaction outcome is unavailable because the resource manager responsible for it has disconnected. STATUS_ENLISTMENT_NOT_SUPERIOR 0xC0190033 The request was rejected because the enlistment in question is not a superior enlistment. STATUS_RECOVERY_NOT_NEEDED 0x40190034 The transactional resource manager is already consistent. Recovery is not needed. STATUS_RM_ALREADY_STARTED 0x40190035 The transactional resource manager has already been started. STATUS_CANT_CROSS_RM_BOUNDARY 0xC0190038 The operation would involve a single file with two transactional resource managers and is therefore not allowed. STATUS_TXF_DIR_NOT_EMPTY 0xC0190039 The $Txf directory must be empty for this operation to succeed. STATUS_TM_VOLATILE 0xC019003B The operation could not be completed because the transaction manager does not have a log. STATUS_ROLLBACK_TIMER_EXPIRED 0xC019003C A rollback could not be scheduled because a previously scheduled rollback has already executed or been queued for execution. STATUS_TXF_ATTRIBUTE_CORRUPT 0xC019003D The transactional metadata attribute on the file or directory hs is corrupt and unreadable. STATUS_TRANSACTIONS_NOT_FROZEN 0xC0190045 The request to thaw frozen transactions was ignored because transactions had not previously been frozen. STATUS_NOT_SNAPSHOT_VOLUME 0xC0190047 The target volume is not a snapshot volume. This operation is only valid on a volume mounted as a snapshot. STATUS_TM_IDENTITY_MISMATCH 0xC019004A The call to create a TransactionManager object failed because the Tm Identity stored in the logfile does not match the Tm Identity that was passed in as an argument. STATUS_FLOATED_SECTION 0xC019004B I/O was attempted on a section object that has been floated as a result of a transaction ending. There is no valid data. STATUS_TRANSACTION_NOT_FOUND 0xC019004E The specified Transaction was unable to be opened, because it was not found. STATUS_ENLISTMENT_NOT_FOUND 0xC0190050 The specified Enlistment was unable to be opened, because it was not found. STATUS_TRANSACTION_NOT_ROOT 0xC0190054 The call to create a superior Enlistment on this Transaction object could not be completed, because the Transaction object specified for the enlistment is a subordinate branch of the Transaction. Only the root of the Transaction can be enlisted on as a superior. STATUS_TRANSACTION_NO_SUPERIOR 0xC019005F The transaction does not have a superior enlistment. STATUS_EXPIRED_HANDLE 0xC0190060 The handle is no longer properly associated with its transaction. It may have been opened in a transactional resource manager that was subsequently forced to restart. Please close the handle and open a new one. STATUS_TRANSACTION_NOT_ENLISTED 0xC0190061 The specified operation could not be performed because the resource manager is not enlisted in the transaction. STATUS_LOG_SECTOR_INVALID 0xC01A0001 Log service found an invalid log sector. STATUS_LOG_SECTOR_REMAPPED 0xC01A0003 Log service encountered a remapped log sector. STATUS_LOG_BLOCK_INCOMPLETE 0xC01A0004 Log service encountered a partial or incomplete log block. STATUS_LOG_INVALID_RANGE 0xC01A0005 Log service encountered an attempt access data outside the active log range. STATUS_LOG_BLOCKS_EXHAUSTED 0xC01A0006 Log service user log marshalling buffers are exhausted. STATUS_LOG_READ_CONTEXT_INVALID 0xC01A0007 Log service encountered an attempt read from a marshalling area with an invalid read context. STATUS_LOG_RESTART_INVALID 0xC01A0008 Log service encountered an invalid log restart area. STATUS_LOG_BLOCK_VERSION 0xC01A0009 Log service encountered an invalid log block version. STATUS_LOG_BLOCK_INVALID 0xC01A000A Log service encountered an invalid log block. STATUS_LOG_READ_MODE_INVALID 0xC01A000B Log service encountered an attempt to read the log with an invalid read mode. STATUS_LOG_NO_RESTART 0x401A000C Log service encountered a log stream with no restart area. STATUS_LOG_METADATA_CORRUPT 0xC01A000D Log service encountered a corrupted metadata file. STATUS_LOG_METADATA_INVALID 0xC01A000E Log service encountered a metadata file that could not be created by the log file system. STATUS_LOG_RESERVATION_INVALID 0xC01A0010 Log service encountered an attempt to erroneously allocate or dispose reservation space. STATUS_LOG_CANT_DELETE 0xC01A0011 Log service cannot delete log file or file system container. STATUS_LOG_START_OF_LOG 0xC01A0013 Log service has attempted to read or write backwards past the start of the log. STATUS_LOG_POLICY_NOT_INSTALLED 0xC01A0015 Log policy in question was not installed at the time of the request. STATUS_LOG_POLICY_INVALID 0xC01A0016 The installed set of policies on the log is invalid. STATUS_LOG_POLICY_CONFLICT 0xC01A0017 A policy on the log in question prevented the operation from completing. STATUS_LOG_PINNED_ARCHIVE_TAIL 0xC01A0018 Log space cannot be reclaimed because the log is pinned by the archive tail. STATUS_LOG_RECORD_NONEXISTENT 0xC01A0019 Log record is not a record in the log file. STATUS_LOG_TAIL_INVALID 0xC01A001C A new or existing archive tail or base of the active log is invalid. STATUS_LOG_FULL 0xC01A001D Log space is exhausted. STATUS_LOG_MULTIPLEXED 0xC01A001E Log is multiplexed, no direct writes to the physical log is allowed. STATUS_LOG_DEDICATED 0xC01A001F The operation failed because the log is a dedicated log. STATUS_LOG_ARCHIVE_IN_PROGRESS 0xC01A0021 Log archival is in progress. STATUS_LOG_EPHEMERAL 0xC01A0022 The operation requires a non-ephemeral log, but the log is ephemeral. STATUS_LOG_STATE_INVALID 0xC01A002B Log service is not in the correct state to perform a requested action. STATUS_LOG_PINNED 0xC01A002C Log space cannot be reclaimed because the log is pinned. STATUS_LOG_PINNED_RESERVATION 0xC01A0030 The log is pinned due to reservation consuming most of the log space. Free some reserved records to make space available. STATUS_MONITOR_NO_DESCRIPTOR 0xC01D0001 Monitor descriptor could not be obtained. STATUS_GRAPHICS_PRESENT_DENIED 0xC01E0007 Not able to present due to denial of desktop access STATUS_GRAPHICS_DRIVER_MISMATCH 0xC01E0009 The kernel driver detected a version mismatch between it and the user mode driver. STATUS_GRAPHICS_NO_VIDEO_MEMORY 0xC01E0100 Not enough video memory available to complete the operation. STATUS_GRAPHICS_ALLOCATION_BUSY 0xC01E0102 The allocation is currently busy. STATUS_GRAPHICS_TRY_AGAIN_LATER 0xC01E0104 A problem couldn’t be solved due to some currently existing condition. The problem should be tried again later. STATUS_GRAPHICS_TRY_AGAIN_NOW 0xC01E0105 A problem couldn’t be solved due to some currently existing condition. The problem should be tried again immediately. STATUS_GRAPHICS_INVALID_VIDPN 0xC01E0303 Specified VidPN handle is invalid. STATUS_GRAPHICS_MODE_NOT_PINNED 0x401E0307 No mode is pinned on the specified VidPN source/target. STATUS_GRAPHICS_STALE_MODESET 0xC01E0320 Specified mode set is stale. Please reacquire the new mode set. STATUS_GRAPHICS_NO_VIDPNMGR 0xC01E0335 Display adapter in question does not have an associated VidPN manager. STATUS_GRAPHICS_NO_ACTIVE_VIDPN 0xC01E0336 VidPN manager of the display adapter in question does not have an active VidPN. STATUS_GRAPHICS_INVALID_STRIDE 0xC01E033C Specified stride is invalid. STATUS_GRAPHICS_START_DEFERRED 0x401E043A Starting the adapter has been deferred temporarily. STATUS_GRAPHICS_PVP_HFS_FAILED 0xC01E0511 The function failed because the display adapter’s Hardware Functionality Scan failed to validate the graphics hardware. STATUS_GRAPHICS_OPM_INVALID_SRM 0xC01E0512 The HDCP System Renewability Message passed to this function did not comply with section 5 of the HDCP 1.1 specification. STATUS_GRAPHICS_INVALID_POINTER 0xC01E05E4 The function failed because an invalid pointer parameter was passed to it. A pointer parameter is invalid if it is NULL, it points to an invalid address, it points to a kernel mode address or it is not correctly aligned. STATUS_GRAPHICS_INTERNAL_ERROR 0xC01E05E7 An internal error caused an operation to fail. STATUS_FVE_LOCKED_VOLUME 0xC0210000 This volume is locked by BitLocker Drive Encryption. STATUS_FVE_NOT_ENCRYPTED 0xC0210001 The volume is not encrypted, no key is available. STATUS_FVE_BAD_INFORMATION 0xC0210002 The control block for the encrypted volume is not valid. STATUS_FVE_TOO_SMALL 0xC0210003 The volume cannot be encrypted because it does not have enough free space. STATUS_FVE_FAILED_WRONG_FS 0xC0210004 The volume cannot be encrypted because the file system is not supported. STATUS_FVE_BAD_PARTITION_SIZE 0xC0210005 The file system size is larger than the partition size in the partition table. STATUS_FVE_FS_NOT_EXTENDED 0xC0210006 The file system does not extend to the end of the volume. STATUS_FVE_FS_MOUNTED 0xC0210007 This operation cannot be performed while a file system is mounted on the volume. STATUS_FVE_NO_LICENSE 0xC0210008 BitLocker Drive Encryption is not included with this version of Windows. STATUS_FVE_ACTION_NOT_ALLOWED 0xC0210009 Requested action not allowed in the current volume state. STATUS_FVE_BAD_DATA 0xC021000A Data supplied is malformed. STATUS_FVE_VOLUME_NOT_BOUND 0xC021000B The volume is not bound to the system. STATUS_FVE_NOT_DATA_VOLUME 0xC021000C That volume is not a data volume. STATUS_FVE_CONV_READ_ERROR 0xC021000D A read operation failed while converting the volume. STATUS_FVE_CONV_WRITE_ERROR 0xC021000E A write operation failed while converting the volume. STATUS_FVE_OVERLAPPED_UPDATE 0xC021000F The control block for the encrypted volume was updated by another thread. Try again. STATUS_FVE_FAILED_SECTOR_SIZE 0xC0210010 The encryption algorithm does not support the sector size of that volume. STATUS_FVE_NOT_OS_VOLUME 0xC0210012 That volume is not the OS volume. STATUS_FVE_KEYFILE_NOT_FOUND 0xC0210013 The BitLocker startup key or recovery password could not be read from external media. STATUS_FVE_KEYFILE_INVALID 0xC0210014 The BitLocker startup key or recovery password file is corrupt or invalid. STATUS_FVE_KEYFILE_NO_VMK 0xC0210015 The BitLocker encryption key could not be obtained from the startup key or recovery password. STATUS_FVE_TPM_DISABLED 0xC0210016 The Trusted Platform Module (TPM) is disabled. STATUS_FVE_TPM_INVALID_PCR 0xC0210018 The system boot information changed or the Trusted Platform Module (TPM) locked out access to BitLocker encryption keys until the computer is restarted. STATUS_FVE_TPM_NO_VMK 0xC0210019 The BitLocker encryption key could not be obtained from the Trusted Platform Module (TPM). STATUS_FVE_PIN_INVALID 0xC021001A The BitLocker encryption key could not be obtained from the Trusted Platform Module (TPM) and PIN. STATUS_FVE_AUTH_INVALID_CONFIG 0xC021001C The Boot Configuration Data (BCD) settings are not supported or have changed since BitLocker was enabled. STATUS_FVE_DEBUGGER_ENABLED 0xC021001D Boot debugging is enabled. Run bcdedit to turn it off. STATUS_FVE_DRY_RUN_FAILED 0xC021001E The BitLocker encryption key could not be obtained. STATUS_FVE_BAD_METADATA_POINTER 0xC021001F The metadata disk region pointer is incorrect. STATUS_FVE_OLD_METADATA_COPY 0xC0210020 The backup copy of the metadata is out of date. STATUS_FVE_REBOOT_REQUIRED 0xC0210021 No action was taken as a system reboot is required. STATUS_FVE_RAW_ACCESS 0xC0210022 No action was taken as BitLocker Drive Encryption is in RAW access mode. STATUS_FVE_RAW_BLOCKED 0xC0210023 BitLocker Drive Encryption cannot enter raw access mode for this volume. STATUS_FVE_MOR_FAILED 0xC0210025 The system firmware failed to enable clearing of system memory on reboot. STATUS_FVE_NO_FEATURE_LICENSE 0xC0210026 This feature of BitLocker Drive Encryption is not included with this version of Windows. STATUS_FVE_CONV_RECOVERY_FAILED 0xC0210028 Bitlocker Drive Encryption failed to recover from aborted conversion. This could be due to either all conversion logs being corrupted or the media being write-protected. STATUS_FVE_INVALID_DATUM_TYPE 0xC021002A The management information stored on the drive contained an unknown type. If you are using an old version of Windows, try accessing the drive from the latest version. STATUS_FVE_VOLUME_TOO_SMALL 0xC0210030 The drive is too small to be protected using BitLocker Drive Encryption. STATUS_FVE_ENH_PIN_INVALID 0xC0210031 The BitLocker encryption key could not be obtained from the Trusted Platform Module (TPM) and enhanced PIN. Try using a PIN containing only numerals. STATUS_FVE_SECUREBOOT_DISABLED 0xC0210039 Secure Boot has been disabled. Either Secure Boot must be re-enabled, or BitLocker must be suspended for Windows to start normally. STATUS_FVE_DEVICE_LOCKEDOUT 0xC021003B Device Lock has been triggered due to too many incorrect password attempts. STATUS_FWP_CALLOUT_NOT_FOUND 0xC0220001 The callout does not exist. STATUS_FWP_CONDITION_NOT_FOUND 0xC0220002 The filter condition does not exist. STATUS_FWP_FILTER_NOT_FOUND 0xC0220003 The filter does not exist. STATUS_FWP_LAYER_NOT_FOUND 0xC0220004 The layer does not exist. STATUS_FWP_PROVIDER_NOT_FOUND 0xC0220005 The provider does not exist. STATUS_FWP_SUBLAYER_NOT_FOUND 0xC0220007 The sublayer does not exist. STATUS_FWP_NOT_FOUND 0xC0220008 The object does not exist. STATUS_FWP_ALREADY_EXISTS 0xC0220009 An object with that GUID or LUID already exists. STATUS_FWP_IN_USE 0xC022000A The object is referenced by other objects so cannot be deleted. STATUS_FWP_WRONG_SESSION 0xC022000C The call was made from the wrong session so cannot be completed. STATUS_FWP_NO_TXN_IN_PROGRESS 0xC022000D The call must be made from within an explicit transaction. STATUS_FWP_TXN_IN_PROGRESS 0xC022000E The call is not allowed from within an explicit transaction. STATUS_FWP_TXN_ABORTED 0xC022000F The explicit transaction has been forcibly cancelled. STATUS_FWP_SESSION_ABORTED 0xC0220010 The session has been cancelled. STATUS_FWP_INCOMPATIBLE_TXN 0xC0220011 The call is not allowed from within a read-only transaction. STATUS_FWP_TIMEOUT 0xC0220012 The call timed out while waiting to acquire the transaction lock. STATUS_FWP_NET_EVENTS_DISABLED 0xC0220013 Collection of network diagnostic events is disabled. STATUS_FWP_INCOMPATIBLE_LAYER 0xC0220014 The operation is not supported by the specified layer. STATUS_FWP_KM_CLIENTS_ONLY 0xC0220015 The call is allowed for kernel-mode callers only. STATUS_FWP_LIFETIME_MISMATCH 0xC0220016 The call tried to associate two objects with incompatible lifetimes. STATUS_FWP_BUILTIN_OBJECT 0xC0220017 The object is built in so cannot be deleted. STATUS_FWP_TOO_MANY_CALLOUTS 0xC0220018 The maximum number of callouts has been reached. STATUS_FWP_NOTIFICATION_DROPPED 0xC0220019 A notification could not be delivered because a message queue is at its maximum capacity. STATUS_FWP_TRAFFIC_MISMATCH 0xC022001A The traffic parameters do not match those for the security association context. STATUS_FWP_NULL_POINTER 0xC022001C A required pointer is null. STATUS_FWP_INVALID_ENUMERATOR 0xC022001D An enumerator is not valid. STATUS_FWP_INVALID_FLAGS 0xC022001E The flags field contains an invalid value. STATUS_FWP_INVALID_NET_MASK 0xC022001F A network mask is not valid. STATUS_FWP_INVALID_RANGE 0xC0220020 An FWP_RANGE is not valid. STATUS_FWP_INVALID_INTERVAL 0xC0220021 The time interval is not valid. STATUS_FWP_ZERO_LENGTH_ARRAY 0xC0220022 An array that must contain at least one element is zero length. STATUS_FWP_NULL_DISPLAY_NAME 0xC0220023 The displayData.name field cannot be null. STATUS_FWP_INVALID_ACTION_TYPE 0xC0220024 The action type is not one of the allowed action types for a filter. STATUS_FWP_INVALID_WEIGHT 0xC0220025 The filter weight is not valid. STATUS_FWP_MATCH_TYPE_MISMATCH 0xC0220026 A filter condition contains a match type that is not compatible with the operands. STATUS_FWP_TYPE_MISMATCH 0xC0220027 An FWP_VALUE or FWPM_CONDITION_VALUE is of the wrong type. STATUS_FWP_OUT_OF_BOUNDS 0xC0220028 An integer value is outside the allowed range. STATUS_FWP_RESERVED 0xC0220029 A reserved field is non-zero. STATUS_FWP_DUPLICATE_CONDITION 0xC022002A A filter cannot contain multiple conditions operating on a single field. STATUS_FWP_DUPLICATE_KEYMOD 0xC022002B A policy cannot contain the same keying module more than once. STATUS_FWP_EM_NOT_SUPPORTED 0xC0220032 An IKE policy cannot contain an Extended Mode policy. STATUS_FWP_NEVER_MATCH 0xC0220033 The enumeration template or subscription will never match any objects. STATUS_FWP_INVALID_PARAMETER 0xC0220035 The parameter is incorrect. STATUS_FWP_TOO_MANY_SUBLAYERS 0xC0220036 The maximum number of sublayers has been reached. STATUS_FWP_L2_DRIVER_NOT_READY 0xC022003E The WFP MAC Layers are not ready. STATUS_FWP_CONNECTIONS_DISABLED 0xC0220041 The BFE IPsec Connection Tracking is disabled. STATUS_FWP_INVALID_DNS_NAME 0xC0220042 The DNS name is invalid. STATUS_FWP_STILL_ON 0xC0220043 The engine option is still enabled due to other configuration settings. STATUS_FWP_IKEEXT_NOT_RUNNING 0xC0220044 The IKEEXT service is not running. This service only runs when there is IPsec policy applied to the machine. STATUS_FWP_TCPIP_NOT_READY 0xC0220100 The TCP/IP stack is not ready. STATUS_FWP_INJECT_HANDLE_STALE 0xC0220102 The injection handle is stale. STATUS_FWP_CANNOT_PEND 0xC0220103 The classify cannot be pended. STATUS_FWP_DROP_NOICMP 0xC0220104 The packet should be dropped, no ICMP should be sent. STATUS_NDIS_CLOSING 0xC0230002 The binding to the network interface is being closed. STATUS_NDIS_BAD_VERSION 0xC0230004 An invalid version was specified. STATUS_NDIS_BAD_CHARACTERISTICS 0xC0230005 An invalid characteristics table was used. STATUS_NDIS_ADAPTER_NOT_FOUND 0xC0230006 Failed to find the network interface or network interface is not ready. STATUS_NDIS_OPEN_FAILED 0xC0230007 Failed to open the network interface. STATUS_NDIS_DEVICE_FAILED 0xC0230008 Network interface has encountered an internal unrecoverable failure. STATUS_NDIS_MULTICAST_FULL 0xC0230009 The multicast list on the network interface is full. STATUS_NDIS_MULTICAST_EXISTS 0xC023000A An attempt was made to add a duplicate multicast address to the list. STATUS_NDIS_MULTICAST_NOT_FOUND 0xC023000B At attempt was made to remove a multicast address that was never added. STATUS_NDIS_REQUEST_ABORTED 0xC023000C Netowork interface aborted the request. STATUS_NDIS_RESET_IN_PROGRESS 0xC023000D Network interface can not process the request because it is being reset. STATUS_NDIS_NOT_SUPPORTED 0xC02300BB Netword interface does not support this request. STATUS_NDIS_INVALID_PACKET 0xC023000F An attempt was made to send an invalid packet on a network interface. STATUS_NDIS_ADAPTER_NOT_READY 0xC0230011 Network interface is not ready to complete this operation. STATUS_NDIS_INVALID_LENGTH 0xC0230014 The length of the buffer submitted for this operation is not valid. STATUS_NDIS_INVALID_DATA 0xC0230015 The data used for this operation is not valid. STATUS_NDIS_BUFFER_TOO_SHORT 0xC0230016 The length of buffer submitted for this operation is too small. STATUS_NDIS_INVALID_OID 0xC0230017 Network interface does not support this OID (Object Identifier) STATUS_NDIS_ADAPTER_REMOVED 0xC0230018 The network interface has been removed. STATUS_NDIS_UNSUPPORTED_MEDIA 0xC0230019 Network interface does not support this media type. STATUS_NDIS_FILE_NOT_FOUND 0xC023001B An attempt was made to map a file that can not be found. STATUS_NDIS_ERROR_READING_FILE 0xC023001C An error occurred while NDIS tried to map the file. STATUS_NDIS_ALREADY_MAPPED 0xC023001D An attempt was made to map a file that is alreay mapped. STATUS_NDIS_RESOURCE_CONFLICT 0xC023001E An attempt to allocate a hardware resource failed because the resource is used by another component. STATUS_NDIS_MEDIA_DISCONNECTED 0xC023001F The I/O operation failed because network media is disconnected or wireless access point is out of range. STATUS_NDIS_INVALID_ADDRESS 0xC0230022 The network address used in the request is invalid. STATUS_NDIS_PAUSED 0xC023002A The offload operation on the network interface has been paused. STATUS_NDIS_INTERFACE_NOT_FOUND 0xC023002B Network interface was not found. STATUS_NDIS_INVALID_PORT 0xC023002D The specified port does not exist on this network interface. STATUS_NDIS_INVALID_PORT_STATE 0xC023002E The current state of the specified port on this network interface does not support the requested operation. STATUS_NDIS_LOW_POWER_STATE 0xC023002F The miniport adapter is in lower power state. STATUS_NDIS_REINIT_REQUIRED 0xC0230030 This operation requires the miniport adapter to be reinitialized. STATUS_NDIS_DOT11_MEDIA_IN_USE 0xC0232001 The wireless local area network interface is busy and can not perform the requested operation. STATUS_NDIS_INDICATION_REQUIRED 0x40230001 The request will be completed later by NDIS status indication. STATUS_NDIS_OFFLOAD_POLICY 0xC023100F The TCP connection is not offloadable because of a local policy setting. STATUS_TPM_ERROR_MASK 0xC0290000 This is an error mask to convert TPM hardware errors to win errors. STATUS_TPM_AUTHFAIL 0xC0290001 Authentication failed. STATUS_TPM_BADINDEX 0xC0290002 The index to a PCR, DIR or other register is incorrect. STATUS_TPM_BAD_PARAMETER 0xC0290003 One or more parameter is bad. STATUS_TPM_AUDITFAILURE 0xC0290004 An operation completed successfully but the auditing of that operation failed. STATUS_TPM_CLEAR_DISABLED 0xC0290005 The clear disable flag is set and all clear operations now require physical access. STATUS_TPM_DEACTIVATED 0xC0290006 Activate the Trusted Platform Module (TPM). STATUS_TPM_DISABLED 0xC0290007 Enable the Trusted Platform Module (TPM). STATUS_TPM_DISABLED_CMD 0xC0290008 The target command has been disabled. STATUS_TPM_FAIL 0xC0290009 The operation failed. STATUS_TPM_BAD_ORDINAL 0xC029000A The ordinal was unknown or inconsistent. STATUS_TPM_INSTALL_DISABLED 0xC029000B The ability to install an owner is disabled. STATUS_TPM_INVALID_KEYHANDLE 0xC029000C The key handle cannot be interpreted. STATUS_TPM_KEYNOTFOUND 0xC029000D The key handle points to an invalid key. STATUS_TPM_INAPPROPRIATE_ENC 0xC029000E Unacceptable encryption scheme. STATUS_TPM_MIGRATEFAIL 0xC029000F Migration authorization failed. STATUS_TPM_INVALID_PCR_INFO 0xC0290010 PCR information could not be interpreted. STATUS_TPM_NOSPACE 0xC0290011 No room to load key. STATUS_TPM_NOSRK 0xC0290012 There is no Storage Root Key (SRK) set. STATUS_TPM_NOTSEALED_BLOB 0xC0290013 An encrypted blob is invalid or was not created by this TPM. STATUS_TPM_OWNER_SET 0xC0290014 The Trusted Platform Module (TPM) already has an owner. STATUS_TPM_RESOURCES 0xC0290015 The TPM has insufficient internal resources to perform the requested action. STATUS_TPM_SHORTRANDOM 0xC0290016 A random string was too short. STATUS_TPM_SIZE 0xC0290017 The TPM does not have the space to perform the operation. STATUS_TPM_WRONGPCRVAL 0xC0290018 The named PCR value does not match the current PCR value. STATUS_TPM_BAD_PARAM_SIZE 0xC0290019 The paramSize argument to the command has the incorrect value . STATUS_TPM_SHA_THREAD 0xC029001A There is no existing SHA-1 thread. STATUS_TPM_SHA_ERROR 0xC029001B The calculation is unable to proceed because the existing SHA-1 thread has already encountered an error. STATUS_TPM_FAILEDSELFTEST 0xC029001C The TPM hardware device reported a failure during its internal self test. Try restarting the computer to resolve the problem. If the problem continues, you might need to replace your TPM hardware or motherboard. STATUS_TPM_AUTh3FAIL 0xC029001D The authorization for the second key in a 2 key function failed authorization. STATUS_TPM_BADTAG 0xC029001E The tag value sent to for a command is invalid. STATUS_TPM_IOERROR 0xC029001F An IO error occurred transmitting information to the TPM. STATUS_TPM_ENCRYPT_ERROR 0xC0290020 The encryption process had a problem. STATUS_TPM_DECRYPT_ERROR 0xC0290021 The decryption process did not complete. STATUS_TPM_INVALID_AUTHHANDLE 0xC0290022 An invalid handle was used. STATUS_TPM_NO_ENDORSEMENT 0xC0290023 The TPM does not have an Endorsement Key (EK) installed. STATUS_TPM_INVALID_KEYUSAGE 0xC0290024 The usage of a key is not allowed. STATUS_TPM_WRONG_ENTITYTYPE 0xC0290025 The submitted entity type is not allowed. STATUS_TPM_INVALID_POSTINIT 0xC0290026 The command was received in the wrong sequence relative to TPM_Init and a subsequent TPM_Startup. STATUS_TPM_INAPPROPRIATE_SIG 0xC0290027 Signed data cannot include additional DER information. STATUS_TPM_BAD_KEY_PROPERTY 0xC0290028 The key properties in TPM_KEY_PARMs are not supported by this TPM. STATUS_TPM_BAD_MIGRATION 0xC0290029 The migration properties of this key are incorrect. STATUS_TPM_BAD_SCHEME 0xC029002A The signature or encryption scheme for this key is incorrect or not permitted in this situation. STATUS_TPM_BAD_DATASIZE 0xC029002B The size of the data (or blob) parameter is bad or inconsistent with the referenced key. STATUS_TPM_BAD_MODE 0xC029002C A mode parameter is bad, such as capArea or subCapArea for TPM_GetCapability, phsicalPresence parameter for TPM_PhysicalPresence, or migrationType for TPM_CreateMigrationBlob. STATUS_TPM_BAD_PRESENCE 0xC029002D Either the physicalPresence or physicalPresenceLock bits have the wrong value. STATUS_TPM_BAD_VERSION 0xC029002E The TPM cannot perform this version of the capability. STATUS_TPM_NO_WRAP_TRANSPORT 0xC029002F The TPM does not allow for wrapped transport sessions. STATUS_TPM_AUDITFAIL_SUCCESSFUL 0xC0290031 TPM audit construction failed and the underlying command was returning success. STATUS_TPM_NOTRESETABLE 0xC0290032 Attempt to reset a PCR register that does not have the resettable attribute. STATUS_TPM_NOTLOCAL 0xC0290033 Attempt to reset a PCR register that requires locality and locality modifier not part of command transport. STATUS_TPM_BAD_TYPE 0xC0290034 Make identity blob not properly typed. STATUS_TPM_INVALID_RESOURCE 0xC0290035 When saving context identified resource type does not match actual resource. STATUS_TPM_NOTFIPS 0xC0290036 The TPM is attempting to execute a command only available when in FIPS mode. STATUS_TPM_INVALID_FAMILY 0xC0290037 The command is attempting to use an invalid family ID. STATUS_TPM_NO_NV_PERMISSION 0xC0290038 The permission to manipulate the NV storage is not available. STATUS_TPM_REQUIRES_SIGN 0xC0290039 The operation requires a signed command. STATUS_TPM_KEY_NOTSUPPORTED 0xC029003A Wrong operation to load an NV key. STATUS_TPM_AUTH_CONFLICT 0xC029003B NV_LoadKey blob requires both owner and blob authorization. STATUS_TPM_AREA_LOCKED 0xC029003C The NV area is locked and not writtable. STATUS_TPM_BAD_LOCALITY 0xC029003D The locality is incorrect for the attempted operation. STATUS_TPM_READ_ONLY 0xC029003E The NV area is read only and can’t be written to. STATUS_TPM_PER_NOWRITE 0xC029003F There is no protection on the write to the NV area. STATUS_TPM_FAMILYCOUNT 0xC0290040 The family count value does not match. STATUS_TPM_WRITE_LOCKED 0xC0290041 The NV area has already been written to. STATUS_TPM_BAD_ATTRIBUTES 0xC0290042 The NV area attributes conflict. STATUS_TPM_INVALID_STRUCTURE 0xC0290043 The structure tag and version are invalid or inconsistent. STATUS_TPM_KEY_OWNER_CONTROL 0xC0290044 The key is under control of the TPM Owner and can only be evicted by the TPM Owner. STATUS_TPM_BAD_COUNTER 0xC0290045 The counter handle is incorrect. STATUS_TPM_NOT_FULLWRITE 0xC0290046 The write is not a complete write of the area. STATUS_TPM_CONTEXT_GAP 0xC0290047 The gap between saved context counts is too large. STATUS_TPM_MAXNVWRITES 0xC0290048 The maximum number of NV writes without an owner has been exceeded. STATUS_TPM_NOOPERATOR 0xC0290049 No operator AuthData value is set. STATUS_TPM_RESOURCEMISSING 0xC029004A The resource pointed to by context is not loaded. STATUS_TPM_DELEGATE_LOCK 0xC029004B The delegate administration is locked. STATUS_TPM_DELEGATE_FAMILY 0xC029004C Attempt to manage a family other then the delegated family. STATUS_TPM_DELEGATE_ADMIN 0xC029004D Delegation table management not enabled. STATUS_TPM_OWNER_CONTROL 0xC029004F Attempt to context save a owner evict controlled key. STATUS_TPM_DAA_RESOURCES 0xC0290050 The DAA command has no resources availble to execute the command. STATUS_TPM_DAA_INPUT_DATA0 0xC0290051 The consistency check on DAA parameter inputData0 has failed. STATUS_TPM_DAA_INPUT_DATA1 0xC0290052 The consistency check on DAA parameter inputData1 has failed. STATUS_TPM_DAA_ISSUER_SETTINGS 0xC0290053 The consistency check on DAA_issuerSettings has failed. STATUS_TPM_DAA_TPM_SETTINGS 0xC0290054 The consistency check on DAA_tpmSpecific has failed. STATUS_TPM_DAA_STAGE 0xC0290055 The atomic process indicated by the submitted DAA command is not the expected process. STATUS_TPM_DAA_ISSUER_VALIDITY 0xC0290056 The issuer’s validity check has detected an inconsistency. STATUS_TPM_DAA_WRONG_W 0xC0290057 The consistency check on w has failed. STATUS_TPM_BAD_HANDLE 0xC0290058 The handle is incorrect. STATUS_TPM_BAD_DELEGATE 0xC0290059 Delegation is not correct. STATUS_TPM_BADCONTEXT 0xC029005A The context blob is invalid. STATUS_TPM_TOOMANYCONTEXTS 0xC029005B Too many contexts held by the TPM. STATUS_TPM_MA_TICKET_SIGNATURE 0xC029005C Migration authority signature validation failure. STATUS_TPM_MA_DESTINATION 0xC029005D Migration destination not authenticated. STATUS_TPM_MA_SOURCE 0xC029005E Migration source incorrect. STATUS_TPM_MA_AUTHORITY 0xC029005F Incorrect migration authority. STATUS_TPM_PERMANENTEK 0xC0290061 Attempt to revoke the EK and the EK is not revocable. STATUS_TPM_BAD_SIGNATURE 0xC0290062 Bad signature of CMK ticket. STATUS_TPM_NOCONTEXTSPACE 0xC0290063 There is no room in the context list for additional contexts. STATUS_TPM_COMMAND_BLOCKED 0xC0290400 The command was blocked. STATUS_TPM_INVALID_HANDLE 0xC0290401 The specified handle was not found. STATUS_TPM_DUPLICATE_VHANDLE 0xC0290402 The TPM returned a duplicate handle and the command needs to be resubmitted. STATUS_TPM_RETRY 0xC0290800 The TPM is too busy to respond to the command immediately, but the command could be resubmitted at a later time. STATUS_TPM_NEEDS_SELFTEST 0xC0290801 SelfTestFull has not been run. STATUS_TPM_DOING_SELFTEST 0xC0290802 The TPM is currently executing a full selftest. STATUS_TPM_DEFEND_LOCK_RUNNING 0xC0290803 The TPM is defending against dictionary attacks and is in a time-out period. STATUS_TPM_COMMAND_CANCELED 0xC0291001 The command was cancelled. STATUS_TPM_TOO_MANY_CONTEXTS 0xC0291002 A new TPM context could not be created because there are too many open contexts. STATUS_TPM_NOT_FOUND 0xC0291003 TPM driver is not compatible with the version of TPM found on the system. STATUS_TPM_ACCESS_DENIED 0xC0291004 The caller does not have the appropriate rights to perform the requested operation. STATUS_TPM_INSUFFICIENT_BUFFER 0xC0291005 The caller does not have the appropriate rights to perform the requested operation. STATUS_PCP_ERROR_MASK 0xC0292000 This is an error mask to convert Platform Crypto Provider errors to win errors. STATUS_PCP_DEVICE_NOT_READY 0xC0292001 The Platform Crypto Device is currently not ready. It needs to be fully provisioned to be operational. STATUS_PCP_INVALID_HANDLE 0xC0292002 The handle provided to the Platform Crypto Provider is invalid. STATUS_PCP_INVALID_PARAMETER 0xC0292003 A parameter provided to the Platform Crypto Provider is invalid. STATUS_PCP_FLAG_NOT_SUPPORTED 0xC0292004 A provided flag to the Platform Crypto Provider is not supported. STATUS_PCP_NOT_SUPPORTED 0xC0292005 The requested operation is not supported by this Platform Crypto Provider. STATUS_PCP_BUFFER_TOO_SMALL 0xC0292006 The buffer is too small to contain all data. No information has been written to the buffer. STATUS_PCP_INTERNAL_ERROR 0xC0292007 An unexpected internal error has occurred in the Platform Crypto Provider. STATUS_PCP_POLICY_NOT_FOUND 0xC029200A The referenced policy was not found. STATUS_PCP_PROFILE_NOT_FOUND 0xC029200B The referenced profile was not found. STATUS_PCP_VALIDATION_FAILED 0xC029200C The validation was not succesful. STATUS_HV_INVALID_ALIGNMENT 0xC0350004 The hypervisor could not perform the operation because a parameter has an invalid alignment. STATUS_HV_INVALID_PARAMETER 0xC0350005 The hypervisor could not perform the operation because an invalid parameter was specified. STATUS_HV_ACCESS_DENIED 0xC0350006 Access to the specified object was denied. STATUS_HV_OPERATION_DENIED 0xC0350008 The operation is not allowed in the current state. STATUS_HV_UNKNOWN_PROPERTY 0xC0350009 The hypervisor does not recognize the specified partition property. STATUS_HV_INSUFFICIENT_MEMORY 0xC035000B There is not enough memory in the hypervisor pool to complete the operation. STATUS_HV_PARTITION_TOO_DEEP 0xC035000C The maximum partition depth has been exceeded for the partition hierarchy. STATUS_HV_INVALID_PARTITION_ID 0xC035000D A partition with the specified partition Id does not exist. STATUS_HV_INVALID_VP_INDEX 0xC035000E The hypervisor could not perform the operation because the specified VP index is invalid. STATUS_HV_INVALID_PORT_ID 0xC0350011 The hypervisor could not perform the operation because the specified port identifier is invalid. STATUS_HV_INVALID_CONNECTION_ID 0xC0350012 The hypervisor could not perform the operation because the specified connection identifier is invalid. STATUS_HV_INSUFFICIENT_BUFFERS 0xC0350013 Not enough buffers were supplied to send a message. STATUS_HV_NOT_ACKNOWLEDGED 0xC0350014 The previous virtual interrupt has not been acknowledged. STATUS_HV_ACKNOWLEDGED 0xC0350016 The previous virtual interrupt has already been acknowledged. STATUS_HV_INVALID_SYNIC_STATE 0xC0350018 The hypervisor could not complete the operation because a required feature of the synthetic interrupt controller (SynIC) was disabled. STATUS_HV_OBJECT_IN_USE 0xC0350019 The hypervisor could not perform the operation because the object or value was either already in use or being used for a purpose that would not permit completing the operation. STATUS_HV_NO_DATA 0xC035001B An attempt to retrieve debugging data failed because none was available. STATUS_HV_INACTIVE 0xC035001C The physical connection being used for debugging has not recorded any receive activity since the last operation. STATUS_HV_NO_RESOURCES 0xC035001D There are not enough resources to complete the operation. STATUS_HV_FEATURE_UNAVAILABLE 0xC035001E A hypervisor feature is not available to the user. STATUS_HV_INVALID_LP_INDEX 0xC0350041 The hypervisor could not perform the operation because the specified LP index is invalid. STATUS_HV_NOT_PRESENT 0xC0351000 No hypervisor is present on this system. STATUS_VID_DUPLICATE_HANDLER 0xC0370001 The handler for the virtualization infrastructure driver is already registered. Restarting the virtual machine may fix the problem. If the problem persists, try restarting the physical computer. STATUS_VID_TOO_MANY_HANDLERS 0xC0370002 The number of registered handlers for the virtualization infrastructure driver exceeded the maximum. Restarting the virtual machine may fix the problem. If the problem persists, try restarting the physical computer. STATUS_VID_QUEUE_FULL 0xC0370003 The message queue for the virtualization infrastructure driver is full and cannot accept new messages. Restarting the virtual machine may fix the problem. If the problem persists, try restarting the physical computer. STATUS_VID_HANDLER_NOT_PRESENT 0xC0370004 No handler exists to handle the message for the virtualization infrastructure driver. Restarting the virtual machine may fix the problem. If the problem persists, try restarting the physical computer. STATUS_VID_INVALID_OBJECT_NAME 0xC0370005 The name of the partition or message queue for the virtualization infrastructure driver is invalid. Restarting the virtual machine may fix the problem. If the problem persists, try restarting the physical computer. STATUS_VID_MB_STILL_REFERENCED 0xC037000D The memory block for the virtualization infrastructure driver is still being used and cannot be destroyed. STATUS_VID_PAGE_RANGE_OVERFLOW 0xC0370013 The request exceeded the memory block page limit for the virtualization infrastructure driver. Restarting the virtual machine may fix the problem. If the problem persists, try restarting the physical computer. STATUS_VID_INVALID_PPM_HANDLE 0xC0370018 The handle is not a valid parent partition mapping handle for the virtualization infrastructure driver. STATUS_VID_MBPS_ARE_LOCKED 0xC0370019 Notifications cannot be created on the memory block because it is use. STATUS_VID_MESSAGE_QUEUE_CLOSED 0xC037001A The message queue for the virtualization infrastructure driver has been closed. Restarting the virtual machine may fix the problem. If the problem persists, try restarting the physical computer. STATUS_VID_STOP_PENDING 0xC037001C Cannot stop the virtual processor immediately because of a pending intercept. STATUS_VID_MMIO_RANGE_DESTROYED 0xC0370021 The memory mapped I/O for this page range no longer exists. Restarting the virtual machine may fix the problem. If the problem persists, try restarting the physical computer. STATUS_VID_SAVED_STATE_CORRUPT 0xC0370027 Cannot restore this virtual machine because the saved state data cannot be read. Delete the saved state data and then try to start the virtual machine. STATUS_IPSEC_BAD_SPI 0xC0360001 The SPI in the packet does not match a valid IPsec SA. STATUS_IPSEC_WRONG_SA 0xC0360003 Packet was received on an IPsec SA that does not match the packet characteristics. STATUS_IPSEC_INVALID_PACKET 0xC0360005 IPsec header and/or trailer in the packet is invalid. STATUS_IPSEC_CLEAR_TEXT_DROP 0xC0360007 IPsec dropped a clear text packet. STATUS_IPSEC_AUTH_FIREWALL_DROP 0xC0360008 IPsec dropped an incoming ESP packet in authenticated firewall mode. This drop is benign. STATUS_IPSEC_THROTTLE_DROP 0xC0360009 IPsec dropped a packet due to DoS throttling. STATUS_IPSEC_DOSP_BLOCK 0xC0368000 IPsec DoS Protection matched an explicit block rule. STATUS_IPSEC_DOSP_MAX_ENTRIES 0xC0368004 IPsec DoS Protection failed to create state because the maximum number of entries allowed by policy has been reached. STATUS_VOLMGR_DATABASE_FULL 0xC0380001 The configuration database is full. STATUS_VOLMGR_DISK_DUPLICATE 0xC0380006 The same disk was specified more than once in the migration list. STATUS_VOLMGR_DISK_DYNAMIC 0xC0380007 The disk is already dynamic. STATUS_VOLMGR_DISK_ID_INVALID 0xC0380008 The specified disk id is invalid. There are no disks with the specified disk id. STATUS_VOLMGR_DISK_INVALID 0xC0380009 The specified disk is an invalid disk. Operation cannot complete on an invalid disk. STATUS_VOLMGR_DISK_LAST_VOTER 0xC038000A The specified disk(s) cannot be removed since it is the last remaining voter. STATUS_VOLMGR_DISK_MISSING 0xC0380011 The specified disk is missing. The operation cannot complete on a missing disk. STATUS_VOLMGR_DISK_NOT_EMPTY 0xC0380012 The specified disk is not empty. STATUS_VOLMGR_MEMBER_IN_SYNC 0xC0380023 The specified member is already in-sync with the other active members. It does not need to be regenerated. STATUS_VOLMGR_MEMBER_MISSING 0xC0380026 The specified member is missing. It cannot be regenerated. STATUS_VOLMGR_ALL_DISKS_FAILED 0xC0380029 All disks belonging to the pack failed. STATUS_VOLMGR_NO_SUCH_USER 0xC038002B The specified notification user does not exist. Failed to unregister user for notifications. STATUS_VOLMGR_PACK_DUPLICATE 0xC038002F The specified source and target packs are identical. STATUS_VOLMGR_PACK_ID_INVALID 0xC0380030 The specified pack id is invalid. There are no packs with the specified pack id. STATUS_VOLMGR_PACK_INVALID 0xC0380031 The specified pack is the invalid pack. The operation cannot complete with the invalid pack. STATUS_VOLMGR_PACK_NAME_INVALID 0xC0380032 The specified pack name is invalid. STATUS_VOLMGR_PACK_OFFLINE 0xC0380033 The specified pack is offline. STATUS_VOLMGR_PACK_HAS_QUORUM 0xC0380034 The specified pack already has a quorum of healthy disks. STATUS_VOLMGR_PLEX_IN_SYNC 0xC0380038 The specified plex is already in-sync with the other active plexes. It does not need to be regenerated. STATUS_VOLMGR_PLEX_LAST_ACTIVE 0xC038003B The specified plex is the last active plex in the volume. The plex cannot be removed or else the volume will go offline. STATUS_VOLMGR_PLEX_MISSING 0xC038003C The specified plex is missing. STATUS_VOLMGR_PLEX_REGENERATING 0xC038003D The specified plex is currently regenerating. STATUS_VOLMGR_PLEX_TYPE_INVALID 0xC038003E The specified plex type is invalid. STATUS_VOLMGR_PLEX_NOT_RAID5 0xC038003F The operation is only supported on RAID-5 plexes. STATUS_VOLMGR_PLEX_NOT_SIMPLE 0xC0380040 The operation is only supported on simple plexes. STATUS_VOLMGR_VOLUME_ID_INVALID 0xC0380046 The specified volume id is invalid. There are no volumes with the specified volume id. STATUS_VOLMGR_VOLUME_OFFLINE 0xC038004B The specified volume is offline. STATUS_VOLMGR_VOLUME_RETAINED 0xC038004C The specified volume already has a retain partition. STATUS_VOLMGR_BAD_BOOT_DISK 0xC038004F The boot disk experienced failures. STATUS_VOLMGR_NOT_PRIMARY_PACK 0xC0380052 The specified pack is not the primary pack. STATUS_VOLMGR_VOLUME_MIRRORED 0xC0380056 The operation is not supported on mirrored volumes. STATUS_BCD_TOO_MANY_ELEMENTS 0xC0390002 Entries enumerated have exceeded the allowed threshold. STATUS_VHD_DRIVE_FOOTER_MISSING 0xC03A0001 The virtual hard disk is corrupted. The virtual hard disk drive footer is missing. STATUS_VHD_DRIVE_FOOTER_CORRUPT 0xC03A0003 The virtual hard disk is corrupted. The virtual hard disk drive footer in the virtual hard disk is corrupted. STATUS_VHD_FORMAT_UNKNOWN 0xC03A0004 The system does not recognize the file format of this virtual hard disk. STATUS_VHD_INVALID_BLOCK_SIZE 0xC03A000B The system does not support this version of the virtual hard disk. The block size is invalid. STATUS_VHD_BITMAP_MISMATCH 0xC03A000C The virtual hard disk is corrupted. The block bitmap does not match with the block data present in the virtual hard disk. STATUS_VHD_PARENT_VHD_NOT_FOUND 0xC03A000D The chain of virtual hard disks is broken. The system cannot locate the parent virtual hard disk for the differencing disk. STATUS_VHD_INVALID_SIZE 0xC03A0012 The size of the virtual hard disk is not valid. STATUS_VHD_INVALID_FILE_SIZE 0xC03A0013 The file size of this virtual hard disk is not valid. STATUS_VIRTUAL_DISK_LIMITATION 0xC03A001A The requested operation could not be completed due to a virtual disk system limitation. On NTFS, virtual hard disk files must be uncompressed and unencrypted. On ReFS, virtual hard disk files must not have the integrity bit set. STATUS_VHD_INVALID_TYPE 0xC03A001B The requested operation cannot be performed on a virtual disk of this type. STATUS_VHD_INVALID_STATE 0xC03A001C The requested operation cannot be performed on the virtual disk in its current state. STATUS_VHD_METADATA_FULL 0xC03A0028 There is not enough space in the virtual disk file for the provided metadata item. STATUS_QUERY_STORAGE_ERROR 0x803A0001 The virtualization storage subsystem has generated an error. STATUS_DIS_NOT_PRESENT 0xC03C0001 The Derived Indexed Store is not present (or currently loaded) on this system. STATUS_DIS_ATTRIBUTE_NOT_FOUND 0xC03C0002 The Attribute was not found in the store for a given object. STATUS_DIS_PARTIAL_DATA 0xC03C0004 Partial data was successfully returned, some attributes need to be calculated from elsewhere. STATUS_RKF_KEY_NOT_FOUND 0xC0400001 The Resume Key Filter could not find the resume key supplied for the operation. STATUS_RKF_DUPLICATE_KEY 0xC0400002 The Resume Key Filter found an existing resume key that matches the one supplied for the handle. STATUS_RKF_BLOB_FULL 0xC0400003 The Resume Key Filter data blob attached to the handle is full. No more space is available. STATUS_RKF_STORE_FULL 0xC0400004 The Resume Key Filter handle store is full. No more resume handles can be accepted. STATUS_RKF_FILE_BLOCKED 0xC0400005 The Resume Key Filter failed the operation because the file is temporarily blocked pending the resume of existing handles on the file. STATUS_RKF_ACTIVE_KEY 0xC0400006 The Resume Key Filter found an existing resume key that matches the one supplied on a handle that’s active/open. The operation requires an inactive/closed handle. STATUS_RDBSS_RESTART_OPERATION 0xC0410001 The operation must be restarted by RDBSS. STATUS_RDBSS_CONTINUE_OPERATION 0xC0410002 The operation must continue processing. STATUS_RDBSS_POST_OPERATION 0xC0410003 The operation must be posted to a thread to be retried at passive IRQL. STATUS_BTH_ATT_INVALID_HANDLE 0xC0420001 The attribute handle given was not valid on this server. STATUS_BTH_ATT_INVALID_PDU 0xC0420004 The attribute PDU was invalid. STATUS_BTH_ATT_INVALID_OFFSET 0xC0420007 Offset specified was past the end of the attribute. STATUS_BTH_ATT_UNLIKELY 0xC042000E The attribute request that was requested has encountered an error that was unlikely, and therefore could not be completed as requested. STATUS_BTH_ATT_UNKNOWN_ERROR 0xC0421000 An error that lies in the reserved range has been received. STATUS_SECUREBOOT_NOT_ENABLED 0x80430006 Secure Boot is not enabled on this machine. STATUS_SECUREBOOT_FILE_REPLACED 0xC0430007 Secure Boot requires that certain files and drivers are not replaced by other files or drivers. STATUS_SPACES_NOT_ENOUGH_DRIVES 0xC0E7000B There were not enough physical disks to complete the requested operation.

davidvielmetter.com

Status

This documentation is archived and is not being maintained.

The status indicates whether the data value or some other value, such as a NULL, is to be used as the value of the column or parameter. If the data value is to be used, the consumer sets the status to DBSTATUS_S_OK on input. On output, the provider returns information about whether the consumer was able to set or get the value. The status is described in the DBSTATUS enumerated type defined in Appendix D: Cotypes, Structures, and Enumerated Types.

To get rowset or output parameter data, use ICommand::Execute, IMultipleResults::GetResults, IRowset::GetData, IRowsetRefresh::GetLastVisibleData, and IRowsetUpdate::GetOriginalData. As the provider returns the data, it sets the status of each column or output parameter so that the consumer can determine which data values it got successfully. It produces the return codes as follows:

  • Success return code (S_OK) ? No errors occurred while getting data for any columns or parameters. Warning conditions may have occurred for any columns or parameters.

    Note

    Truncation of variable length data is a warning condition when getting data. The corresponding status is set to DBSTATUS_S_TRUNCATED.

  • DB_S_ERRORSOCCURRED ? Errors occurred while getting data for one or more columns or parameters, but data was successfully returned for at least one column or parameter. Warning conditions may have occurred for any nonerror columns or parameters. If status is bound, the consumer can check the status value to learn why the column failed.

  • DB_E_ERRORSOCCURRED ? Errors occurred while getting data for all columns or parameters. Warning conditions did not occur for any columns or parameters.

If the provider returns a fatal error other than DB_E_ERRORSOCCURRED, such as E_FAIL, the returned status values are undefined.

The following table explains the meaning of each returned status value, whether it is a success, error, or warning condition, and whether data was successfully returned.

Status value

Success, warning, or error

Data returned

Description

DBSTATUS_S_OK

Success

Y

The provider returned a non-null value.

DBSTATUS_S_ISNULL

Success

Y

The provider returned a null value. The consumer should ignore the contents of the value and length parts of the buffer.

DBSTATUS_S_TRUNCATED

Warning

Y

Variable-length data was truncated.

DBSTATUS_E_BADACCESSOR

Error

N

Accessor validation was deferred and was performed while the method returned data. The binding was invalid for this column or parameter.

For a description of the cases that might cause deferred accessor validation to fail, see the description of the DBBINDSTATUS values listed under the rgStatus argument in the reference entry for IAccessor::CreateAccessor.

DBSTATUS_E_CANTCONVERTVALUE

Error

N

The data value could not be converted for reasons other than sign mismatch or data overflow. For example, the data was corrupted in the data store but the row was still retrievable.

DBSTATUS_E_CANTCREATE

Error

N

One of the following conditions:

  • The provider could not allocate memory in which to return data.

  • The type indicator for the column was DBTYPE_IUNKNOWN, the provider supports only one open storage object at a time (DBPROP_

    MULTIPLESTORAGEOBJECTS was VARIANT_FALSE), and a storage object was already open on the rowset.

DBSTATUS_E_DATAOVERFLOW

Error

N

Conversion failed because the data value overflowed the type specified for the value part in the consumer's buffer.

DBSTATUS_E_SIGNMISMATCH

Error

N

Conversion failed because the data value was signed and the type specified for the value part in the consumer's buffer was unsigned.

DBSTATUS_E_UNAVAILABLE

Error

N

The provider could not determine the value. For example, the row was just created, the default for the column was not available, and the consumer had not yet set a new value.

To set rowset data or to set input parameter data, use ICommand::Execute, IRowsetChange::SetData, IRowsetChange::InsertRow, IRowsetIndex::Seek, and IRowsetIndex::SetRange. When calling these methods, the consumer must set the status to one of the values in the following table.

Status value

Description

DBSTATUS_S_OK

The value sent to the provider is not NULL and is passed in the consumer's buffer at the offset specified by obValue in the binding.

DBSTATUS_S_ISNULL

The value sent to the provider is NULL. The provider ignores the contents of the value and length parts of the consumer's buffer.

DBSTATUS_S_DEFAULT

The provider is to use the default value in IRowsetChange::SetData or IRowsetChange::InsertRow or as the input value for an input or input/output parameter in a procedure. The provider ignores the contents of the value and the length parts of the consumer's buffer on input, although it sets them on output for input/output parameters. This status value is never returned when getting data. If the provider can determine the default value on output, that value is returned along with a status of DBSTATUS_S_OK if the default is not NULL, or DBSTATUS_S_ISNULL if the default is NULL. If the provider cannot determine the default value on output, it returns DBSTATUS_E_UNAVAILABLE when calling IRowset::GetData for columns set as DBSTATUS_S_DEFAULT. Consumers should be prepared for OLE DB 1.0 or 1.1 providers to return DBSTATUS_E_BADSTATUS when attempting to specify DBSTATUS_S_DEFAULT in IRowsetChange::SetData or in IRowsetChange::InsertRow or for providers that cannot set a column to its default value.

DBSTATUS_S_IGNORE

The provider is to skip this column when setting data. The provider ignores the contents of the value and the length parts of the consumer's buffer for this column and does not change the underlying column value. DBSTATUS_S_IGNORE is not valid for parameters and returns DBSTATUS_E_BADSTATUS. Consumers should use DBSTATUS_S_DEFAULT to pass default parameter values. Consumers should be prepared for OLE DB 1.x providers to return DBSTATUS_E_BADSTATUS when attempting to specify DBSTATUS_S_IGNORE in IRowsetChange::SetData or in IRowsetChange::InsertRow.

Note

In IRowsetChange::InsertRow, specifying DBSTATUS_S_IGNORE for a column is equivalent to not including that column in the accessor. For most providers, this is equivalent to specifying DBSTATUS_S_DEFAULT.

As the provider transfers data from the consumer to the provider, it sets the status of each column or input parameter so that the consumer can determine which data values were successfully set. The provider produces return codes as follows:

  • Success return code (S_OK) ? No errors occurred while setting data for any columns or parameters.

  • DB_S_ERRORSOCCURRED ? Errors occurred while setting data for one or more columns or parameters, but data was successfully set for at least one column or parameter.

    Note

    Truncation of variable-length data is an error condition when setting data. The corresponding status is set to DBSTATUS_E_CANTCONVERTVALUE or DBSTATUS_E_OVERFLOW as appropriate.

  • DB_E_ERRORSOCCURRED ? Errors occurred while setting data for all columns or parameters.

If the provider returns a fatal error other than DB_E_ERRORSOCCURRED, such as E_FAIL, the returned status values are undefined. If the consumer did not bind the status for a column or input parameter and the method returns DB_S_ERRORSOCCURRED or DB_E_ERRORSOCCURRED, the consumer must assume that the value for that column or input parameter was not successfully set.

The following table explains the meaning of each returned status value, whether it is a success or error condition, and whether data was successfully sent.

Status value

Success, warning,

or error

Data

sent

Description

DBSTATUS_S_OK

Success

Y

A non-null value was sent to the provider.

DBSTATUS_S_ISNULL

Success

Y

A null value was sent to the provider.

DBSTATUS_S_DEFAULT

Success

Y

The provider used the default value for an input parameter in a procedure. If the provider used the default value on input for an input/output parameter, the status is set to the status of the output value on output.

DBSTATUS_S_IGNORE

Success

N

The consumer specified DBSTATUS_S_IGNORE when setting data, and the provider ignored the column.

DBSTATUS_E_BADACCESSOR

Error

N

Accessor validation was deferred and was performed while the method sent data. The binding was invalid for this column or parameter.

For a description of the cases that may cause deferred accessor validation to fail, see the description of the DBBINDSTATUS values listed under the rgStatus argument of in the reference entry for IAccessor::CreateAccessor.

DBSTATUS_E_BADSTATUS

Error

N

One of the following conditions:

  • The status value sent to the provider was not DBSTATUS_S_OK, DBSTATUS_S_ISNULL, DBSTATUS_S_IGNORE, or DBSTATUS_S_DEFAULT.

  • The status value was DBSTATUS_S_DEFAULT, the binding was not passed as an input or input/output parameter in a procedure, and the provider was not able to determine the default value for the column.

  • The status value was DBSTATUS_S_DEFAULT, the binding was used in a method other than IRowsetChange::SetData or IRowsetChange::InsertData, and the binding was not passed as an input or input/output parameter in a procedure.

  • The status value was DBSTATUS_S_DEFAULT, the binding was not for an input or input/output parameter in a procedure, and the provider was a 1.0 or 1.1 provider.

  • The binding used in IRowsetChange::SetData did not contain the value part, and status on input is not DBSTATUS_S_ISNULL, DBSTATUS_S_IGNORE, DBSTATUS_S_DEFAULT nor DBSTATUS_S_OK.

  • The status value sent to the provider was DBSTATUS_S_IGNORE, and the binding was for a parameter in a procedure.

  • The status value sent to a provider was DBSTATUS_S_IGNORE, and the provider was a 1.x provider.

DBSTATUS_E_CANTCONVERTVALUE

Error

N

The data value could not be converted for reasons other than sign mismatch or data overflow. For example, converting the data would have truncated it, including truncating nonsignificant digits in numeric data.

DBSTATUS_E_CANTCREATE

Error

N

The type indicator for the column was DBTYPE_IUNKNOWN, the provider supports only one open storage object at a time (DBPROP_MULTIPLESTORAGEOBJECTS was VARIANT_FALSE), and a storage object was already open on the rowset.

DBSTATUS_E_DATAOVERFLOW

Error

N

Conversion failed because the data value overflowed the type used by the provider.

DBSTATUS_E_INTEGRITYVIOLATION

Error

N

The data value violated the integrity constraints for the column.

DBSTATUS_E_PERMISSIONDENIED

Error

N

The DBPROP_COLUMNRESTRICT property was VARIANT_TRUE, and the user did not have permission to write to the column.

DBSTATUS_E_SCHEMAVIOLATION

Error

N

The data value violated the schema's constraint for the column.

DBSTATUS_E_SIGNMISMATCH

Error

N

Conversion failed because the data value was signed and the type used by the provider was unsigned.

DBSTATUS_E_UNAVAILABLE

Error

N

One of the following conditions:

  • The consumer did not bind the value part, IColumnsInfo::GetColumnInfo does not return DBCOLUMNFLAGS_ISLONG for the column, and the status was DBSTATUS_S_OK.

  • The consumer did not bind the length part of the data, the status was DBSTATUS_S_OK, and wType in the DBBINDING structure was DBTYPE_BYTES.

  • The value was not sent for an undetermined reason. For example, the provider encountered an error while sending a column or parameter value and stopped processing. If the provider backs out changes it made before the error, it also sets the status of the columns from which it backs data out to DBSTATUS_E_UNAVAILABLE.

This topic is a part of:

msdn.microsoft.com

[MS-ERREF]: NTSTATUS Values

By combining the NTSTATUS into a single 32-bit numbering space, the following NTSTATUS values are defined. Most values also have a defined default message that can be used to map the value to a human-readable text message. When this is done, the NTSTATUS value is also known as a message identifier.

This document provides the common usage details of the NTSTATUS values; individual protocol specifications provide expanded or modified definitions when needed.

In the following descriptions, a percentage sign that is followed by one or more alphanumeric characters (for example, "%1" or "%hs") indicates a variable that is replaced by text at the time the value is returned.

Return value/code

Description

0x00000000

STATUS_SUCCESS

The operation completed successfully.

0x00000000

STATUS_WAIT_0

The caller specified WaitAny for WaitType and one of the dispatcher objects in the Object array has been set to the signaled state.

0x00000001

STATUS_WAIT_1

The caller specified WaitAny for WaitType and one of the dispatcher objects in the Object array has been set to the signaled state.

0x00000002

STATUS_WAIT_2

The caller specified WaitAny for WaitType and one of the dispatcher objects in the Object array has been set to the signaled state.

0x00000003

STATUS_WAIT_3

The caller specified WaitAny for WaitType and one of the dispatcher objects in the Object array has been set to the signaled state.

0x0000003F

STATUS_WAIT_63

The caller specified WaitAny for WaitType and one of the dispatcher objects in the Object array has been set to the signaled state.

0x00000080

STATUS_ABANDONED

The caller attempted to wait for a mutex that has been abandoned.

0x00000080

STATUS_ABANDONED_WAIT_0

The caller attempted to wait for a mutex that has been abandoned.

0x000000BF

STATUS_ABANDONED_WAIT_63

The caller attempted to wait for a mutex that has been abandoned.

0x000000C0

STATUS_USER_APC

A user-mode APC was delivered before the given Interval expired.

0x00000101

STATUS_ALERTED

The delay completed because the thread was alerted.

0x00000102

STATUS_TIMEOUT

The given Timeout interval expired.

0x00000103

STATUS_PENDING

The operation that was requested is pending completion.

0x00000104

STATUS_REPARSE

A reparse should be performed by the Object Manager because the name of the file resulted in a symbolic link.

0x00000105

STATUS_MORE_ENTRIES

Returned by enumeration APIs to indicate more information is available to successive calls.

0x00000106

STATUS_NOT_ALL_ASSIGNED

Indicates not all privileges or groups that are referenced are assigned to the caller. This allows, for example, all privileges to be disabled without having to know exactly which privileges are assigned.

0x00000107

STATUS_SOME_NOT_MAPPED

Some of the information to be translated has not been translated.

0x00000108

STATUS_OPLOCK_BREAK_IN_PROGRESS

An open/create operation completed while an opportunistic lock (oplock) break is underway.

0x00000109

STATUS_VOLUME_MOUNTED

A new volume has been mounted by a file system.

0x0000010A

STATUS_RXACT_COMMITTED

This success level status indicates that the transaction state already exists for the registry subtree but that a transaction commit was previously aborted. The commit has now been completed.

0x0000010B

STATUS_NOTIFY_CLEANUP

Indicates that a notify change request has been completed due to closing the handle that made the notify change request.

0x0000010C

STATUS_NOTIFY_ENUM_DIR

Indicates that a notify change request is being completed and that the information is not being returned in the caller's buffer. The caller now needs to enumerate the files to find the changes.

0x0000010D

STATUS_NO_QUOTAS_FOR_ACCOUNT

{No Quotas} No system quota limits are specifically set for this account.

0x0000010E

STATUS_PRIMARY_TRANSPORT_CONNECT_FAILED

{Connect Failure on Primary Transport} An attempt was made to connect to the remote server %hs on the primary transport, but the connection failed. The computer WAS able to connect on a secondary transport.

0x00000110

STATUS_PAGE_FAULT_TRANSITION

The page fault was a transition fault.

0x00000111

STATUS_PAGE_FAULT_DEMAND_ZERO

The page fault was a demand zero fault.

0x00000112

STATUS_PAGE_FAULT_COPY_ON_WRITE

The page fault was a demand zero fault.

0x00000113

STATUS_PAGE_FAULT_GUARD_PAGE

The page fault was a demand zero fault.

0x00000114

STATUS_PAGE_FAULT_PAGING_FILE

The page fault was satisfied by reading from a secondary storage device.

0x00000115

STATUS_CACHE_PAGE_LOCKED

The cached page was locked during operation.

0x00000116

STATUS_CRASH_DUMP

The crash dump exists in a paging file.

0x00000117

STATUS_BUFFER_ALL_ZEROS

The specified buffer contains all zeros.

0x00000118

STATUS_REPARSE_OBJECT

A reparse should be performed by the Object Manager because the name of the file resulted in a symbolic link.

0x00000119

STATUS_RESOURCE_REQUIREMENTS_CHANGED

The device has succeeded a query-stop and its resource requirements have changed.

0x00000120

STATUS_TRANSLATION_COMPLETE

The translator has translated these resources into the global space and no additional translations should be performed.

0x00000121

STATUS_DS_MEMBERSHIP_EVALUATED_LOCALLY

The directory service evaluated group memberships locally, because it was unable to contact a global catalog server.

0x00000122

STATUS_NOTHING_TO_TERMINATE

A process being terminated has no threads to terminate.

0x00000123

STATUS_PROCESS_NOT_IN_JOB

The specified process is not part of a job.

0x00000124

STATUS_PROCESS_IN_JOB

The specified process is part of a job.

0x00000125

STATUS_VOLSNAP_HIBERNATE_READY

{Volume Shadow Copy Service} The system is now ready for hibernation.

0x00000126

STATUS_FSFILTER_OP_COMPLETED_SUCCESSFULLY

A file system or file system filter driver has successfully completed an FsFilter operation.

0x00000127

STATUS_INTERRUPT_VECTOR_ALREADY_CONNECTED

The specified interrupt vector was already connected.

0x00000128

STATUS_INTERRUPT_STILL_CONNECTED

The specified interrupt vector is still connected.

0x00000129

STATUS_PROCESS_CLONED

The current process is a cloned process.

0x0000012A

STATUS_FILE_LOCKED_WITH_ONLY_READERS

The file was locked and all users of the file can only read.

0x0000012B

STATUS_FILE_LOCKED_WITH_WRITERS

The file was locked and at least one user of the file can write.

0x00000202

STATUS_RESOURCEMANAGER_READ_ONLY

The specified ResourceManager made no changes or updates to the resource under this transaction.

0x00000367

STATUS_WAIT_FOR_OPLOCK

An operation is blocked and waiting for an oplock.

0x00010001

DBG_EXCEPTION_HANDLED

Debugger handled the exception.

0x00010002

DBG_CONTINUE

The debugger continued.

0x001C0001

STATUS_FLT_IO_COMPLETE

The IO was completed by a filter.

0xC0000467

STATUS_FILE_NOT_AVAILABLE

The file is temporarily unavailable.

0xC0000480

STATUS_SHARE_UNAVAILABLE

The share is temporarily unavailable.

0xC0000721

STATUS_CALLBACK_RETURNED_THREAD_AFFINITY

A threadpool worker thread entered a callback at thread affinity %p and exited at affinity %p.

This is unexpected, indicating that the callback missed restoring the priority.

0x40000000

STATUS_OBJECT_NAME_EXISTS

{Object Exists} An attempt was made to create an object but the object name already exists.

0x40000001

STATUS_THREAD_WAS_SUSPENDED

{Thread Suspended} A thread termination occurred while the thread was suspended. The thread resumed, and termination proceeded.

0x40000002

STATUS_WORKING_SET_LIMIT_RANGE

{Working Set Range Error} An attempt was made to set the working set minimum or maximum to values that are outside the allowable range.

0x40000003

STATUS_IMAGE_NOT_AT_BASE

{Image Relocated} An image file could not be mapped at the address that is specified in the image file. Local fixes must be performed on this image.

0x40000004

STATUS_RXACT_STATE_CREATED

This informational level status indicates that a specified registry subtree transaction state did not yet exist and had to be created.

0x40000005

STATUS_SEGMENT_NOTIFICATION

{Segment Load} A virtual DOS machine (VDM) is loading, unloading, or moving an MS-DOS or Win16 program segment image. An exception is raised so that a debugger can load, unload, or track symbols and breakpoints within these 16-bit segments.

0x40000006

STATUS_LOCAL_USER_SESSION_KEY

{Local Session Key} A user session key was requested for a local remote procedure call (RPC) connection. The session key that is returned is a constant value and not unique to this connection.

0x40000007

STATUS_BAD_CURRENT_DIRECTORY

{Invalid Current Directory} The process cannot switch to the startup current directory %hs. Select OK to set the current directory to %hs, or select CANCEL to exit.

0x40000008

STATUS_SERIAL_MORE_WRITES

{Serial IOCTL Complete} A serial I/O operation was completed by another write to a serial port. (The IOCTL_SERIAL_XOFF_COUNTER reached zero.)

0x40000009

STATUS_REGISTRY_RECOVERED

{Registry Recovery} One of the files that contains the system registry data had to be recovered by using a log or alternate copy. The recovery was successful.

0x4000000A

STATUS_FT_READ_RECOVERY_FROM_BACKUP

{Redundant Read} To satisfy a read request, the Windows NT operating system fault-tolerant file system successfully read the requested data from a redundant copy. This was done because the file system encountered a failure on a member of the fault-tolerant volume but was unable to reassign the failing area of the device.

0x4000000B

STATUS_FT_WRITE_RECOVERY

{Redundant Write} To satisfy a write request, the Windows NT fault-tolerant file system successfully wrote a redundant copy of the information. This was done because the file system encountered a failure on a member of the fault-tolerant volume but was unable to reassign the failing area of the device.

0x4000000C

STATUS_SERIAL_COUNTER_TIMEOUT

{Serial IOCTL Timeout} A serial I/O operation completed because the time-out period expired. (The IOCTL_SERIAL_XOFF_COUNTER had not reached zero.)

0x4000000D

STATUS_NULL_LM_PASSWORD

{Password Too Complex} The Windows password is too complex to be converted to a LAN Manager password. The LAN Manager password that returned is a NULL string.

0x4000000E

STATUS_IMAGE_MACHINE_TYPE_MISMATCH

{Machine Type Mismatch} The image file %hs is valid but is for a machine type other than the current machine. Select OK to continue, or CANCEL to fail the DLL load.

0x4000000F

STATUS_RECEIVE_PARTIAL

{Partial Data Received} The network transport returned partial data to its client. The remaining data will be sent later.

0x40000010

STATUS_RECEIVE_EXPEDITED

{Expedited Data Received} The network transport returned data to its client that was marked as expedited by the remote system.

0x40000011

STATUS_RECEIVE_PARTIAL_EXPEDITED

{Partial Expedited Data Received} The network transport returned partial data to its client and this data was marked as expedited by the remote system. The remaining data will be sent later.

0x40000012

STATUS_EVENT_DONE

{TDI Event Done} The TDI indication has completed successfully.

0x40000013

STATUS_EVENT_PENDING

{TDI Event Pending} The TDI indication has entered the pending state.

0x40000014

STATUS_CHECKING_FILE_SYSTEM

Checking file system on %wZ.

0x40000015

STATUS_FATAL_APP_EXIT

{Fatal Application Exit} %hs

0x40000016

STATUS_PREDEFINED_HANDLE

The specified registry key is referenced by a predefined handle.

0x40000017

STATUS_WAS_UNLOCKED

{Page Unlocked} The page protection of a locked page was changed to 'No Access' and the page was unlocked from memory and from the process.

0x40000018

STATUS_SERVICE_NOTIFICATION

%hs

0x40000019

STATUS_WAS_LOCKED

{Page Locked} One of the pages to lock was already locked.

0x4000001A

STATUS_LOG_HARD_ERROR

Application popup: %1 : %2

0x4000001B

STATUS_ALREADY_WIN32

A Win32 process already exists.

0x4000001C

STATUS_WX86_UNSIMULATE

An exception status code that is used by the Win32 x86 emulation subsystem.

0x4000001D

STATUS_WX86_CONTINUE

An exception status code that is used by the Win32 x86 emulation subsystem.

0x4000001E

STATUS_WX86_SINGLE_STEP

An exception status code that is used by the Win32 x86 emulation subsystem.

0x4000001F

STATUS_WX86_BREAKPOINT

An exception status code that is used by the Win32 x86 emulation subsystem.

0x40000020

STATUS_WX86_EXCEPTION_CONTINUE

An exception status code that is used by the Win32 x86 emulation subsystem.

0x40000021

STATUS_WX86_EXCEPTION_LASTCHANCE

An exception status code that is used by the Win32 x86 emulation subsystem.

0x40000022

STATUS_WX86_EXCEPTION_CHAIN

An exception status code that is used by the Win32 x86 emulation subsystem.

0x40000023

STATUS_IMAGE_MACHINE_TYPE_MISMATCH_EXE

{Machine Type Mismatch} The image file %hs is valid but is for a machine type other than the current machine.

0x40000024

STATUS_NO_YIELD_PERFORMED

A yield execution was performed and no thread was available to run.

0x40000025

STATUS_TIMER_RESUME_IGNORED

The resume flag to a timer API was ignored.

0x40000026

STATUS_ARBITRATION_UNHANDLED

The arbiter has deferred arbitration of these resources to its parent.

0x40000027

STATUS_CARDBUS_NOT_SUPPORTED

The device has detected a CardBus card in its slot.

0x40000028

STATUS_WX86_CREATEWX86TIB

An exception status code that is used by the Win32 x86 emulation subsystem.

0x40000029

STATUS_MP_PROCESSOR_MISMATCH

The CPUs in this multiprocessor system are not all the same revision level. To use all processors, the operating system restricts itself to the features of the least capable processor in the system. If problems occur with this system, contact the CPU manufacturer to see if this mix of processors is supported.

0x4000002A

STATUS_HIBERNATED

The system was put into hibernation.

0x4000002B

STATUS_RESUME_HIBERNATION

The system was resumed from hibernation.

0x4000002C

STATUS_FIRMWARE_UPDATED

Windows has detected that the system firmware (BIOS) was updated [previous firmware date = %2, current firmware date %3].

0x4000002D

STATUS_DRIVERS_LEAKING_LOCKED_PAGES

A device driver is leaking locked I/O pages and is causing system degradation. The system has automatically enabled the tracking code to try and catch the culprit.

0x4000002E

STATUS_MESSAGE_RETRIEVED

The ALPC message being canceled has already been retrieved from the queue on the other side.

0x4000002F

STATUS_SYSTEM_POWERSTATE_TRANSITION

The system power state is transitioning from %2 to %3.

0x40000030

STATUS_ALPC_CHECK_COMPLETION_LIST

The receive operation was successful. Check the ALPC completion list for the received message.

0x40000031

STATUS_SYSTEM_POWERSTATE_COMPLEX_TRANSITION

The system power state is transitioning from %2 to %3 but could enter %4.

0x40000032

STATUS_ACCESS_AUDIT_BY_POLICY

Access to %1 is monitored by policy rule %2.

0x40000033

STATUS_ABANDON_HIBERFILE

A valid hibernation file has been invalidated and should be abandoned.

0x40000034

STATUS_BIZRULES_NOT_ENABLED

Business rule scripts are disabled for the calling application.

0x40000294

STATUS_WAKE_SYSTEM

The system has awoken.

0x40000370

STATUS_DS_SHUTTING_DOWN

The directory service is shutting down.

0x40010001

DBG_REPLY_LATER

Debugger will reply later.

0x40010002

DBG_UNABLE_TO_PROVIDE_HANDLE

Debugger cannot provide a handle.

0x40010003

DBG_TERMINATE_THREAD

Debugger terminated the thread.

0x40010004

DBG_TERMINATE_PROCESS

Debugger terminated the process.

0x40010005

DBG_CONTROL_C

Debugger obtained control of C.

0x40010006

DBG_PRINTEXCEPTION_C

Debugger printed an exception on control C.

0x40010007

DBG_RIPEXCEPTION

Debugger received a RIP exception.

0x40010008

DBG_CONTROL_BREAK

Debugger received a control break.

0x40010009

DBG_COMMAND_EXCEPTION

Debugger command communication exception.

0x40020056

RPC_NT_UUID_LOCAL_ONLY

A UUID that is valid only on this computer has been allocated.

0x400200AF

RPC_NT_SEND_INCOMPLETE

Some data remains to be sent in the request buffer.

0x400A0004

STATUS_CTX_CDM_CONNECT

The Client Drive Mapping Service has connected on Terminal Connection.

0x400A0005

STATUS_CTX_CDM_DISCONNECT

The Client Drive Mapping Service has disconnected on Terminal Connection.

0x4015000D

STATUS_SXS_RELEASE_ACTIVATION_CONTEXT

A kernel mode component is releasing a reference on an activation context.

0x40190034

STATUS_RECOVERY_NOT_NEEDED

The transactional resource manager is already consistent. Recovery is not needed.

0x40190035

STATUS_RM_ALREADY_STARTED

The transactional resource manager has already been started.

0x401A000C

STATUS_LOG_NO_RESTART

The log service encountered a log stream with no restart area.

0x401B00EC

STATUS_VIDEO_DRIVER_DEBUG_REPORT_REQUEST

{Display Driver Recovered From Failure} The %hs display driver has detected a failure and recovered from it. Some graphical operations might have failed. The next time you restart the machine, a dialog box appears, giving you an opportunity to upload data about this failure to Microsoft.

0x401E000A

STATUS_GRAPHICS_PARTIAL_DATA_POPULATED

The specified buffer is not big enough to contain the entire requested dataset. Partial data is populated up to the size of the buffer.

The caller needs to provide a buffer of the size as specified in the partially populated buffer's content (interface specific).

0x401E0117

STATUS_GRAPHICS_DRIVER_MISMATCH

The kernel driver detected a version mismatch between it and the user mode driver.

0x401E0307

STATUS_GRAPHICS_MODE_NOT_PINNED

No mode is pinned on the specified VidPN source/target.

0x401E031E

STATUS_GRAPHICS_NO_PREFERRED_MODE

The specified mode set does not specify a preference for one of its modes.

0x401E034B

STATUS_GRAPHICS_DATASET_IS_EMPTY

The specified dataset (for example, mode set, frequency range set, descriptor set, or topology) is empty.

0x401E034C

STATUS_GRAPHICS_NO_MORE_ELEMENTS_IN_DATASET

The specified dataset (for example, mode set, frequency range set, descriptor set, or topology) does not contain any more elements.

0x401E0351

STATUS_GRAPHICS_PATH_CONTENT_GEOMETRY_TRANSFORMATION_NOT_PINNED

The specified content transformation is not pinned on the specified VidPN present path.

0x401E042F

STATUS_GRAPHICS_UNKNOWN_CHILD_STATUS

The child device presence was not reliably detected.

0x401E0437

STATUS_GRAPHICS_LEADLINK_START_DEFERRED

Starting the lead adapter in a linked configuration has been temporarily deferred.

0x401E0439

STATUS_GRAPHICS_POLLING_TOO_FREQUENTLY

The display adapter is being polled for children too frequently at the same polling level.

0x401E043A

STATUS_GRAPHICS_START_DEFERRED

Starting the adapter has been temporarily deferred.

0x40230001

STATUS_NDIS_INDICATION_REQUIRED

The request will be completed later by an NDIS status indication.

0x80000001

STATUS_GUARD_PAGE_VIOLATION

{EXCEPTION} Guard Page Exception A page of memory that marks the end of a data structure, such as a stack or an array, has been accessed.

0x80000002

STATUS_DATATYPE_MISALIGNMENT

{EXCEPTION} Alignment Fault A data type misalignment was detected in a load or store instruction.

0x80000003

STATUS_BREAKPOINT

{EXCEPTION} Breakpoint A breakpoint has been reached.

0x80000004

STATUS_SINGLE_STEP

{EXCEPTION} Single Step A single step or trace operation has just been completed.

0x80000005

STATUS_BUFFER_OVERFLOW

{Buffer Overflow} The data was too large to fit into the specified buffer.

0x80000006

STATUS_NO_MORE_FILES

{No More Files} No more files were found which match the file specification.

0x80000007

STATUS_WAKE_SYSTEM_DEBUGGER

{Kernel Debugger Awakened} The system debugger was awakened by an interrupt.

0x8000000A

STATUS_HANDLES_CLOSED

{Handles Closed} Handles to objects have been automatically closed because of the requested operation.

0x8000000B

STATUS_NO_INHERITANCE

{Non-Inheritable ACL} An access control list (ACL) contains no components that can be inherited.

0x8000000C

STATUS_GUID_SUBSTITUTION_MADE

{GUID Substitution} During the translation of a globally unique identifier (GUID) to a Windows security ID (SID), no administratively defined GUID prefix was found. A substitute prefix was used, which will not compromise system security. However, this might provide a more restrictive access than intended.

0x8000000D

STATUS_PARTIAL_COPY

Because of protection conflicts, not all the requested bytes could be copied.

0x8000000E

STATUS_DEVICE_PAPER_EMPTY

{Out of Paper} The printer is out of paper.

0x8000000F

STATUS_DEVICE_POWERED_OFF

{Device Power Is Off} The printer power has been turned off.

0x80000010

STATUS_DEVICE_OFF_LINE

{Device Offline} The printer has been taken offline.

0x80000011

STATUS_DEVICE_BUSY

{Device Busy} The device is currently busy.

0x80000012

STATUS_NO_MORE_EAS

{No More EAs} No more extended attributes (EAs) were found for the file.

0x80000013

STATUS_INVALID_EA_NAME

{Illegal EA} The specified extended attribute (EA) name contains at least one illegal character.

0x80000014

STATUS_EA_LIST_INCONSISTENT

{Inconsistent EA List} The extended attribute (EA) list is inconsistent.

0x80000015

STATUS_INVALID_EA_FLAG

{Invalid EA Flag} An invalid extended attribute (EA) flag was set.

0x80000016

STATUS_VERIFY_REQUIRED

{Verifying Disk} The media has changed and a verify operation is in progress; therefore, no reads or writes can be performed to the device, except those that are used in the verify operation.

0x80000017

STATUS_EXTRANEOUS_INFORMATION

{Too Much Information} The specified access control list (ACL) contained more information than was expected.

0x80000018

STATUS_RXACT_COMMIT_NECESSARY

This warning level status indicates that the transaction state already exists for the registry subtree, but that a transaction commit was previously aborted. The commit has NOT been completed but has not been rolled back either; therefore, it can still be committed, if needed.

0x8000001A

STATUS_NO_MORE_ENTRIES

{No More Entries} No more entries are available from an enumeration operation.

0x8000001B

STATUS_FILEMARK_DETECTED

{Filemark Found} A filemark was detected.

0x8000001C

STATUS_MEDIA_CHANGED

{Media Changed} The media has changed.

0x8000001D

STATUS_BUS_RESET

{I/O Bus Reset} An I/O bus reset was detected.

0x8000001E

STATUS_END_OF_MEDIA

{End of Media} The end of the media was encountered.

0x8000001F

STATUS_BEGINNING_OF_MEDIA

The beginning of a tape or partition has been detected.

0x80000020

STATUS_MEDIA_CHECK

{Media Changed} The media might have changed.

0x80000021

STATUS_SETMARK_DETECTED

A tape access reached a set mark.

0x80000022

STATUS_NO_DATA_DETECTED

During a tape access, the end of the data written is reached.

0x80000023

STATUS_REDIRECTOR_HAS_OPEN_HANDLES

The redirector is in use and cannot be unloaded.

0x80000024

STATUS_SERVER_HAS_OPEN_HANDLES

The server is in use and cannot be unloaded.

0x80000025

STATUS_ALREADY_DISCONNECTED

The specified connection has already been disconnected.

0x80000026

STATUS_LONGJUMP

A long jump has been executed.

0x80000027

STATUS_CLEANER_CARTRIDGE_INSTALLED

A cleaner cartridge is present in the tape library.

0x80000028

STATUS_PLUGPLAY_QUERY_VETOED

The Plug and Play query operation was not successful.

0x80000029

STATUS_UNWIND_CONSOLIDATE

A frame consolidation has been executed.

0x8000002A

STATUS_REGISTRY_HIVE_RECOVERED

{Registry Hive Recovered} The registry hive (file): %hs was corrupted and it has been recovered. Some data might have been lost.

0x8000002B

STATUS_DLL_MIGHT_BE_INSECURE

The application is attempting to run executable code from the module %hs. This might be insecure. An alternative, %hs, is available. Should the application use the secure module %hs?

0x8000002C

STATUS_DLL_MIGHT_BE_INCOMPATIBLE

The application is loading executable code from the module %hs. This is secure but might be incompatible with previous releases of the operating system. An alternative, %hs, is available. Should the application use the secure module %hs?

0x8000002D

STATUS_STOPPED_ON_SYMLINK

The create operation stopped after reaching a symbolic link.

0x80000288

STATUS_DEVICE_REQUIRES_CLEANING

The device has indicated that cleaning is necessary.

0x80000289

STATUS_DEVICE_DOOR_OPEN

The device has indicated that its door is open. Further operations require it closed and secured.

0x80000803

STATUS_DATA_LOST_REPAIR

Windows discovered a corruption in the file %hs. This file has now been repaired. Check if any data in the file was lost because of the corruption.

0x80010001

DBG_EXCEPTION_NOT_HANDLED

Debugger did not handle the exception.

0x80130001

STATUS_CLUSTER_NODE_ALREADY_UP

The cluster node is already up.

0x80130002

STATUS_CLUSTER_NODE_ALREADY_DOWN

The cluster node is already down.

0x80130003

STATUS_CLUSTER_NETWORK_ALREADY_ONLINE

The cluster network is already online.

0x80130004

STATUS_CLUSTER_NETWORK_ALREADY_OFFLINE

The cluster network is already offline.

0x80130005

STATUS_CLUSTER_NODE_ALREADY_MEMBER

The cluster node is already a member of the cluster.

0x80190009

STATUS_COULD_NOT_RESIZE_LOG

The log could not be set to the requested size.

0x80190029

STATUS_NO_TXF_METADATA

There is no transaction metadata on the file.

0x80190031

STATUS_CANT_RECOVER_WITH_HANDLE_OPEN

The file cannot be recovered because there is a handle still open on it.

0x80190041

STATUS_TXF_METADATA_ALREADY_PRESENT

Transaction metadata is already present on this file and cannot be superseded.

0x80190042

STATUS_TRANSACTION_SCOPE_CALLBACKS_NOT_SET

A transaction scope could not be entered because the scope handler has not been initialized.

0x801B00EB

STATUS_VIDEO_HUNG_DISPLAY_DRIVER_THREAD_RECOVERED

{Display Driver Stopped Responding and recovered} The %hs display driver has stopped working normally. The recovery had been performed.

0x801C0001

STATUS_FLT_BUFFER_TOO_SMALL

{Buffer too small} The buffer is too small to contain the entry. No information has been written to the buffer.

0x80210001

STATUS_FVE_PARTIAL_METADATA

Volume metadata read or write is incomplete.

0x80210002

STATUS_FVE_TRANSIENT_STATE

BitLocker encryption keys were ignored because the volume was in a transient state.

0xC0000001

STATUS_UNSUCCESSFUL

{Operation Failed} The requested operation was unsuccessful.

0xC0000002

STATUS_NOT_IMPLEMENTED

{Not Implemented} The requested operation is not implemented.

0xC0000003

STATUS_INVALID_INFO_CLASS

{Invalid Parameter} The specified information class is not a valid information class for the specified object.

0xC0000004

STATUS_INFO_LENGTH_MISMATCH

The specified information record length does not match the length that is required for the specified information class.

0xC0000005

STATUS_ACCESS_VIOLATION

The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.

0xC0000006

STATUS_IN_PAGE_ERROR

The instruction at 0x%08lx referenced memory at 0x%08lx. The required data was not placed into memory because of an I/O error status of 0x%08lx.

0xC0000007

STATUS_PAGEFILE_QUOTA

The page file quota for the process has been exhausted.

0xC0000008

STATUS_INVALID_HANDLE

An invalid HANDLE was specified.

0xC0000009

STATUS_BAD_INITIAL_STACK

An invalid initial stack was specified in a call to NtCreateThread.

0xC000000A

STATUS_BAD_INITIAL_PC

An invalid initial start address was specified in a call to NtCreateThread.

0xC000000B

STATUS_INVALID_CID

An invalid client ID was specified.

0xC000000C

STATUS_TIMER_NOT_CANCELED

An attempt was made to cancel or set a timer that has an associated APC and the specified thread is not the thread that originally set the timer with an associated APC routine.

0xC000000D

STATUS_INVALID_PARAMETER

An invalid parameter was passed to a service or function.

0xC000000E

STATUS_NO_SUCH_DEVICE

A device that does not exist was specified.

0xC000000F

STATUS_NO_SUCH_FILE

{File Not Found} The file %hs does not exist.

0xC0000010

STATUS_INVALID_DEVICE_REQUEST

The specified request is not a valid operation for the target device.

0xC0000011

STATUS_END_OF_FILE

The end-of-file marker has been reached. There is no valid data in the file beyond this marker.

0xC0000012

STATUS_WRONG_VOLUME

{Wrong Volume} The wrong volume is in the drive. Insert volume %hs into drive %hs.

0xC0000013

STATUS_NO_MEDIA_IN_DEVICE

{No Disk} There is no disk in the drive. Insert a disk into drive %hs.

0xC0000014

STATUS_UNRECOGNIZED_MEDIA

{Unknown Disk Format} The disk in drive %hs is not formatted properly. Check the disk, and reformat it, if needed.

0xC0000015

STATUS_NONEXISTENT_SECTOR

{Sector Not Found} The specified sector does not exist.

0xC0000016

STATUS_MORE_PROCESSING_REQUIRED

{Still Busy} The specified I/O request packet (IRP) cannot be disposed of because the I/O operation is not complete.

0xC0000017

STATUS_NO_MEMORY

{Not Enough Quota} Not enough virtual memory or paging file quota is available to complete the specified operation.

0xC0000018

STATUS_CONFLICTING_ADDRESSES

{Conflicting Address Range} The specified address range conflicts with the address space.

0xC0000019

STATUS_NOT_MAPPED_VIEW

The address range to unmap is not a mapped view.

0xC000001A

STATUS_UNABLE_TO_FREE_VM

The virtual memory cannot be freed.

0xC000001B

STATUS_UNABLE_TO_DELETE_SECTION

The specified section cannot be deleted.

0xC000001C

STATUS_INVALID_SYSTEM_SERVICE

An invalid system service was specified in a system service call.

0xC000001D

STATUS_ILLEGAL_INSTRUCTION

{EXCEPTION} Illegal Instruction An attempt was made to execute an illegal instruction.

0xC000001E

STATUS_INVALID_LOCK_SEQUENCE

{Invalid Lock Sequence} An attempt was made to execute an invalid lock sequence.

0xC000001F

STATUS_INVALID_VIEW_SIZE

{Invalid Mapping} An attempt was made to create a view for a section that is bigger than the section.

0xC0000020

STATUS_INVALID_FILE_FOR_SECTION

{Bad File} The attributes of the specified mapping file for a section of memory cannot be read.

0xC0000021

STATUS_ALREADY_COMMITTED

{Already Committed} The specified address range is already committed.

0xC0000022

STATUS_ACCESS_DENIED

{Access Denied} A process has requested access to an object but has not been granted those access rights.

0xC0000023

STATUS_BUFFER_TOO_SMALL

{Buffer Too Small} The buffer is too small to contain the entry. No information has been written to the buffer.

0xC0000024

STATUS_OBJECT_TYPE_MISMATCH

{Wrong Type} There is a mismatch between the type of object that is required by the requested operation and the type of object that is specified in the request.

0xC0000025

STATUS_NONCONTINUABLE_EXCEPTION

{EXCEPTION} Cannot Continue Windows cannot continue from this exception.

0xC0000026

STATUS_INVALID_DISPOSITION

An invalid exception disposition was returned by an exception handler.

0xC0000027

STATUS_UNWIND

Unwind exception code.

0xC0000028

STATUS_BAD_STACK

An invalid or unaligned stack was encountered during an unwind operation.

0xC0000029

STATUS_INVALID_UNWIND_TARGET

An invalid unwind target was encountered during an unwind operation.

0xC000002A

STATUS_NOT_LOCKED

An attempt was made to unlock a page of memory that was not locked.

0xC000002B

STATUS_PARITY_ERROR

A device parity error on an I/O operation.

0xC000002C

STATUS_UNABLE_TO_DECOMMIT_VM

An attempt was made to decommit uncommitted virtual memory.

0xC000002D

STATUS_NOT_COMMITTED

An attempt was made to change the attributes on memory that has not been committed.

0xC000002E

STATUS_INVALID_PORT_ATTRIBUTES

Invalid object attributes specified to NtCreatePort or invalid port attributes specified to NtConnectPort.

0xC000002F

STATUS_PORT_MESSAGE_TOO_LONG

The length of the message that was passed to NtRequestPort or NtRequestWaitReplyPort is longer than the maximum message that is allowed by the port.

0xC0000030

STATUS_INVALID_PARAMETER_MIX

An invalid combination of parameters was specified.

0xC0000031

STATUS_INVALID_QUOTA_LOWER

An attempt was made to lower a quota limit below the current usage.

0xC0000032

STATUS_DISK_CORRUPT_ERROR

{Corrupt Disk} The file system structure on the disk is corrupt and unusable. Run the Chkdsk utility on the volume %hs.

0xC0000033

STATUS_OBJECT_NAME_INVALID

The object name is invalid.

0xC0000034

STATUS_OBJECT_NAME_NOT_FOUND

The object name is not found.

0xC0000035

STATUS_OBJECT_NAME_COLLISION

The object name already exists.

0xC0000037

STATUS_PORT_DISCONNECTED

An attempt was made to send a message to a disconnected communication port.

0xC0000038

STATUS_DEVICE_ALREADY_ATTACHED

An attempt was made to attach to a device that was already attached to another device.

0xC0000039

STATUS_OBJECT_PATH_INVALID

The object path component was not a directory object.

0xC000003A

STATUS_OBJECT_PATH_NOT_FOUND

{Path Not Found} The path %hs does not exist.

0xC000003B

STATUS_OBJECT_PATH_SYNTAX_BAD

The object path component was not a directory object.

0xC000003C

STATUS_DATA_OVERRUN

{Data Overrun} A data overrun error occurred.

0xC000003D

STATUS_DATA_LATE_ERROR

{Data Late} A data late error occurred.

0xC000003E

STATUS_DATA_ERROR

{Data Error} An error occurred in reading or writing data.

0xC000003F

STATUS_CRC_ERROR

{Bad CRC} A cyclic redundancy check (CRC) checksum error occurred.

0xC0000040

STATUS_SECTION_TOO_BIG

{Section Too Large} The specified section is too big to map the file.

0xC0000041

STATUS_PORT_CONNECTION_REFUSED

The NtConnectPort request is refused.

0xC0000042

STATUS_INVALID_PORT_HANDLE

The type of port handle is invalid for the operation that is requested.

0xC0000043

STATUS_SHARING_VIOLATION

A file cannot be opened because the share access flags are incompatible.

0xC0000044

STATUS_QUOTA_EXCEEDED

Insufficient quota exists to complete the operation.

0xC0000045

STATUS_INVALID_PAGE_PROTECTION

The specified page protection was not valid.

0xC0000046

STATUS_MUTANT_NOT_OWNED

An attempt to release a mutant object was made by a thread that was not the owner of the mutant object.

0xC0000047

STATUS_SEMAPHORE_LIMIT_EXCEEDED

An attempt was made to release a semaphore such that its maximum count would have been exceeded.

0xC0000048

STATUS_PORT_ALREADY_SET

An attempt was made to set the DebugPort or ExceptionPort of a process, but a port already exists in the process, or an attempt was made to set the CompletionPort of a file but a port was already set in the file, or an attempt was made to set the associated completion port of an ALPC port but it is already set.

0xC0000049

STATUS_SECTION_NOT_IMAGE

An attempt was made to query image information on a section that does not map an image.

0xC000004A

STATUS_SUSPEND_COUNT_EXCEEDED

An attempt was made to suspend a thread whose suspend count was at its maximum.

0xC000004B

STATUS_THREAD_IS_TERMINATING

An attempt was made to suspend a thread that has begun termination.

0xC000004C

STATUS_BAD_WORKING_SET_LIMIT

An attempt was made to set the working set limit to an invalid value (for example, the minimum greater than maximum).

0xC000004D

STATUS_INCOMPATIBLE_FILE_MAP

A section was created to map a file that is not compatible with an already existing section that maps the same file.

0xC000004E

STATUS_SECTION_PROTECTION

A view to a section specifies a protection that is incompatible with the protection of the initial view.

0xC000004F

STATUS_EAS_NOT_SUPPORTED

An operation involving EAs failed because the file system does not support EAs.

0xC0000050

STATUS_EA_TOO_LARGE

An EA operation failed because the EA set is too large.

0xC0000051

STATUS_NONEXISTENT_EA_ENTRY

An EA operation failed because the name or EA index is invalid.

0xC0000052

STATUS_NO_EAS_ON_FILE

The file for which EAs were requested has no EAs.

0xC0000053

STATUS_EA_CORRUPT_ERROR

The EA is corrupt and cannot be read.

0xC0000054

STATUS_FILE_LOCK_CONFLICT

A requested read/write cannot be granted due to a conflicting file lock.

0xC0000055

STATUS_LOCK_NOT_GRANTED

A requested file lock cannot be granted due to other existing locks.

0xC0000056

STATUS_DELETE_PENDING

A non-close operation has been requested of a file object that has a delete pending.

0xC0000057

STATUS_CTL_FILE_NOT_SUPPORTED

An attempt was made to set the control attribute on a file. This attribute is not supported in the destination file system.

0xC0000058

STATUS_UNKNOWN_REVISION

Indicates a revision number that was encountered or specified is not one that is known by the service. It might be a more recent revision than the service is aware of.

0xC0000059

STATUS_REVISION_MISMATCH

Indicates that two revision levels are incompatible.

0xC000005A

STATUS_INVALID_OWNER

Indicates a particular security ID cannot be assigned as the owner of an object.

0xC000005B

STATUS_INVALID_PRIMARY_GROUP

Indicates a particular security ID cannot be assigned as the primary group of an object.

0xC000005C

STATUS_NO_IMPERSONATION_TOKEN

An attempt has been made to operate on an impersonation token by a thread that is not currently impersonating a client.

0xC000005D

STATUS_CANT_DISABLE_MANDATORY

A mandatory group cannot be disabled.

0xC000005E

STATUS_NO_LOGON_SERVERS

No logon servers are currently available to service the logon request.

0xC000005F

STATUS_NO_SUCH_LOGON_SESSION

A specified logon session does not exist. It might already have been terminated.

0xC0000060

STATUS_NO_SUCH_PRIVILEGE

A specified privilege does not exist.

0xC0000061

STATUS_PRIVILEGE_NOT_HELD

A required privilege is not held by the client.

0xC0000062

STATUS_INVALID_ACCOUNT_NAME

The name provided is not a properly formed account name.

0xC0000063

STATUS_USER_EXISTS

The specified account already exists.

0xC0000064

STATUS_NO_SUCH_USER

The specified account does not exist.

0xC0000065

STATUS_GROUP_EXISTS

The specified group already exists.

0xC0000066

STATUS_NO_SUCH_GROUP

The specified group does not exist.

0xC0000067

STATUS_MEMBER_IN_GROUP

The specified user account is already in the specified group account. Also used to indicate a group cannot be deleted because it contains a member.

0xC0000068

STATUS_MEMBER_NOT_IN_GROUP

The specified user account is not a member of the specified group account.

0xC0000069

STATUS_LAST_ADMIN

Indicates the requested operation would disable or delete the last remaining administration account. This is not allowed to prevent creating a situation in which the system cannot be administrated.

0xC000006A

STATUS_WRONG_PASSWORD

When trying to update a password, this return status indicates that the value provided as the current password is not correct.

0xC000006B

STATUS_ILL_FORMED_PASSWORD

When trying to update a password, this return status indicates that the value provided for the new password contains values that are not allowed in passwords.

0xC000006C

STATUS_PASSWORD_RESTRICTION

When trying to update a password, this status indicates that some password update rule has been violated. For example, the password might not meet length criteria.

0xC000006D

STATUS_LOGON_FAILURE

The attempted logon is invalid. This is either due to a bad username or authentication information.

0xC000006E

STATUS_ACCOUNT_RESTRICTION

Indicates a referenced user name and authentication information are valid, but some user account restriction has prevented successful authentication (such as time-of-day restrictions).

0xC000006F

STATUS_INVALID_LOGON_HOURS

The user account has time restrictions and cannot be logged onto at this time.

0xC0000070

STATUS_INVALID_WORKSTATION

The user account is restricted so that it cannot be used to log on from the source workstation.

0xC0000071

STATUS_PASSWORD_EXPIRED

The user account password has expired.

0xC0000072

STATUS_ACCOUNT_DISABLED

The referenced account is currently disabled and cannot be logged on to.

0xC0000073

STATUS_NONE_MAPPED

None of the information to be translated has been translated.

0xC0000074

STATUS_TOO_MANY_LUIDS_REQUESTED

The number of LUIDs requested cannot be allocated with a single allocation.

0xC0000075

STATUS_LUIDS_EXHAUSTED

Indicates there are no more LUIDs to allocate.

0xC0000076

STATUS_INVALID_SUB_AUTHORITY

Indicates the sub-authority value is invalid for the particular use.

0xC0000077

STATUS_INVALID_ACL

Indicates the ACL structure is not valid.

0xC0000078

STATUS_INVALID_SID

Indicates the SID structure is not valid.

0xC0000079

STATUS_INVALID_SECURITY_DESCR

Indicates the SECURITY_DESCRIPTOR structure is not valid.

0xC000007A

STATUS_PROCEDURE_NOT_FOUND

Indicates the specified procedure address cannot be found in the DLL.

0xC000007B

STATUS_INVALID_IMAGE_FORMAT

{Bad Image} %hs is either not designed to run on Windows or it contains an error. Try installing the program again using the original installation media or contact your system administrator or the software vendor for support.

0xC000007C

STATUS_NO_TOKEN

An attempt was made to reference a token that does not exist. This is typically done by referencing the token that is associated with a thread when the thread is not impersonating a client.

0xC000007D

STATUS_BAD_INHERITANCE_ACL

Indicates that an attempt to build either an inherited ACL or ACE was not successful. This can be caused by a number of things. One of the more probable causes is the replacement of a CreatorId with a SID that did not fit into the ACE or ACL.

0xC000007E

STATUS_RANGE_NOT_LOCKED

The range specified in NtUnlockFile was not locked.

0xC000007F

STATUS_DISK_FULL

An operation failed because the disk was full.

0xC0000080

STATUS_SERVER_DISABLED

The GUID allocation server is disabled at the moment.

0xC0000081

STATUS_SERVER_NOT_DISABLED

The GUID allocation server is enabled at the moment.

0xC0000082

STATUS_TOO_MANY_GUIDS_REQUESTED

Too many GUIDs were requested from the allocation server at once.

0xC0000083

STATUS_GUIDS_EXHAUSTED

The GUIDs could not be allocated because the Authority Agent was exhausted.

0xC0000084

STATUS_INVALID_ID_AUTHORITY

The value provided was an invalid value for an identifier authority.

0xC0000085

STATUS_AGENTS_EXHAUSTED

No more authority agent values are available for the particular identifier authority value.

0xC0000086

STATUS_INVALID_VOLUME_LABEL

An invalid volume label has been specified.

0xC0000087

STATUS_SECTION_NOT_EXTENDED

A mapped section could not be extended.

0xC0000088

STATUS_NOT_MAPPED_DATA

Specified section to flush does not map a data file.

0xC0000089

STATUS_RESOURCE_DATA_NOT_FOUND

Indicates the specified image file did not contain a resource section.

0xC000008A

STATUS_RESOURCE_TYPE_NOT_FOUND

Indicates the specified resource type cannot be found in the image file.

0xC000008B

STATUS_RESOURCE_NAME_NOT_FOUND

Indicates the specified resource name cannot be found in the image file.

0xC000008C

STATUS_ARRAY_BOUNDS_EXCEEDED

{EXCEPTION} Array bounds exceeded.

0xC000008D

STATUS_FLOAT_DENORMAL_OPERAND

{EXCEPTION} Floating-point denormal operand.

0xC000008E

STATUS_FLOAT_DIVIDE_BY_ZERO

{EXCEPTION} Floating-point division by zero.

0xC000008F

STATUS_FLOAT_INEXACT_RESULT

{EXCEPTION} Floating-point inexact result.

0xC0000090

STATUS_FLOAT_INVALID_OPERATION

{EXCEPTION} Floating-point invalid operation.

0xC0000091

STATUS_FLOAT_OVERFLOW

{EXCEPTION} Floating-point overflow.

0xC0000092

STATUS_FLOAT_STACK_CHECK

{EXCEPTION} Floating-point stack check.

0xC0000093

STATUS_FLOAT_UNDERFLOW

{EXCEPTION} Floating-point underflow.

0xC0000094

STATUS_INTEGER_DIVIDE_BY_ZERO

{EXCEPTION} Integer division by zero.

0xC0000095

STATUS_INTEGER_OVERFLOW

{EXCEPTION} Integer overflow.

0xC0000096

STATUS_PRIVILEGED_INSTRUCTION

{EXCEPTION} Privileged instruction.

0xC0000097

STATUS_TOO_MANY_PAGING_FILES

An attempt was made to install more paging files than the system supports.

0xC0000098

STATUS_FILE_INVALID

The volume for a file has been externally altered such that the opened file is no longer valid.

0xC0000099

STATUS_ALLOTTED_SPACE_EXCEEDED

When a block of memory is allotted for future updates, such as the memory allocated to hold discretionary access control and primary group information, successive updates might exceed the amount of memory originally allotted. Because a quota might already have been charged to several processes that have handles to the object, it is not reasonable to alter the size of the allocated memory. Instead, a request that requires more memory than has been allotted must fail and the STATUS_ALLOTTED_SPACE_EXCEEDED error returned.

0xC000009A

STATUS_INSUFFICIENT_RESOURCES

Insufficient system resources exist to complete the API.

0xC000009B

STATUS_DFS_EXIT_PATH_FOUND

An attempt has been made to open a DFS exit path control file.

0xC000009C

STATUS_DEVICE_DATA_ERROR

There are bad blocks (sectors) on the hard disk.

0xC000009D

STATUS_DEVICE_NOT_CONNECTED

There is bad cabling, non-termination, or the controller is not able to obtain access to the hard disk.

0xC000009F

STATUS_FREE_VM_NOT_AT_BASE

Virtual memory cannot be freed because the base address is not the base of the region and a region size of zero was specified.

0xC00000A0

STATUS_MEMORY_NOT_ALLOCATED

An attempt was made to free virtual memory that is not allocated.

0xC00000A1

STATUS_WORKING_SET_QUOTA

The working set is not big enough to allow the requested pages to be locked.

0xC00000A2

STATUS_MEDIA_WRITE_PROTECTED

{Write Protect Error} The disk cannot be written to because it is write-protected. Remove the write protection from the volume %hs in drive %hs.

0xC00000A3

STATUS_DEVICE_NOT_READY

{Drive Not Ready} The drive is not ready for use; its door might be open. Check drive %hs and make sure that a disk is inserted and that the drive door is closed.

0xC00000A4

STATUS_INVALID_GROUP_ATTRIBUTES

The specified attributes are invalid or are incompatible with the attributes for the group as a whole.

0xC00000A5

STATUS_BAD_IMPERSONATION_LEVEL

A specified impersonation level is invalid. Also used to indicate that a required impersonation level was not provided.

0xC00000A6

STATUS_CANT_OPEN_ANONYMOUS

An attempt was made to open an anonymous-level token. Anonymous tokens cannot be opened.

0xC00000A7

STATUS_BAD_VALIDATION_CLASS

The validation information class requested was invalid.

0xC00000A8

STATUS_BAD_TOKEN_TYPE

The type of a token object is inappropriate for its attempted use.

0xC00000A9

STATUS_BAD_MASTER_BOOT_RECORD

The type of a token object is inappropriate for its attempted use.

0xC00000AA

STATUS_INSTRUCTION_MISALIGNMENT

An attempt was made to execute an instruction at an unaligned address and the host system does not support unaligned instruction references.

0xC00000AB

STATUS_INSTANCE_NOT_AVAILABLE

The maximum named pipe instance count has been reached.

0xC00000AC

STATUS_PIPE_NOT_AVAILABLE

An instance of a named pipe cannot be found in the listening state.

0xC00000AD

STATUS_INVALID_PIPE_STATE

The named pipe is not in the connected or closing state.

0xC00000AE

STATUS_PIPE_BUSY

The specified pipe is set to complete operations and there are current I/O operations queued so that it cannot be changed to queue operations.

0xC00000AF

STATUS_ILLEGAL_FUNCTION

The specified handle is not open to the server end of the named pipe.

0xC00000B0

STATUS_PIPE_DISCONNECTED

The specified named pipe is in the disconnected state.

0xC00000B1

STATUS_PIPE_CLOSING

The specified named pipe is in the closing state.

0xC00000B2

STATUS_PIPE_CONNECTED

The specified named pipe is in the connected state.

0xC00000B3

STATUS_PIPE_LISTENING

The specified named pipe is in the listening state.

0xC00000B4

STATUS_INVALID_READ_MODE

The specified named pipe is not in message mode.

0xC00000B5

STATUS_IO_TIMEOUT

{Device Timeout} The specified I/O operation on %hs was not completed before the time-out period expired.

0xC00000B6

STATUS_FILE_FORCED_CLOSED

The specified file has been closed by another process.

0xC00000B7

STATUS_PROFILING_NOT_STARTED

Profiling is not started.

0xC00000B8

STATUS_PROFILING_NOT_STOPPED

Profiling is not stopped.

0xC00000B9

STATUS_COULD_NOT_INTERPRET

The passed ACL did not contain the minimum required information.

0xC00000BA

STATUS_FILE_IS_A_DIRECTORY

The file that was specified as a target is a directory, and the caller specified that it could be anything but a directory.

0xC00000BB

STATUS_NOT_SUPPORTED

The request is not supported.

0xC00000BC

STATUS_REMOTE_NOT_LISTENING

This remote computer is not listening.

0xC00000BD

STATUS_DUPLICATE_NAME

A duplicate name exists on the network.

0xC00000BE

STATUS_BAD_NETWORK_PATH

The network path cannot be located.

0xC00000BF

STATUS_NETWORK_BUSY

The network is busy.

0xC00000C0

STATUS_DEVICE_DOES_NOT_EXIST

This device does not exist.

0xC00000C1

STATUS_TOO_MANY_COMMANDS

The network BIOS command limit has been reached.

0xC00000C2

STATUS_ADAPTER_HARDWARE_ERROR

An I/O adapter hardware error has occurred.

0xC00000C3

STATUS_INVALID_NETWORK_RESPONSE

The network responded incorrectly.

0xC00000C4

STATUS_UNEXPECTED_NETWORK_ERROR

An unexpected network error occurred.

0xC00000C5

STATUS_BAD_REMOTE_ADAPTER

The remote adapter is not compatible.

0xC00000C6

STATUS_PRINT_QUEUE_FULL

The print queue is full.

0xC00000C7

STATUS_NO_SPOOL_SPACE

Space to store the file that is waiting to be printed is not available on the server.

0xC00000C8

STATUS_PRINT_CANCELLED

The requested print file has been canceled.

0xC00000C9

STATUS_NETWORK_NAME_DELETED

The network name was deleted.

0xC00000CA

STATUS_NETWORK_ACCESS_DENIED

Network access is denied.

0xC00000CB

STATUS_BAD_DEVICE_TYPE

{Incorrect Network Resource Type} The specified device type (LPT, for example) conflicts with the actual device type on the remote resource.

0xC00000CC

STATUS_BAD_NETWORK_NAME

{Network Name Not Found} The specified share name cannot be found on the remote server.

0xC00000CD

STATUS_TOO_MANY_NAMES

The name limit for the network adapter card of the local computer was exceeded.

0xC00000CE

STATUS_TOO_MANY_SESSIONS

The network BIOS session limit was exceeded.

0xC00000CF

STATUS_SHARING_PAUSED

File sharing has been temporarily paused.

0xC00000D0

STATUS_REQUEST_NOT_ACCEPTED

No more connections can be made to this remote computer at this time because the computer has already accepted the maximum number of connections.

0xC00000D1

STATUS_REDIRECTOR_PAUSED

Print or disk redirection is temporarily paused.

0xC00000D2

STATUS_NET_WRITE_FAULT

A network data fault occurred.

0xC00000D3

STATUS_PROFILING_AT_LIMIT

The number of active profiling objects is at the maximum and no more can be started.

0xC00000D4

STATUS_NOT_SAME_DEVICE

{Incorrect Volume} The destination file of a rename request is located on a different device than the source of the rename request.

0xC00000D5

STATUS_FILE_RENAMED

The specified file has been renamed and thus cannot be modified.

0xC00000D6

STATUS_VIRTUAL_CIRCUIT_CLOSED

{Network Request Timeout} The session with a remote server has been disconnected because the time-out interval for a request has expired.

0xC00000D7

STATUS_NO_SECURITY_ON_OBJECT

Indicates an attempt was made to operate on the security of an object that does not have security associated with it.

0xC00000D8

STATUS_CANT_WAIT

Used to indicate that an operation cannot continue without blocking for I/O.

0xC00000D9

STATUS_PIPE_EMPTY

Used to indicate that a read operation was done on an empty pipe.

0xC00000DA

STATUS_CANT_ACCESS_DOMAIN_INFO

Configuration information could not be read from the domain controller, either because the machine is unavailable or access has been denied.

0xC00000DB

STATUS_CANT_TERMINATE_SELF

Indicates that a thread attempted to terminate itself by default (called NtTerminateThread with NULL) and it was the last thread in the current process.

0xC00000DC

STATUS_INVALID_SERVER_STATE

Indicates the Sam Server was in the wrong state to perform the desired operation.

0xC00000DD

STATUS_INVALID_DOMAIN_STATE

Indicates the domain was in the wrong state to perform the desired operation.

0xC00000DE

STATUS_INVALID_DOMAIN_ROLE

This operation is only allowed for the primary domain controller of the domain.

0xC00000DF

STATUS_NO_SUCH_DOMAIN

The specified domain did not exist.

0xC00000E0

STATUS_DOMAIN_EXISTS

The specified domain already exists.

0xC00000E1

STATUS_DOMAIN_LIMIT_EXCEEDED

An attempt was made to exceed the limit on the number of domains per server for this release.

0xC00000E2

STATUS_OPLOCK_NOT_GRANTED

An error status returned when the opportunistic lock (oplock) request is denied.

0xC00000E3

STATUS_INVALID_OPLOCK_PROTOCOL

An error status returned when an invalid opportunistic lock (oplock) acknowledgment is received by a file system.

0xC00000E4

STATUS_INTERNAL_DB_CORRUPTION

This error indicates that the requested operation cannot be completed due to a catastrophic media failure or an on-disk data structure corruption.

0xC00000E5

STATUS_INTERNAL_ERROR

An internal error occurred.

0xC00000E6

STATUS_GENERIC_NOT_MAPPED

Indicates generic access types were contained in an access mask which should already be mapped to non-generic access types.

0xC00000E7

STATUS_BAD_DESCRIPTOR_FORMAT

Indicates a security descriptor is not in the necessary format (absolute or self-relative).

0xC00000E8

STATUS_INVALID_USER_BUFFER

An access to a user buffer failed at an expected point in time. This code is defined because the caller does not want to accept STATUS_ACCESS_VIOLATION in its filter.

0xC00000E9

STATUS_UNEXPECTED_IO_ERROR

If an I/O error that is not defined in the standard FsRtl filter is returned, it is converted to the following error, which is guaranteed to be in the filter. In this case, information is lost; however, the filter correctly handles the exception.

0xC00000EA

STATUS_UNEXPECTED_MM_CREATE_ERR

If an MM error that is not defined in the standard FsRtl filter is returned, it is converted to one of the following errors, which are guaranteed to be in the filter. In this case, information is lost; however, the filter correctly handles the exception.

0xC00000EB

STATUS_UNEXPECTED_MM_MAP_ERROR

If an MM error that is not defined in the standard FsRtl filter is returned, it is converted to one of the following errors, which are guaranteed to be in the filter. In this case, information is lost; however, the filter correctly handles the exception.

0xC00000EC

STATUS_UNEXPECTED_MM_EXTEND_ERR

If an MM error that is not defined in the standard FsRtl filter is returned, it is converted to one of the following errors, which are guaranteed to be in the filter. In this case, information is lost; however, the filter correctly handles the exception.

0xC00000ED

STATUS_NOT_LOGON_PROCESS

The requested action is restricted for use by logon processes only. The calling process has not registered as a logon process.

0xC00000EE

STATUS_LOGON_SESSION_EXISTS

An attempt has been made to start a new session manager or LSA logon session by using an ID that is already in use.

0xC00000EF

STATUS_INVALID_PARAMETER_1

An invalid parameter was passed to a service or function as the first argument.

0xC00000F0

STATUS_INVALID_PARAMETER_2

An invalid parameter was passed to a service or function as the second argument.

0xC00000F1

STATUS_INVALID_PARAMETER_3

An invalid parameter was passed to a service or function as the third argument.

0xC00000F2

STATUS_INVALID_PARAMETER_4

An invalid parameter was passed to a service or function as the fourth argument.

0xC00000F3

STATUS_INVALID_PARAMETER_5

An invalid parameter was passed to a service or function as the fifth argument.

0xC00000F4

STATUS_INVALID_PARAMETER_6

An invalid parameter was passed to a service or function as the sixth argument.

0xC00000F5

STATUS_INVALID_PARAMETER_7

An invalid parameter was passed to a service or function as the seventh argument.

0xC00000F6

STATUS_INVALID_PARAMETER_8

An invalid parameter was passed to a service or function as the eighth argument.

0xC00000F7

STATUS_INVALID_PARAMETER_9

An invalid parameter was passed to a service or function as the ninth argument.

0xC00000F8

STATUS_INVALID_PARAMETER_10

An invalid parameter was passed to a service or function as the tenth argument.

0xC00000F9

STATUS_INVALID_PARAMETER_11

An invalid parameter was passed to a service or function as the eleventh argument.

0xC00000FA

STATUS_INVALID_PARAMETER_12

An invalid parameter was passed to a service or function as the twelfth argument.

0xC00000FB

STATUS_REDIRECTOR_NOT_STARTED

An attempt was made to access a network file, but the network software was not yet started.

0xC00000FC

STATUS_REDIRECTOR_STARTED

An attempt was made to start the redirector, but the redirector has already been started.

0xC00000FD

STATUS_STACK_OVERFLOW

A new guard page for the stack cannot be created.

0xC00000FE

STATUS_NO_SUCH_PACKAGE

A specified authentication package is unknown.

0xC00000FF

STATUS_BAD_FUNCTION_TABLE

A malformed function table was encountered during an unwind operation.

0xC0000100

STATUS_VARIABLE_NOT_FOUND

Indicates the specified environment variable name was not found in the specified environment block.

0xC0000101

STATUS_DIRECTORY_NOT_EMPTY

Indicates that the directory trying to be deleted is not empty.

0xC0000102

STATUS_FILE_CORRUPT_ERROR

{Corrupt File} The file or directory %hs is corrupt and unreadable. Run the Chkdsk utility.

0xC0000103

STATUS_NOT_A_DIRECTORY

A requested opened file is not a directory.

0xC0000104

STATUS_BAD_LOGON_SESSION_STATE

The logon session is not in a state that is consistent with the requested operation.

0xC0000105

STATUS_LOGON_SESSION_COLLISION

An internal LSA error has occurred. An authentication package has requested the creation of a logon session but the ID of an already existing logon session has been specified.

0xC0000106

STATUS_NAME_TOO_LONG

A specified name string is too long for its intended use.

0xC0000107

STATUS_FILES_OPEN

The user attempted to force close the files on a redirected drive, but there were opened files on the drive, and the user did not specify a sufficient level of force.

0xC0000108

STATUS_CONNECTION_IN_USE

The user attempted to force close the files on a redirected drive, but there were opened directories on the drive, and the user did not specify a sufficient level of force.

0xC0000109

STATUS_MESSAGE_NOT_FOUND

RtlFindMessage could not locate the requested message ID in the message table resource.

0xC000010A

STATUS_PROCESS_IS_TERMINATING

An attempt was made to duplicate an object handle into or out of an exiting process.

0xC000010B

STATUS_INVALID_LOGON_TYPE

Indicates an invalid value has been provided for the LogonType requested.

0xC000010C

STATUS_NO_GUID_TRANSLATION

Indicates that an attempt was made to assign protection to a file system file or directory and one of the SIDs in the security descriptor could not be translated into a GUID that could be stored by the file system. This causes the protection attempt to fail, which might cause a file creation attempt to fail.

0xC000010D

STATUS_CANNOT_IMPERSONATE

Indicates that an attempt has been made to impersonate via a named pipe that has not yet been read from.

0xC000010E

STATUS_IMAGE_ALREADY_LOADED

Indicates that the specified image is already loaded.

0xC0000117

STATUS_NO_LDT

Indicates that an attempt was made to change the size of the LDT for a process that has no LDT.

0xC0000118

STATUS_INVALID_LDT_SIZE

Indicates that an attempt was made to grow an LDT by setting its size, or that the size was not an even number of selectors.

0xC0000119

STATUS_INVALID_LDT_OFFSET

Indicates that the starting value for the LDT information was not an integral multiple of the selector size.

0xC000011A

STATUS_INVALID_LDT_DESCRIPTOR

Indicates that the user supplied an invalid descriptor when trying to set up LDT descriptors.

0xC000011B

STATUS_INVALID_IMAGE_NE_FORMAT

The specified image file did not have the correct format. It appears to be NE format.

0xC000011C

STATUS_RXACT_INVALID_STATE

Indicates that the transaction state of a registry subtree is incompatible with the requested operation. For example, a request has been made to start a new transaction with one already in progress, or a request has been made to apply a transaction when one is not currently in progress.

0xC000011D

STATUS_RXACT_COMMIT_FAILURE

Indicates an error has occurred during a registry transaction commit. The database has been left in an unknown, but probably inconsistent, state. The state of the registry transaction is left as COMMITTING.

0xC000011E

STATUS_MAPPED_FILE_SIZE_ZERO

An attempt was made to map a file of size zero with the maximum size specified as zero.

0xC000011F

STATUS_TOO_MANY_OPENED_FILES

Too many files are opened on a remote server. This error should only be returned by the Windows redirector on a remote drive.

0xC0000120

STATUS_CANCELLED

The I/O request was canceled.

0xC0000121

STATUS_CANNOT_DELETE

An attempt has been made to remove a file or directory that cannot be deleted.

0xC0000122

STATUS_INVALID_COMPUTER_NAME

Indicates a name that was specified as a remote computer name is syntactically invalid.

0xC0000123

STATUS_FILE_DELETED

An I/O request other than close was performed on a file after it was deleted, which can only happen to a request that did not complete before the last handle was closed via NtClose.

0xC0000124

STATUS_SPECIAL_ACCOUNT

Indicates an operation that is incompatible with built-in accounts has been attempted on a built-in (special) SAM account. For example, built-in accounts cannot be deleted.

0xC0000125

STATUS_SPECIAL_GROUP

The operation requested cannot be performed on the specified group because it is a built-in special group.

0xC0000126

STATUS_SPECIAL_USER

The operation requested cannot be performed on the specified user because it is a built-in special user.

0xC0000127

STATUS_MEMBERS_PRIMARY_GROUP

Indicates a member cannot be removed from a group because the group is currently the member's primary group.

0xC0000128

STATUS_FILE_CLOSED

An I/O request other than close and several other special case operations was attempted using a file object that had already been closed.

0xC0000129

STATUS_TOO_MANY_THREADS

Indicates a process has too many threads to perform the requested action. For example, assignment of a primary token can be performed only when a process has zero or one threads.

0xC000012A

STATUS_THREAD_NOT_IN_PROCESS

An attempt was made to operate on a thread within a specific process, but the specified thread is not in the specified process.

0xC000012B

STATUS_TOKEN_ALREADY_IN_USE

An attempt was made to establish a token for use as a primary token but the token is already in use. A token can only be the primary token of one process at a time.

0xC000012C

STATUS_PAGEFILE_QUOTA_EXCEEDED

The page file quota was exceeded.

0xC000012D

STATUS_COMMITMENT_LIMIT

{Out of Virtual Memory} Your system is low on virtual memory. To ensure that Windows runs correctly, increase the size of your virtual memory paging file. For more information, see Help.

0xC000012E

STATUS_INVALID_IMAGE_LE_FORMAT

The specified image file did not have the correct format: it appears to be LE format.

0xC000012F

STATUS_INVALID_IMAGE_NOT_MZ

The specified image file did not have the correct format: it did not have an initial MZ.

0xC0000130

STATUS_INVALID_IMAGE_PROTECT

The specified image file did not have the correct format: it did not have a proper e_lfarlc in the MZ header.

0xC0000131

STATUS_INVALID_IMAGE_WIN_16

The specified image file did not have the correct format: it appears to be a 16-bit Windows image.

0xC0000132

STATUS_LOGON_SERVER_CONFLICT

The Netlogon service cannot start because another Netlogon service running in the domain conflicts with the specified role.

0xC0000133

STATUS_TIME_DIFFERENCE_AT_DC

The time at the primary domain controller is different from the time at the backup domain controller or member server by too large an amount.

0xC0000134

STATUS_SYNCHRONIZATION_REQUIRED

On applicable Windows Server releases, the SAM database is significantly out of synchronization with the copy on the domain controller. A complete synchronization is required.

0xC0000135

STATUS_DLL_NOT_FOUND

{Unable To Locate Component} This application has failed to start because %hs was not found. Reinstalling the application might fix this problem.

0xC0000136

STATUS_OPEN_FAILED

The NtCreateFile API failed. This error should never be returned to an application; it is a place holder for the Windows LAN Manager Redirector to use in its internal error-mapping routines.

0xC0000137

STATUS_IO_PRIVILEGE_FAILED

{Privilege Failed} The I/O permissions for the process could not be changed.

0xC0000138

STATUS_ORDINAL_NOT_FOUND

{Ordinal Not Found} The ordinal %ld could not be located in the dynamic link library %hs.

0xC0000139

STATUS_ENTRYPOINT_NOT_FOUND

{Entry Point Not Found} The procedure entry point %hs could not be located in the dynamic link library %hs.

0xC000013A

STATUS_CONTROL_C_EXIT

{Application Exit by CTRL+C} The application terminated as a result of a CTRL+C.

0xC000013B

STATUS_LOCAL_DISCONNECT

{Virtual Circuit Closed} The network transport on your computer has closed a network connection. There might or might not be I/O requests outstanding.

0xC000013C

STATUS_REMOTE_DISCONNECT

{Virtual Circuit Closed} The network transport on a remote computer has closed a network connection. There might or might not be I/O requests outstanding.

0xC000013D

STATUS_REMOTE_RESOURCES

{Insufficient Resources on Remote Computer} The remote computer has insufficient resources to complete the network request. For example, the remote computer might not have enough available memory to carry out the request at this time.

0xC000013E

STATUS_LINK_FAILED

{Virtual Circuit Closed} An existing connection (virtual circuit) has been broken at the remote computer. There is probably something wrong with the network software protocol or the network hardware on the remote computer.

0xC000013F

STATUS_LINK_TIMEOUT

{Virtual Circuit Closed} The network transport on your computer has closed a network connection because it had to wait too long for a response from the remote computer.

0xC0000140

STATUS_INVALID_CONNECTION

The connection handle that was given to the transport was invalid.

0xC0000141

STATUS_INVALID_ADDRESS

The address handle that was given to the transport was invalid.

0xC0000142

STATUS_DLL_INIT_FAILED

{DLL Initialization Failed} Initialization of the dynamic link library %hs failed. The process is terminating abnormally.

0xC0000143

STATUS_MISSING_SYSTEMFILE

{Missing System File} The required system file %hs is bad or missing.

0xC0000144

STATUS_UNHANDLED_EXCEPTION

{Application Error} The exception %s (0x%08lx) occurred in the application at location 0x%08lx.

0xC0000145

STATUS_APP_INIT_FAILURE

{Application Error} The application failed to initialize properly (0x%lx). Click OK to terminate the application.

0xC0000146

STATUS_PAGEFILE_CREATE_FAILED

{Unable to Create Paging File} The creation of the paging file %hs failed (%lx). The requested size was %ld.

0xC0000147

STATUS_NO_PAGEFILE

{No Paging File Specified} No paging file was specified in the system configuration.

0xC0000148

STATUS_INVALID_LEVEL

{Incorrect System Call Level} An invalid level was passed into the specified system call.

0xC0000149

STATUS_WRONG_PASSWORD_CORE

{Incorrect Password to LAN Manager Server} You specified an incorrect password to a LAN Manager 2.x or MS-NET server.

0xC000014A

STATUS_ILLEGAL_FLOAT_CONTEXT

{EXCEPTION} A real-mode application issued a floating-point instruction and floating-point hardware is not present.

0xC000014B

STATUS_PIPE_BROKEN

The pipe operation has failed because the other end of the pipe has been closed.

0xC000014C

STATUS_REGISTRY_CORRUPT

{The Registry Is Corrupt} The structure of one of the files that contains registry data is corrupt; the image of the file in memory is corrupt; or the file could not be recovered because the alternate copy or log was absent or corrupt.

0xC000014D

STATUS_REGISTRY_IO_FAILED

An I/O operation initiated by the Registry failed and cannot be recovered. The registry could not read in, write out, or flush one of the files that contain the system's image of the registry.

0xC000014E

STATUS_NO_EVENT_PAIR

An event pair synchronization operation was performed using the thread-specific client/server event pair object, but no event pair object was associated with the thread.

0xC000014F

STATUS_UNRECOGNIZED_VOLUME

The volume does not contain a recognized file system. Be sure that all required file system drivers are loaded and that the volume is not corrupt.

0xC0000150

STATUS_SERIAL_NO_DEVICE_INITED

No serial device was successfully initialized. The serial driver will unload.

0xC0000151

STATUS_NO_SUCH_ALIAS

The specified local group does not exist.

0xC0000152

STATUS_MEMBER_NOT_IN_ALIAS

The specified account name is not a member of the group.

0xC0000153

STATUS_MEMBER_IN_ALIAS

The specified account name is already a member of the group.

0xC0000154

STATUS_ALIAS_EXISTS

The specified local group already exists.

0xC0000155

STATUS_LOGON_NOT_GRANTED

A requested type of logon (for example, interactive, network, and service) is not granted by the local security policy of the target system. Ask the system administrator to grant the necessary form of logon.

0xC0000156

STATUS_TOO_MANY_SECRETS

The maximum number of secrets that can be stored in a single system was exceeded. The length and number of secrets is limited to satisfy U.S. State Department export restrictions.

0xC0000157

STATUS_SECRET_TOO_LONG

The length of a secret exceeds the maximum allowable length. The length and number of secrets is limited to satisfy U.S. State Department export restrictions.

0xC0000158

STATUS_INTERNAL_DB_ERROR

The local security authority (LSA) database contains an internal inconsistency.

0xC0000159

STATUS_FULLSCREEN_MODE

The requested operation cannot be performed in full-screen mode.

0xC000015A

STATUS_TOO_MANY_CONTEXT_IDS

During a logon attempt, the user's security context accumulated too many security IDs. This is a very unusual situation. Remove the user from some global or local groups to reduce the number of security IDs to incorporate into the security context.

0xC000015B

STATUS_LOGON_TYPE_NOT_GRANTED

A user has requested a type of logon (for example, interactive or network) that has not been granted. An administrator has control over who can logon interactively and through the network.

0xC000015C

STATUS_NOT_REGISTRY_FILE

The system has attempted to load or restore a file into the registry, and the specified file is not in the format of a registry file.

0xC000015D

STATUS_NT_CROSS_ENCRYPTION_REQUIRED

An attempt was made to change a user password in the security account manager without providing the necessary Windows cross-encrypted password.

0xC000015E

STATUS_DOMAIN_CTRLR_CONFIG_ERROR

A domain server has an incorrect configuration.

0xC000015F

STATUS_FT_MISSING_MEMBER

An attempt was made to explicitly access the secondary copy of information via a device control to the fault tolerance driver and the secondary copy is not present in the system.

0xC0000160

STATUS_ILL_FORMED_SERVICE_ENTRY

A configuration registry node that represents a driver service entry was ill-formed and did not contain the required value entries.

0xC0000161

STATUS_ILLEGAL_CHARACTER

An illegal character was encountered. For a multibyte character set, this includes a lead byte without a succeeding trail byte. For the Unicode character set this includes the characters 0xFFFF and 0xFFFE.

0xC0000162

STATUS_UNMAPPABLE_CHARACTER

No mapping for the Unicode character exists in the target multibyte code page.

0xC0000163

STATUS_UNDEFINED_CHARACTER

The Unicode character is not defined in the Unicode character set that is installed on the system.

0xC0000164

STATUS_FLOPPY_VOLUME

The paging file cannot be created on a floppy disk.

0xC0000165

STATUS_FLOPPY_ID_MARK_NOT_FOUND

{Floppy Disk Error} While accessing a floppy disk, an ID address mark was not found.

0xC0000166

STATUS_FLOPPY_WRONG_CYLINDER

{Floppy Disk Error} While accessing a floppy disk, the track address from the sector ID field was found to be different from the track address that is maintained by the controller.

0xC0000167

STATUS_FLOPPY_UNKNOWN_ERROR

{Floppy Disk Error} The floppy disk controller reported an error that is not recognized by the floppy disk driver.

0xC0000168

STATUS_FLOPPY_BAD_REGISTERS

{Floppy Disk Error} While accessing a floppy-disk, the controller returned inconsistent results via its registers.

0xC0000169

STATUS_DISK_RECALIBRATE_FAILED

{Hard Disk Error} While accessing the hard disk, a recalibrate operation failed, even after retries.

0xC000016A

STATUS_DISK_OPERATION_FAILED

{Hard Disk Error} While accessing the hard disk, a disk operation failed even after retries.

0xC000016B

STATUS_DISK_RESET_FAILED

{Hard Disk Error} While accessing the hard disk, a disk controller reset was needed, but even that failed.

0xC000016C

STATUS_SHARED_IRQ_BUSY

An attempt was made to open a device that was sharing an interrupt request (IRQ) with other devices. At least one other device that uses that IRQ was already opened. Two concurrent opens of devices that share an IRQ and only work via interrupts is not supported for the particular bus type that the devices use.

0xC000016D

STATUS_FT_ORPHANING

{FT Orphaning} A disk that is part of a fault-tolerant volume can no longer be accessed.

0xC000016E

STATUS_BIOS_FAILED_TO_CONNECT_INTERRUPT

The basic input/output system (BIOS) failed to connect a system interrupt to the device or bus for which the device is connected.

0xC0000172

STATUS_PARTITION_FAILURE

The tape could not be partitioned.

0xC0000173

STATUS_INVALID_BLOCK_LENGTH

When accessing a new tape of a multi-volume partition, the current blocksize is incorrect.

0xC0000174

STATUS_DEVICE_NOT_PARTITIONED

The tape partition information could not be found when loading a tape.

0xC0000175

STATUS_UNABLE_TO_LOCK_MEDIA

An attempt to lock the eject media mechanism failed.

0xC0000176

STATUS_UNABLE_TO_UNLOAD_MEDIA

An attempt to unload media failed.

0xC0000177

STATUS_EOM_OVERFLOW

The physical end of tape was detected.

0xC0000178

STATUS_NO_MEDIA

{No Media} There is no media in the drive. Insert media into drive %hs.

0xC000017A

STATUS_NO_SUCH_MEMBER

A member could not be added to or removed from the local group because the member does not exist.

0xC000017B

STATUS_INVALID_MEMBER

A new member could not be added to a local group because the member has the wrong account type.

0xC000017C

STATUS_KEY_DELETED

An illegal operation was attempted on a registry key that has been marked for deletion.

0xC000017D

STATUS_NO_LOG_SPACE

The system could not allocate the required space in a registry log.

0xC000017E

STATUS_TOO_MANY_SIDS

Too many SIDs have been specified.

0xC000017F

STATUS_LM_CROSS_ENCRYPTION_REQUIRED

An attempt was made to change a user password in the security account manager without providing the necessary LM cross-encrypted password.

0xC0000180

STATUS_KEY_HAS_CHILDREN

An attempt was made to create a symbolic link in a registry key that already has subkeys or values.

0xC0000181

STATUS_CHILD_MUST_BE_VOLATILE

An attempt was made to create a stable subkey under a volatile parent key.

0xC0000182

STATUS_DEVICE_CONFIGURATION_ERROR

The I/O device is configured incorrectly or the configuration parameters to the driver are incorrect.

0xC0000183

STATUS_DRIVER_INTERNAL_ERROR

An error was detected between two drivers or within an I/O driver.

0xC0000184

STATUS_INVALID_DEVICE_STATE

The device is not in a valid state to perform this request.

0xC0000185

STATUS_IO_DEVICE_ERROR

The I/O device reported an I/O error.

0xC0000186

STATUS_DEVICE_PROTOCOL_ERROR

A protocol error was detected between the driver and the device.

0xC0000187

STATUS_BACKUP_CONTROLLER

This operation is only allowed for the primary domain controller of the domain.

0xC0000188

STATUS_LOG_FILE_FULL

The log file space is insufficient to support this operation.

0xC0000189

STATUS_TOO_LATE

A write operation was attempted to a volume after it was dismounted.

0xC000018A

STATUS_NO_TRUST_LSA_SECRET

The workstation does not have a trust secret for the primary domain in the local LSA database.

0xC000018B

STATUS_NO_TRUST_SAM_ACCOUNT

On applicable Windows Server releases, the SAM database does not have a computer account for this workstation trust relationship.

0xC000018C

STATUS_TRUSTED_DOMAIN_FAILURE

The logon request failed because the trust relationship between the primary domain and the trusted domain failed.

0xC000018D

STATUS_TRUSTED_RELATIONSHIP_FAILURE

The logon request failed because the trust relationship between this workstation and the primary domain failed.

0xC000018E

STATUS_EVENTLOG_FILE_CORRUPT

The Eventlog log file is corrupt.

0xC000018F

STATUS_EVENTLOG_CANT_START

No Eventlog log file could be opened. The Eventlog service did not start.

0xC0000190

STATUS_TRUST_FAILURE

The network logon failed. This might be because the validation authority cannot be reached.

0xC0000191

STATUS_MUTANT_LIMIT_EXCEEDED

An attempt was made to acquire a mutant such that its maximum count would have been exceeded.

0xC0000192

STATUS_NETLOGON_NOT_STARTED

An attempt was made to logon, but the NetLogon service was not started.

0xC0000193

STATUS_ACCOUNT_EXPIRED

The user account has expired.

0xC0000194

STATUS_POSSIBLE_DEADLOCK

{EXCEPTION} Possible deadlock condition.

0xC0000195

STATUS_NETWORK_CREDENTIAL_CONFLICT

Multiple connections to a server or shared resource by the same user, using more than one user name, are not allowed. Disconnect all previous connections to the server or shared resource and try again.

0xC0000196

STATUS_REMOTE_SESSION_LIMIT

An attempt was made to establish a session to a network server, but there are already too many sessions established to that server.

0xC0000197

STATUS_EVENTLOG_FILE_CHANGED

The log file has changed between reads.

0xC0000198

STATUS_NOLOGON_INTERDOMAIN_TRUST_ACCOUNT

The account used is an interdomain trust account. Use your global user account or local user account to access this server.

0xC0000199

STATUS_NOLOGON_WORKSTATION_TRUST_ACCOUNT

The account used is a computer account. Use your global user account or local user account to access this server.

0xC000019A

STATUS_NOLOGON_SERVER_TRUST_ACCOUNT

The account used is a server trust account. Use your global user account or local user account to access this server.

0xC000019B

STATUS_DOMAIN_TRUST_INCONSISTENT

The name or SID of the specified domain is inconsistent with the trust information for that domain.

0xC000019C

STATUS_FS_DRIVER_REQUIRED

A volume has been accessed for which a file system driver is required that has not yet been loaded.

0xC000019D

STATUS_IMAGE_ALREADY_LOADED_AS_DLL

Indicates that the specified image is already loaded as a DLL.

0xC000019E

STATUS_INCOMPATIBLE_WITH_GLOBAL_SHORT_NAME_REGISTRY_SETTING

Short name settings cannot be changed on this volume due to the global registry setting.

0xC000019F

STATUS_SHORT_NAMES_NOT_ENABLED_ON_VOLUME

Short names are not enabled on this volume.

0xC00001A0

STATUS_SECURITY_STREAM_IS_INCONSISTENT

The security stream for the given volume is in an inconsistent state. Please run CHKDSK on the volume.

0xC00001A1

STATUS_INVALID_LOCK_RANGE

A requested file lock operation cannot be processed due to an invalid byte range.

0xC00001A2

STATUS_INVALID_ACE_CONDITION

The specified access control entry (ACE) contains an invalid condition.

0xC00001A3

STATUS_IMAGE_SUBSYSTEM_NOT_PRESENT

The subsystem needed to support the image type is not present.

0xC00001A4

STATUS_NOTIFICATION_GUID_ALREADY_DEFINED

The specified file already has a notification GUID associated with it.

0xC0000201

STATUS_NETWORK_OPEN_RESTRICTION

A remote open failed because the network open restrictions were not satisfied.

0xC0000202

STATUS_NO_USER_SESSION_KEY

There is no user session key for the specified logon session.

0xC0000203

STATUS_USER_SESSION_DELETED

The remote user session has been deleted.

0xC0000204

STATUS_RESOURCE_LANG_NOT_FOUND

Indicates the specified resource language ID cannot be found in the image file.

0xC0000205

STATUS_INSUFF_SERVER_RESOURCES

Insufficient server resources exist to complete the request.

0xC0000206

STATUS_INVALID_BUFFER_SIZE

The size of the buffer is invalid for the specified operation.

0xC0000207

STATUS_INVALID_ADDRESS_COMPONENT

The transport rejected the specified network address as invalid.

0xC0000208

STATUS_INVALID_ADDRESS_WILDCARD

The transport rejected the specified network address due to invalid use of a wildcard.

0xC0000209

STATUS_TOO_MANY_ADDRESSES

The transport address could not be opened because all the available addresses are in use.

0xC000020A

STATUS_ADDRESS_ALREADY_EXISTS

The transport address could not be opened because it already exists.

0xC000020B

STATUS_ADDRESS_CLOSED

The transport address is now closed.

0xC000020C

STATUS_CONNECTION_DISCONNECTED

The transport connection is now disconnected.

0xC000020D

STATUS_CONNECTION_RESET

The transport connection has been reset.

0xC000020E

STATUS_TOO_MANY_NODES

The transport cannot dynamically acquire any more nodes.

0xC000020F

STATUS_TRANSACTION_ABORTED

The transport aborted a pending transaction.

0xC0000210

STATUS_TRANSACTION_TIMED_OUT

The transport timed out a request that is waiting for a response.

0xC0000211

STATUS_TRANSACTION_NO_RELEASE

The transport did not receive a release for a pending response.

0xC0000212

STATUS_TRANSACTION_NO_MATCH

The transport did not find a transaction that matches the specific token.

0xC0000213

STATUS_TRANSACTION_RESPONDED

The transport had previously responded to a transaction request.

0xC0000214

STATUS_TRANSACTION_INVALID_ID

The transport does not recognize the specified transaction request ID.

0xC0000215

STATUS_TRANSACTION_INVALID_TYPE

The transport does not recognize the specified transaction request type.

0xC0000216

STATUS_NOT_SERVER_SESSION

The transport can only process the specified request on the server side of a session.

0xC0000217

STATUS_NOT_CLIENT_SESSION

The transport can only process the specified request on the client side of a session.

0xC0000218

STATUS_CANNOT_LOAD_REGISTRY_FILE

{Registry File Failure} The registry cannot load the hive (file): %hs or its log or alternate. It is corrupt, absent, or not writable.

0xC0000219

STATUS_DEBUG_ATTACH_FAILED

{Unexpected Failure in DebugActiveProcess} An unexpected failure occurred while processing a DebugActiveProcess API request. Choosing OK will terminate the process, and choosing Cancel will ignore the error.

0xC000021A

STATUS_SYSTEM_PROCESS_TERMINATED

{Fatal System Error} The %hs system process terminated unexpectedly with a status of 0x%08x (0x%08x 0x%08x). The system has been shut down.

0xC000021B

STATUS_DATA_NOT_ACCEPTED

{Data Not Accepted} The TDI client could not handle the data received during an indication.

0xC000021C

STATUS_NO_BROWSER_SERVERS_FOUND

{Unable to Retrieve Browser Server List} The list of servers for this workgroup is not currently available.

0xC000021D

STATUS_VDM_HARD_ERROR

NTVDM encountered a hard error.

0xC000021E

STATUS_DRIVER_CANCEL_TIMEOUT

{Cancel Timeout} The driver %hs failed to complete a canceled I/O request in the allotted time.

0xC000021F

STATUS_REPLY_MESSAGE_MISMATCH

{Reply Message Mismatch} An attempt was made to reply to an LPC message, but the thread specified by the client ID in the message was not waiting on that message.

0xC0000220

STATUS_MAPPED_ALIGNMENT

{Mapped View Alignment Incorrect} An attempt was made to map a view of a file, but either the specified base address or the offset into the file were not aligned on the proper allocation granularity.

0xC0000221

STATUS_IMAGE_CHECKSUM_MISMATCH

{Bad Image Checksum} The image %hs is possibly corrupt. The header checksum does not match the computed checksum.

0xC0000222

STATUS_LOST_WRITEBEHIND_DATA

{Delayed Write Failed} Windows was unable to save all the data for the file %hs. The data has been lost. This error might be caused by a failure of your computer hardware or network connection. Try to save this file elsewhere.

0xC0000223

STATUS_CLIENT_SERVER_PARAMETERS_INVALID

The parameters passed to the server in the client/server shared memory window were invalid. Too much data might have been put in the shared memory window.

0xC0000224

STATUS_PASSWORD_MUST_CHANGE

The user password must be changed before logging on the first time.

0xC0000225

STATUS_NOT_FOUND

The object was not found.

0xC0000226

STATUS_NOT_TINY_STREAM

The stream is not a tiny stream.

0xC0000227

STATUS_RECOVERY_FAILURE

A transaction recovery failed.

0xC0000228

STATUS_STACK_OVERFLOW_READ

The request must be handled by the stack overflow code.

0xC0000229

STATUS_FAIL_CHECK

A consistency check failed.

0xC000022A

STATUS_DUPLICATE_OBJECTID

The attempt to insert the ID in the index failed because the ID is already in the index.

0xC000022B

STATUS_OBJECTID_EXISTS

The attempt to set the object ID failed because the object already has an ID.

0xC000022C

STATUS_CONVERT_TO_LARGE

Internal OFS status codes indicating how an allocation operation is handled. Either it is retried after the containing oNode is moved or the extent stream is converted to a large stream.

0xC000022D

STATUS_RETRY

The request needs to be retried.

0xC000022E

STATUS_FOUND_OUT_OF_SCOPE

The attempt to find the object found an object on the volume that matches by ID; however, it is out of the scope of the handle that is used for the operation.

0xC000022F

STATUS_ALLOCATE_BUCKET

The bucket array must be grown. Retry the transaction after doing so.

0xC0000230

STATUS_PROPSET_NOT_FOUND

The specified property set does not exist on the object.

0xC0000231

STATUS_MARSHALL_OVERFLOW

The user/kernel marshaling buffer has overflowed.

0xC0000232

STATUS_INVALID_VARIANT

The supplied variant structure contains invalid data.

0xC0000233

STATUS_DOMAIN_CONTROLLER_NOT_FOUND

A domain controller for this domain was not found.

0xC0000234

STATUS_ACCOUNT_LOCKED_OUT

The user account has been automatically locked because too many invalid logon attempts or password change attempts have been requested.

0xC0000235

STATUS_HANDLE_NOT_CLOSABLE

NtClose was called on a handle that was protected from close via NtSetInformationObject.

0xC0000236

STATUS_CONNECTION_REFUSED

The transport-connection attempt was refused by the remote system.

0xC0000237

STATUS_GRACEFUL_DISCONNECT

The transport connection was gracefully closed.

0xC0000238

STATUS_ADDRESS_ALREADY_ASSOCIATED

The transport endpoint already has an address associated with it.

0xC0000239

STATUS_ADDRESS_NOT_ASSOCIATED

An address has not yet been associated with the transport endpoint.

0xC000023A

STATUS_CONNECTION_INVALID

An operation was attempted on a nonexistent transport connection.

0xC000023B

STATUS_CONNECTION_ACTIVE

An invalid operation was attempted on an active transport connection.

0xC000023C

STATUS_NETWORK_UNREACHABLE

The remote network is not reachable by the transport.

0xC000023D

STATUS_HOST_UNREACHABLE

The remote system is not reachable by the transport.

0xC000023E

STATUS_PROTOCOL_UNREACHABLE

The remote system does not support the transport protocol.

0xC000023F

STATUS_PORT_UNREACHABLE

No service is operating at the destination port of the transport on the remote system.

0xC0000240

STATUS_REQUEST_ABORTED

The request was aborted.

0xC0000241

STATUS_CONNECTION_ABORTED

The transport connection was aborted by the local system.

0xC0000242

STATUS_BAD_COMPRESSION_BUFFER

The specified buffer contains ill-formed data.

0xC0000243

STATUS_USER_MAPPED_FILE

The requested operation cannot be performed on a file with a user mapped section open.

0xC0000244

STATUS_AUDIT_FAILED

{Audit Failed} An attempt to generate a security audit failed.

0xC0000245

STATUS_TIMER_RESOLUTION_NOT_SET

The timer resolution was not previously set by the current process.

0xC0000246

STATUS_CONNECTION_COUNT_LIMIT

A connection to the server could not be made because the limit on the number of concurrent connections for this account has been reached.

0xC0000247

STATUS_LOGIN_TIME_RESTRICTION

Attempting to log on during an unauthorized time of day for this account.

0xC0000248

STATUS_LOGIN_WKSTA_RESTRICTION

The account is not authorized to log on from this station.

0xC0000249

STATUS_IMAGE_MP_UP_MISMATCH

{UP/MP Image Mismatch} The image %hs has been modified for use on a uniprocessor system, but you are running it on a multiprocessor machine. Reinstall the image file.

0xC0000250

STATUS_INSUFFICIENT_LOGON_INFO

There is insufficient account information to log you on.

0xC0000251

STATUS_BAD_DLL_ENTRYPOINT

{Invalid DLL Entrypoint} The dynamic link library %hs is not written correctly. The stack pointer has been left in an inconsistent state. The entry point should be declared as WINAPI or STDCALL. Select YES to fail the DLL load. Select NO to continue execution. Selecting NO might cause the application to operate incorrectly.

0xC0000252

STATUS_BAD_SERVICE_ENTRYPOINT

{Invalid Service Callback Entrypoint} The %hs service is not written correctly. The stack pointer has been left in an inconsistent state. The callback entry point should be declared as WINAPI or STDCALL. Selecting OK will cause the service to continue operation. However, the service process might operate incorrectly.

0xC0000253

STATUS_LPC_REPLY_LOST

The server received the messages but did not send a reply.

0xC0000254

STATUS_IP_ADDRESS_CONFLICT1

There is an IP address conflict with another system on the network.

0xC0000255

STATUS_IP_ADDRESS_CONFLICT2

There is an IP address conflict with another system on the network.

0xC0000256

STATUS_REGISTRY_QUOTA_LIMIT

{Low On Registry Space} The system has reached the maximum size that is allowed for the system part of the registry. Additional storage requests will be ignored.

0xC0000257

STATUS_PATH_NOT_COVERED

The contacted server does not support the indicated part of the DFS namespace.

0xC0000258

STATUS_NO_CALLBACK_ACTIVE

A callback return system service cannot be executed when no callback is active.

0xC0000259

STATUS_LICENSE_QUOTA_EXCEEDED

The service being accessed is licensed for a particular number of connections. No more connections can be made to the service at this time because the service has already accepted the maximum number of connections.

0xC000025A

STATUS_PWD_TOO_SHORT

The password provided is too short to meet the policy of your user account. Choose a longer password.

0xC000025B

STATUS_PWD_TOO_RECENT

The policy of your user account does not allow you to change passwords too frequently. This is done to prevent users from changing back to a familiar, but potentially discovered, password. If you feel your password has been compromised, contact your administrator immediately to have a new one assigned.

0xC000025C

STATUS_PWD_HISTORY_CONFLICT

You have attempted to change your password to one that you have used in the past. The policy of your user account does not allow this. Select a password that you have not previously used.

0xC000025E

STATUS_PLUGPLAY_NO_DEVICE

You have attempted to load a legacy device driver while its device instance had been disabled.

0xC000025F

STATUS_UNSUPPORTED_COMPRESSION

The specified compression format is unsupported.

0xC0000260

STATUS_INVALID_HW_PROFILE

The specified hardware profile configuration is invalid.

0xC0000261

STATUS_INVALID_PLUGPLAY_DEVICE_PATH

The specified Plug and Play registry device path is invalid.

0xC0000262

STATUS_DRIVER_ORDINAL_NOT_FOUND

{Driver Entry Point Not Found} The %hs device driver could not locate the ordinal %ld in driver %hs.

0xC0000263

STATUS_DRIVER_ENTRYPOINT_NOT_FOUND

{Driver Entry Point Not Found} The %hs device driver could not locate the entry point %hs in driver %hs.

0xC0000264

STATUS_RESOURCE_NOT_OWNED

{Application Error} The application attempted to release a resource it did not own. Click OK to terminate the application.

0xC0000265

STATUS_TOO_MANY_LINKS

An attempt was made to create more links on a file than the file system supports.

0xC0000266

STATUS_QUOTA_LIST_INCONSISTENT

The specified quota list is internally inconsistent with its descriptor.

0xC0000267

STATUS_FILE_IS_OFFLINE

The specified file has been relocated to offline storage.

0xC0000268

STATUS_EVALUATION_EXPIRATION

{Windows Evaluation Notification} The evaluation period for this installation of Windows has expired. This system will shutdown in 1 hour. To restore access to this installation of Windows, upgrade this installation by using a licensed distribution of this product.

0xC0000269

STATUS_ILLEGAL_DLL_RELOCATION

{Illegal System DLL Relocation} The system DLL %hs was relocated in memory. The application will not run properly. The relocation occurred because the DLL %hs occupied an address range that is reserved for Windows system DLLs. The vendor supplying the DLL should be contacted for a new DLL.

0xC000026A

STATUS_LICENSE_VIOLATION

{License Violation} The system has detected tampering with your registered product type. This is a violation of your software license. Tampering with the product type is not permitted.

0xC000026B

STATUS_DLL_INIT_FAILED_LOGOFF

{DLL Initialization Failed} The application failed to initialize because the window station is shutting down.

0xC000026C

STATUS_DRIVER_UNABLE_TO_LOAD

{Unable to Load Device Driver} %hs device driver could not be loaded. Error Status was 0x%x.

0xC000026D

STATUS_DFS_UNAVAILABLE

DFS is unavailable on the contacted server.

0xC000026E

STATUS_VOLUME_DISMOUNTED

An operation was attempted to a volume after it was dismounted.

0xC000026F

STATUS_WX86_INTERNAL_ERROR

An internal error occurred in the Win32 x86 emulation subsystem.

0xC0000270

STATUS_WX86_FLOAT_STACK_CHECK

Win32 x86 emulation subsystem floating-point stack check.

0xC0000271

STATUS_VALIDATE_CONTINUE

The validation process needs to continue on to the next step.

0xC0000272

STATUS_NO_MATCH

There was no match for the specified key in the index.

0xC0000273

STATUS_NO_MORE_MATCHES

There are no more matches for the current index enumeration.

0xC0000275

STATUS_NOT_A_REPARSE_POINT

The NTFS file or directory is not a reparse point.

0xC0000276

STATUS_IO_REPARSE_TAG_INVALID

The Windows I/O reparse tag passed for the NTFS reparse point is invalid.

0xC0000277

STATUS_IO_REPARSE_TAG_MISMATCH

The Windows I/O reparse tag does not match the one that is in the NTFS reparse point.

0xC0000278

STATUS_IO_REPARSE_DATA_INVALID

The user data passed for the NTFS reparse point is invalid.

0xC0000279

STATUS_IO_REPARSE_TAG_NOT_HANDLED

The layered file system driver for this I/O tag did not handle it when needed.

0xC0000280

STATUS_REPARSE_POINT_NOT_RESOLVED

The NTFS symbolic link could not be resolved even though the initial file name is valid.

0xC0000281

STATUS_DIRECTORY_IS_A_REPARSE_POINT

The NTFS directory is a reparse point.

0xC0000282

STATUS_RANGE_LIST_CONFLICT

The range could not be added to the range list because of a conflict.

0xC0000283

STATUS_SOURCE_ELEMENT_EMPTY

The specified medium changer source element contains no media.

0xC0000284

STATUS_DESTINATION_ELEMENT_FULL

The specified medium changer destination element already contains media.

0xC0000285

STATUS_ILLEGAL_ELEMENT_ADDRESS

The specified medium changer element does not exist.

0xC0000286

STATUS_MAGAZINE_NOT_PRESENT

The specified element is contained in a magazine that is no longer present.

0xC0000287

STATUS_REINITIALIZATION_NEEDED

The device requires re-initialization due to hardware errors.

0xC000028A

STATUS_ENCRYPTION_FAILED

The file encryption attempt failed.

0xC000028B

STATUS_DECRYPTION_FAILED

The file decryption attempt failed.

0xC000028C

STATUS_RANGE_NOT_FOUND

The specified range could not be found in the range list.

0xC000028D

STATUS_NO_RECOVERY_POLICY

There is no encryption recovery policy configured for this system.

0xC000028E

STATUS_NO_EFS

The required encryption driver is not loaded for this system.

0xC000028F

STATUS_WRONG_EFS

The file was encrypted with a different encryption driver than is currently loaded.

0xC0000290

STATUS_NO_USER_KEYS

There are no EFS keys defined for the user.

0xC0000291

STATUS_FILE_NOT_ENCRYPTED

The specified file is not encrypted.

0xC0000292

STATUS_NOT_EXPORT_FORMAT

The specified file is not in the defined EFS export format.

0xC0000293

STATUS_FILE_ENCRYPTED

The specified file is encrypted and the user does not have the ability to decrypt it.

0xC0000295

STATUS_WMI_GUID_NOT_FOUND

The GUID passed was not recognized as valid by a WMI data provider.

0xC0000296

STATUS_WMI_INSTANCE_NOT_FOUND

The instance name passed was not recognized as valid by a WMI data provider.

0xC0000297

STATUS_WMI_ITEMID_NOT_FOUND

The data item ID passed was not recognized as valid by a WMI data provider.

0xC0000298

STATUS_WMI_TRY_AGAIN

The WMI request could not be completed and should be retried.

0xC0000299

STATUS_SHARED_POLICY

The policy object is shared and can only be modified at the root.

0xC000029A

STATUS_POLICY_OBJECT_NOT_FOUND

The policy object does not exist when it should.

0xC000029B

STATUS_POLICY_ONLY_IN_DS

The requested policy information only lives in the Ds.

0xC000029C

STATUS_VOLUME_NOT_UPGRADED

The volume must be upgraded to enable this feature.

0xC000029D

STATUS_REMOTE_STORAGE_NOT_ACTIVE

The remote storage service is not operational at this time.

0xC000029E

STATUS_REMOTE_STORAGE_MEDIA_ERROR

The remote storage service encountered a media error.

0xC000029F

STATUS_NO_TRACKING_SERVICE

The tracking (workstation) service is not running.

0xC00002A0

STATUS_SERVER_SID_MISMATCH

The server process is running under a SID that is different from the SID that is required by client.

0xC00002A1

STATUS_DS_NO_ATTRIBUTE_OR_VALUE

The specified directory service attribute or value does not exist.

0xC00002A2

STATUS_DS_INVALID_ATTRIBUTE_SYNTAX

The attribute syntax specified to the directory service is invalid.

0xC00002A3

STATUS_DS_ATTRIBUTE_TYPE_UNDEFINED

The attribute type specified to the directory service is not defined.

0xC00002A4

STATUS_DS_ATTRIBUTE_OR_VALUE_EXISTS

The specified directory service attribute or value already exists.

0xC00002A5

STATUS_DS_BUSY

The directory service is busy.

0xC00002A6

STATUS_DS_UNAVAILABLE

The directory service is unavailable.

0xC00002A7

STATUS_DS_NO_RIDS_ALLOCATED

The directory service was unable to allocate a relative identifier.

0xC00002A8

STATUS_DS_NO_MORE_RIDS

The directory service has exhausted the pool of relative identifiers.

0xC00002A9

STATUS_DS_INCORRECT_ROLE_OWNER

The requested operation could not be performed because the directory service is not the master for that type of operation.

0xC00002AA

STATUS_DS_RIDMGR_INIT_ERROR

The directory service was unable to initialize the subsystem that allocates relative identifiers.

0xC00002AB

STATUS_DS_OBJ_CLASS_VIOLATION

The requested operation did not satisfy one or more constraints that are associated with the class of the object.

0xC00002AC

STATUS_DS_CANT_ON_NON_LEAF

The directory service can perform the requested operation only on a leaf object.

0xC00002AD

STATUS_DS_CANT_ON_RDN

The directory service cannot perform the requested operation on the Relatively Defined Name (RDN) attribute of an object.

0xC00002AE

STATUS_DS_CANT_MOD_OBJ_CLASS

The directory service detected an attempt to modify the object class of an object.

0xC00002AF

STATUS_DS_CROSS_DOM_MOVE_FAILED

An error occurred while performing a cross domain move operation.

0xC00002B0

STATUS_DS_GC_NOT_AVAILABLE

Unable to contact the global catalog server.

0xC00002B1

STATUS_DIRECTORY_SERVICE_REQUIRED

The requested operation requires a directory service, and none was available.

0xC00002B2

STATUS_REPARSE_ATTRIBUTE_CONFLICT

The reparse attribute cannot be set because it is incompatible with an existing attribute.

0xC00002B3

STATUS_CANT_ENABLE_DENY_ONLY

A group marked "use for deny only" cannot be enabled.

0xC00002B4

STATUS_FLOAT_MULTIPLE_FAULTS

{EXCEPTION} Multiple floating-point faults.

0xC00002B5

STATUS_FLOAT_MULTIPLE_TRAPS

{EXCEPTION} Multiple floating-point traps.

0xC00002B6

STATUS_DEVICE_REMOVED

The device has been removed.

0xC00002B7

STATUS_JOURNAL_DELETE_IN_PROGRESS

The volume change journal is being deleted.

0xC00002B8

STATUS_JOURNAL_NOT_ACTIVE

The volume change journal is not active.

0xC00002B9

STATUS_NOINTERFACE

The requested interface is not supported.

0xC00002C1

STATUS_DS_ADMIN_LIMIT_EXCEEDED

A directory service resource limit has been exceeded.

0xC00002C2

STATUS_DRIVER_FAILED_SLEEP

{System Standby Failed} The driver %hs does not support standby mode. Updating this driver allows the system to go to standby mode.

0xC00002C3

STATUS_MUTUAL_AUTHENTICATION_FAILED

Mutual Authentication failed. The server password is out of date at the domain controller.

0xC00002C4

STATUS_CORRUPT_SYSTEM_FILE

The system file %1 has become corrupt and has been replaced.

0xC00002C5

STATUS_DATATYPE_MISALIGNMENT_ERROR

{EXCEPTION} Alignment Error A data type misalignment error was detected in a load or store instruction.

0xC00002C6

STATUS_WMI_READ_ONLY

The WMI data item or data block is read-only.

0xC00002C7

STATUS_WMI_SET_FAILURE

The WMI data item or data block could not be changed.

0xC00002C8

STATUS_COMMITMENT_MINIMUM

{Virtual Memory Minimum Too Low} Your system is low on virtual memory. Windows is increasing the size of your virtual memory paging file. During this process, memory requests for some applications might be denied. For more information, see Help.

0xC00002C9

STATUS_REG_NAT_CONSUMPTION

{EXCEPTION} Register NaT consumption faults. A NaT value is consumed on a non-speculative instruction.

0xC00002CA

STATUS_TRANSPORT_FULL

The transport element of the medium changer contains media, which is causing the operation to fail.

0xC00002CB

STATUS_DS_SAM_INIT_FAILURE

Security Accounts Manager initialization failed because of the following error: %hs Error Status: 0x%x. Click OK to shut down this system and restart in Directory Services Restore Mode. Check the event log for more detailed information.

0xC00002CC

STATUS_ONLY_IF_CONNECTED

This operation is supported only when you are connected to the server.

0xC00002CD

STATUS_DS_SENSITIVE_GROUP_VIOLATION

Only an administrator can modify the membership list of an administrative group.

0xC00002CE

STATUS_PNP_RESTART_ENUMERATION

A device was removed so enumeration must be restarted.

0xC00002CF

STATUS_JOURNAL_ENTRY_DELETED

The journal entry has been deleted from the journal.

0xC00002D0

STATUS_DS_CANT_MOD_PRIMARYGROUPID

Cannot change the primary group ID of a domain controller account.

0xC00002D1

STATUS_SYSTEM_IMAGE_BAD_SIGNATURE

{Fatal System Error} The system image %s is not properly signed. The file has been replaced with the signed file. The system has been shut down.

0xC00002D2

STATUS_PNP_REBOOT_REQUIRED

The device will not start without a reboot.

0xC00002D3

STATUS_POWER_STATE_INVALID

The power state of the current device cannot support this request.

0xC00002D4

STATUS_DS_INVALID_GROUP_TYPE

The specified group type is invalid.

0xC00002D5

STATUS_DS_NO_NEST_GLOBALGROUP_IN_MIXEDDOMAIN

In a mixed domain, no nesting of a global group if the group is security enabled.

0xC00002D6

STATUS_DS_NO_NEST_LOCALGROUP_IN_MIXEDDOMAIN

In a mixed domain, cannot nest local groups with other local groups, if the group is security enabled.

0xC00002D7

STATUS_DS_GLOBAL_CANT_HAVE_LOCAL_MEMBER

A global group cannot have a local group as a member.

0xC00002D8

STATUS_DS_GLOBAL_CANT_HAVE_UNIVERSAL_MEMBER

A global group cannot have a universal group as a member.

0xC00002D9

STATUS_DS_UNIVERSAL_CANT_HAVE_LOCAL_MEMBER

A universal group cannot have a local group as a member.

0xC00002DA

STATUS_DS_GLOBAL_CANT_HAVE_CROSSDOMAIN_MEMBER

A global group cannot have a cross-domain member.

0xC00002DB

STATUS_DS_LOCAL_CANT_HAVE_CROSSDOMAIN_LOCAL_MEMBER

A local group cannot have another cross-domain local group as a member.

0xC00002DC

STATUS_DS_HAVE_PRIMARY_MEMBERS

Cannot change to a security-disabled group because primary members are in this group.

0xC00002DD

STATUS_WMI_NOT_SUPPORTED

The WMI operation is not supported by the data block or method.

0xC00002DE

STATUS_INSUFFICIENT_POWER

There is not enough power to complete the requested operation.

0xC00002DF

STATUS_SAM_NEED_BOOTKEY_PASSWORD

The Security Accounts Manager needs to get the boot password.

0xC00002E0

STATUS_SAM_NEED_BOOTKEY_FLOPPY

The Security Accounts Manager needs to get the boot key from the floppy disk.

0xC00002E1

STATUS_DS_CANT_START

The directory service cannot start.

0xC00002E2

STATUS_DS_INIT_FAILURE

The directory service could not start because of the following error: %hs Error Status: 0x%x. Click OK to shut down this system and restart in Directory Services Restore Mode. Check the event log for more detailed information.

0xC00002E3

STATUS_SAM_INIT_FAILURE

The Security Accounts Manager initialization failed because of the following error: %hs Error Status: 0x%x. Click OK to shut down this system and restart in Safe Mode. Check the event log for more detailed information.

0xC00002E4

STATUS_DS_GC_REQUIRED

The requested operation can be performed only on a global catalog server.

0xC00002E5

STATUS_DS_LOCAL_MEMBER_OF_LOCAL_ONLY

A local group can only be a member of other local groups in the same domain.

0xC00002E6

STATUS_DS_NO_FPO_IN_UNIVERSAL_GROUPS

Foreign security principals cannot be members of universal groups.

0xC00002E7

STATUS_DS_MACHINE_ACCOUNT_QUOTA_EXCEEDED

Your computer could not be joined to the domain. You have exceeded the maximum number of computer accounts you are allowed to create in this domain. Contact your system administrator to have this limit reset or increased.

0xC00002E9

STATUS_CURRENT_DOMAIN_NOT_ALLOWED

This operation cannot be performed on the current domain.

0xC00002EA

STATUS_CANNOT_MAKE

The directory or file cannot be created.

0xC00002EB

STATUS_SYSTEM_SHUTDOWN

The system is in the process of shutting down.

0xC00002EC

STATUS_DS_INIT_FAILURE_CONSOLE

Directory Services could not start because of the following error: %hs Error Status: 0x%x. Click OK to shut down the system. You can use the recovery console to diagnose the system further.

0xC00002ED

STATUS_DS_SAM_INIT_FAILURE_CONSOLE

Security Accounts Manager initialization failed because of the following error: %hs Error Status: 0x%x. Click OK to shut down the system. You can use the recovery console to diagnose the system further.

0xC00002EE

STATUS_UNFINISHED_CONTEXT_DELETED

A security context was deleted before the context was completed. This is considered a logon failure.

0xC00002EF

STATUS_NO_TGT_REPLY

The client is trying to negotiate a context and the server requires user-to-user but did not send a TGT reply.

0xC00002F0

STATUS_OBJECTID_NOT_FOUND

An object ID was not found in the file.

0xC00002F1

STATUS_NO_IP_ADDRESSES

Unable to accomplish the requested task because the local machine does not have any IP addresses.

0xC00002F2

STATUS_WRONG_CREDENTIAL_HANDLE

The supplied credential handle does not match the credential that is associated with the security context.

0xC00002F3

STATUS_CRYPTO_SYSTEM_INVALID

The crypto system or checksum function is invalid because a required function is unavailable.

0xC00002F4

STATUS_MAX_REFERRALS_EXCEEDED

The number of maximum ticket referrals has been exceeded.

0xC00002F5

STATUS_MUST_BE_KDC

The local machine must be a Kerberos KDC (domain controller) and it is not.

0xC00002F6

STATUS_STRONG_CRYPTO_NOT_SUPPORTED

The other end of the security negotiation requires strong crypto but it is not supported on the local machine.

0xC00002F7

STATUS_TOO_MANY_PRINCIPALS

The KDC reply contained more than one principal name.

0xC00002F8

STATUS_NO_PA_DATA

Expected to find PA data for a hint of what etype to use, but it was not found.

0xC00002F9

STATUS_PKINIT_NAME_MISMATCH

The client certificate does not contain a valid UPN, or does not match the client name in the logon request. Contact your administrator.

0xC00002FA

STATUS_SMARTCARD_LOGON_REQUIRED

Smart card logon is required and was not used.

0xC00002FB

STATUS_KDC_INVALID_REQUEST

An invalid request was sent to the KDC.

0xC00002FC

STATUS_KDC_UNABLE_TO_REFER

The KDC was unable to generate a referral for the service requested.

0xC00002FD

STATUS_KDC_UNKNOWN_ETYPE

The encryption type requested is not supported by the KDC.

0xC00002FE

STATUS_SHUTDOWN_IN_PROGRESS

A system shutdown is in progress.

0xC00002FF

STATUS_SERVER_SHUTDOWN_IN_PROGRESS

The server machine is shutting down.

0xC0000300

STATUS_NOT_SUPPORTED_ON_SBS

This operation is not supported on a computer running Windows Server 2003 operating system for Small Business Server.

0xC0000301

STATUS_WMI_GUID_DISCONNECTED

The WMI GUID is no longer available.

0xC0000302

STATUS_WMI_ALREADY_DISABLED

Collection or events for the WMI GUID is already disabled.

0xC0000303

STATUS_WMI_ALREADY_ENABLED

Collection or events for the WMI GUID is already enabled.

0xC0000304

STATUS_MFT_TOO_FRAGMENTED

The master file table on the volume is too fragmented to complete this operation.

0xC0000305

STATUS_COPY_PROTECTION_FAILURE

Copy protection failure.

0xC0000306

STATUS_CSS_AUTHENTICATION_FAILURE

Copy protection error—DVD CSS Authentication failed.

0xC0000307

STATUS_CSS_KEY_NOT_PRESENT

Copy protection error—The specified sector does not contain a valid key.

0xC0000308

STATUS_CSS_KEY_NOT_ESTABLISHED

Copy protection error—DVD session key not established.

0xC0000309

STATUS_CSS_SCRAMBLED_SECTOR

Copy protection error—The read failed because the sector is encrypted.

0xC000030A

STATUS_CSS_REGION_MISMATCH

Copy protection error—The region of the specified DVD does not correspond to the region setting of the drive.

0xC000030B

STATUS_CSS_RESETS_EXHAUSTED

Copy protection error—The region setting of the drive might be permanent.

0xC0000320

STATUS_PKINIT_FAILURE

The Kerberos protocol encountered an error while validating the KDC certificate during smart card logon. There is more information in the system event log.

0xC0000321

STATUS_SMARTCARD_SUBSYSTEM_FAILURE

The Kerberos protocol encountered an error while attempting to use the smart card subsystem.

0xC0000322

STATUS_NO_KERB_KEY

The target server does not have acceptable Kerberos credentials.

0xC0000350

STATUS_HOST_DOWN

The transport determined that the remote system is down.

0xC0000351

STATUS_UNSUPPORTED_PREAUTH

An unsupported pre-authentication mechanism was presented to the Kerberos package.

0xC0000352

STATUS_EFS_ALG_BLOB_TOO_BIG

The encryption algorithm that is used on the source file needs a bigger key buffer than the one that is used on the destination file.

0xC0000353

STATUS_PORT_NOT_SET

An attempt to remove a processes DebugPort was made, but a port was not already associated with the process.

0xC0000354

STATUS_DEBUGGER_INACTIVE

An attempt to do an operation on a debug port failed because the port is in the process of being deleted.

0xC0000355

STATUS_DS_VERSION_CHECK_FAILURE

This version of Windows is not compatible with the behavior version of the directory forest, domain, or domain controller.

0xC0000356

STATUS_AUDITING_DISABLED

The specified event is currently not being audited.

0xC0000357

STATUS_PRENT4_MACHINE_ACCOUNT

The machine account was created prior to Windows NT 4.0 operating system. The account needs to be recreated.

0xC0000358

STATUS_DS_AG_CANT_HAVE_UNIVERSAL_MEMBER

An account group cannot have a universal group as a member.

0xC0000359

STATUS_INVALID_IMAGE_WIN_32

The specified image file did not have the correct format; it appears to be a 32-bit Windows image.

0xC000035A

STATUS_INVALID_IMAGE_WIN_64

The specified image file did not have the correct format; it appears to be a 64-bit Windows image.

0xC000035B

STATUS_BAD_BINDINGS

The client's supplied SSPI channel bindings were incorrect.

0xC000035C

STATUS_NETWORK_SESSION_EXPIRED

The client session has expired; so the client must re-authenticate to continue accessing the remote resources.

0xC000035D

STATUS_APPHELP_BLOCK

The AppHelp dialog box canceled; thus preventing the application from starting.

0xC000035E

STATUS_ALL_SIDS_FILTERED

The SID filtering operation removed all SIDs.

0xC000035F

STATUS_NOT_SAFE_MODE_DRIVER

The driver was not loaded because the system is starting in safe mode.

0xC0000361

STATUS_ACCESS_DISABLED_BY_POLICY_DEFAULT

Access to %1 has been restricted by your Administrator by the default software restriction policy level.

0xC0000362

STATUS_ACCESS_DISABLED_BY_POLICY_PATH

Access to %1 has been restricted by your Administrator by location with policy rule %2 placed on path %3.

0xC0000363

STATUS_ACCESS_DISABLED_BY_POLICY_PUBLISHER

Access to %1 has been restricted by your Administrator by software publisher policy.

0xC0000364

STATUS_ACCESS_DISABLED_BY_POLICY_OTHER

Access to %1 has been restricted by your Administrator by policy rule %2.

0xC0000365

STATUS_FAILED_DRIVER_ENTRY

The driver was not loaded because it failed its initialization call.

0xC0000366

STATUS_DEVICE_ENUMERATION_ERROR

The device encountered an error while applying power or reading the device configuration. This might be caused by a failure of your hardware or by a poor connection.

0xC0000368

STATUS_MOUNT_POINT_NOT_RESOLVED

The create operation failed because the name contained at least one mount point that resolves to a volume to which the specified device object is not attached.

0xC0000369

STATUS_INVALID_DEVICE_OBJECT_PARAMETER

The device object parameter is either not a valid device object or is not attached to the volume that is specified by the file name.

0xC000036A

STATUS_MCA_OCCURED

A machine check error has occurred. Check the system event log for additional information.

0xC000036B

STATUS_DRIVER_BLOCKED_CRITICAL

Driver %2 has been blocked from loading.

0xC000036C

STATUS_DRIVER_BLOCKED

Driver %2 has been blocked from loading.

0xC000036D

STATUS_DRIVER_DATABASE_ERROR

There was error [%2] processing the driver database.

0xC000036E

STATUS_SYSTEM_HIVE_TOO_LARGE

System hive size has exceeded its limit.

0xC000036F

STATUS_INVALID_IMPORT_OF_NON_DLL

A dynamic link library (DLL) referenced a module that was neither a DLL nor the process's executable image.

0xC0000371

STATUS_NO_SECRETS

The local account store does not contain secret material for the specified account.

0xC0000372

STATUS_ACCESS_DISABLED_NO_SAFER_UI_BY_POLICY

Access to %1 has been restricted by your Administrator by policy rule %2.

0xC0000373

STATUS_FAILED_STACK_SWITCH

The system was not able to allocate enough memory to perform a stack switch.

0xC0000374

STATUS_HEAP_CORRUPTION

A heap has been corrupted.

0xC0000380

STATUS_SMARTCARD_WRONG_PIN

An incorrect PIN was presented to the smart card.

0xC0000381

STATUS_SMARTCARD_CARD_BLOCKED

The smart card is blocked.

0xC0000382

STATUS_SMARTCARD_CARD_NOT_AUTHENTICATED

No PIN was presented to the smart card.

0xC0000383

STATUS_SMARTCARD_NO_CARD

No smart card is available.

0xC0000384

STATUS_SMARTCARD_NO_KEY_CONTAINER

The requested key container does not exist on the smart card.

0xC0000385

STATUS_SMARTCARD_NO_CERTIFICATE

The requested certificate does not exist on the smart card.

0xC0000386

STATUS_SMARTCARD_NO_KEYSET

The requested keyset does not exist.

0xC0000387

STATUS_SMARTCARD_IO_ERROR

A communication error with the smart card has been detected.

0xC0000388

STATUS_DOWNGRADE_DETECTED

The system detected a possible attempt to compromise security. Ensure that you can contact the server that authenticated you.

0xC0000389

STATUS_SMARTCARD_CERT_REVOKED

The smart card certificate used for authentication has been revoked. Contact your system administrator. There might be additional information in the event log.

0xC000038A

STATUS_ISSUING_CA_UNTRUSTED

An untrusted certificate authority was detected while processing the smart card certificate that is used for authentication. Contact your system administrator.

0xC000038B

STATUS_REVOCATION_OFFLINE_C

The revocation status of the smart card certificate that is used for authentication could not be determined. Contact your system administrator.

0xC000038C

STATUS_PKINIT_CLIENT_FAILURE

The smart card certificate used for authentication was not trusted. Contact your system administrator.

0xC000038D

STATUS_SMARTCARD_CERT_EXPIRED

The smart card certificate used for authentication has expired. Contact your system administrator.

0xC000038E

STATUS_DRIVER_FAILED_PRIOR_UNLOAD

The driver could not be loaded because a previous version of the driver is still in memory.

0xC000038F

STATUS_SMARTCARD_SILENT_CONTEXT

The smart card provider could not perform the action because the context was acquired as silent.

0xC0000401

STATUS_PER_USER_TRUST_QUOTA_EXCEEDED

The delegated trust creation quota of the current user has been exceeded.

0xC0000402

STATUS_ALL_USER_TRUST_QUOTA_EXCEEDED

The total delegated trust creation quota has been exceeded.

0xC0000403

STATUS_USER_DELETE_TRUST_QUOTA_EXCEEDED

The delegated trust deletion quota of the current user has been exceeded.

0xC0000404

STATUS_DS_NAME_NOT_UNIQUE

The requested name already exists as a unique identifier.

0xC0000405

STATUS_DS_DUPLICATE_ID_FOUND

The requested object has a non-unique identifier and cannot be retrieved.

0xC0000406

STATUS_DS_GROUP_CONVERSION_ERROR

The group cannot be converted due to attribute restrictions on the requested group type.

0xC0000407

STATUS_VOLSNAP_PREPARE_HIBERNATE

{Volume Shadow Copy Service} Wait while the Volume Shadow Copy Service prepares volume %hs for hibernation.

0xC0000408

STATUS_USER2USER_REQUIRED

Kerberos sub-protocol User2User is required.

0xC0000409

STATUS_STACK_BUFFER_OVERRUN

The system detected an overrun of a stack-based buffer in this application. This overrun could potentially allow a malicious user to gain control of this application.

0xC000040A

STATUS_NO_S4U_PROT_SUPPORT

The Kerberos subsystem encountered an error. A service for user protocol request was made against a domain controller which does not support service for user.

0xC000040B

STATUS_CROSSREALM_DELEGATION_FAILURE

An attempt was made by this server to make a Kerberos constrained delegation request for a target that is outside the server realm. This action is not supported and the resulting error indicates a misconfiguration on the allowed-to-delegate-to list for this server. Contact your administrator.

0xC000040C

STATUS_REVOCATION_OFFLINE_KDC

The revocation status of the domain controller certificate used for smart card authentication could not be determined. There is additional information in the system event log. Contact your system administrator.

0xC000040D

STATUS_ISSUING_CA_UNTRUSTED_KDC

An untrusted certificate authority was detected while processing the domain controller certificate used for authentication. There is additional information in the system event log. Contact your system administrator.

0xC000040E

STATUS_KDC_CERT_EXPIRED

The domain controller certificate used for smart card logon has expired. Contact your system administrator with the contents of your system event log.

0xC000040F

STATUS_KDC_CERT_REVOKED

The domain controller certificate used for smart card logon has been revoked. Contact your system administrator with the contents of your system event log.

0xC0000410

STATUS_PARAMETER_QUOTA_EXCEEDED

Data present in one of the parameters is more than the function can operate on.

0xC0000411

STATUS_HIBERNATION_FAILURE

The system has failed to hibernate (The error code is %hs). Hibernation will be disabled until the system is restarted.

0xC0000412

STATUS_DELAY_LOAD_FAILED

An attempt to delay-load a .dll or get a function address in a delay-loaded .dll failed.

0xC0000413

STATUS_AUTHENTICATION_FIREWALL_FAILED

Logon Failure: The machine you are logging onto is protected by an authentication firewall. The specified account is not allowed to authenticate to the machine.

0xC0000414

STATUS_VDM_DISALLOWED

%hs is a 16-bit application. You do not have permissions to execute 16-bit applications. Check your permissions with your system administrator.

0xC0000415

STATUS_HUNG_DISPLAY_DRIVER_THREAD

{Display Driver Stopped Responding} The %hs display driver has stopped working normally. Save your work and reboot the system to restore full display functionality. The next time you reboot the machine a dialog will be displayed giving you a chance to report this failure to Microsoft.

0xC0000416

STATUS_INSUFFICIENT_RESOURCE_FOR_SPECIFIED_SHARED_SECTION_SIZE

The Desktop heap encountered an error while allocating session memory. There is more information in the system event log.

0xC0000417

STATUS_INVALID_CRUNTIME_PARAMETER

An invalid parameter was passed to a C runtime function.

0xC0000418

STATUS_NTLM_BLOCKED

The authentication failed because NTLM was blocked.

0xC0000419

STATUS_DS_SRC_SID_EXISTS_IN_FOREST

The source object's SID already exists in destination forest.

0xC000041A

STATUS_DS_DOMAIN_NAME_EXISTS_IN_FOREST

The domain name of the trusted domain already exists in the forest.

0xC000041B

STATUS_DS_FLAT_NAME_EXISTS_IN_FOREST

The flat name of the trusted domain already exists in the forest.

0xC000041C

STATUS_INVALID_USER_PRINCIPAL_NAME

The User Principal Name (UPN) is invalid.

0xC0000420

STATUS_ASSERTION_FAILURE

There has been an assertion failure.

0xC0000421

STATUS_VERIFIER_STOP

Application verifier has found an error in the current process.

0xC0000423

STATUS_CALLBACK_POP_STACK

A user mode unwind is in progress.

0xC0000424

STATUS_INCOMPATIBLE_DRIVER_BLOCKED

%2 has been blocked from loading due to incompatibility with this system. Contact your software vendor for a compatible version of the driver.

0xC0000425

STATUS_HIVE_UNLOADED

Illegal operation attempted on a registry key which has already been unloaded.

0xC0000426

STATUS_COMPRESSION_DISABLED

Compression is disabled for this volume.

0xC0000427

STATUS_FILE_SYSTEM_LIMITATION

The requested operation could not be completed due to a file system limitation.

0xC0000428

STATUS_INVALID_IMAGE_HASH

The hash for image %hs cannot be found in the system catalogs. The image is likely corrupt or the victim of tampering.

0xC0000429

STATUS_NOT_CAPABLE

The implementation is not capable of performing the request.

0xC000042A

STATUS_REQUEST_OUT_OF_SEQUENCE

The requested operation is out of order with respect to other operations.

0xC000042B

STATUS_IMPLEMENTATION_LIMIT

An operation attempted to exceed an implementation-defined limit.

0xC000042C

STATUS_ELEVATION_REQUIRED

The requested operation requires elevation.

0xC000042D

STATUS_NO_SECURITY_CONTEXT

The required security context does not exist.

0xC000042E

STATUS_PKU2U_CERT_FAILURE

The PKU2U protocol encountered an error while attempting to utilize the associated certificates.

0xC0000432

STATUS_BEYOND_VDL

The operation was attempted beyond the valid data length of the file.

0xC0000433

STATUS_ENCOUNTERED_WRITE_IN_PROGRESS

The attempted write operation encountered a write already in progress for some portion of the range.

0xC0000434

STATUS_PTE_CHANGED

The page fault mappings changed in the middle of processing a fault so the operation must be retried.

0xC0000435

STATUS_PURGE_FAILED

The attempt to purge this file from memory failed to purge some or all the data from memory.

0xC0000440

STATUS_CRED_REQUIRES_CONFIRMATION

The requested credential requires confirmation.

0xC0000441

STATUS_CS_ENCRYPTION_INVALID_SERVER_RESPONSE

The remote server sent an invalid response for a file being opened with Client Side Encryption.

0xC0000442

STATUS_CS_ENCRYPTION_UNSUPPORTED_SERVER

Client Side Encryption is not supported by the remote server even though it claims to support it.

0xC0000443

STATUS_CS_ENCRYPTION_EXISTING_ENCRYPTED_FILE

File is encrypted and should be opened in Client Side Encryption mode.

0xC0000444

STATUS_CS_ENCRYPTION_NEW_ENCRYPTED_FILE

A new encrypted file is being created and a $EFS needs to be provided.

0xC0000445

STATUS_CS_ENCRYPTION_FILE_NOT_CSE

The SMB client requested a CSE FSCTL on a non-CSE file.

0xC0000446

STATUS_INVALID_LABEL

Indicates a particular Security ID cannot be assigned as the label of an object.

0xC0000450

STATUS_DRIVER_PROCESS_TERMINATED

The process hosting the driver for this device has terminated.

0xC0000451

STATUS_AMBIGUOUS_SYSTEM_DEVICE

The requested system device cannot be identified due to multiple indistinguishable devices potentially matching the identification criteria.

0xC0000452

STATUS_SYSTEM_DEVICE_NOT_FOUND

The requested system device cannot be found.

0xC0000453

STATUS_RESTART_BOOT_APPLICATION

This boot application must be restarted.

0xC0000454

STATUS_INSUFFICIENT_NVRAM_RESOURCES

Insufficient NVRAM resources exist to complete the API.  A reboot might be required.

0xC0000460

STATUS_NO_RANGES_PROCESSED

No ranges for the specified operation were able to be processed.

0xC0000463

STATUS_DEVICE_FEATURE_NOT_SUPPORTED

The storage device does not support Offload Write.

0xC0000464

STATUS_DEVICE_UNREACHABLE

Data cannot be moved because the source device cannot communicate with the destination device.

0xC0000465

STATUS_INVALID_TOKEN

The token representing the data is invalid or expired.

0xC0000466

STATUS_SERVER_UNAVAILABLE

The file server is temporarily unavailable.

0xC0000500

STATUS_INVALID_TASK_NAME

The specified task name is invalid.

0xC0000501

STATUS_INVALID_TASK_INDEX

The specified task index is invalid.

0xC0000502

STATUS_THREAD_ALREADY_IN_TASK

The specified thread is already joining a task.

0xC0000503

STATUS_CALLBACK_BYPASS

A callback has requested to bypass native code.

0xC0000602

STATUS_FAIL_FAST_EXCEPTION

A fail fast exception occurred. Exception handlers will not be invoked and the process will be terminated immediately.

0xC0000603

STATUS_IMAGE_CERT_REVOKED

Windows cannot verify the digital signature for this file. The signing certificate for this file has been revoked.

0xC0000700

STATUS_PORT_CLOSED

The ALPC port is closed.

0xC0000701

STATUS_MESSAGE_LOST

The ALPC message requested is no longer available.

0xC0000702

STATUS_INVALID_MESSAGE

The ALPC message supplied is invalid.

0xC0000703

STATUS_REQUEST_CANCELED

The ALPC message has been canceled.

0xC0000704

STATUS_RECURSIVE_DISPATCH

Invalid recursive dispatch attempt.

0xC0000705

STATUS_LPC_RECEIVE_BUFFER_EXPECTED

No receive buffer has been supplied in a synchronous request.

0xC0000706

STATUS_LPC_INVALID_CONNECTION_USAGE

The connection port is used in an invalid context.

0xC0000707

STATUS_LPC_REQUESTS_NOT_ALLOWED

The ALPC port does not accept new request messages.

0xC0000708

STATUS_RESOURCE_IN_USE

The resource requested is already in use.

0xC0000709

STATUS_HARDWARE_MEMORY_ERROR

The hardware has reported an uncorrectable memory error.

0xC000070A

STATUS_THREADPOOL_HANDLE_EXCEPTION

Status 0x%08x was returned, waiting on handle 0x%x for wait 0x%p, in waiter 0x%p.

0xC000070B

STATUS_THREADPOOL_SET_EVENT_ON_COMPLETION_FAILED

After a callback to 0x%p(0x%p), a completion call to Set event(0x%p) failed with status 0x%08x.

0xC000070C

STATUS_THREADPOOL_RELEASE_SEMAPHORE_ON_COMPLETION_FAILED

After a callback to 0x%p(0x%p), a completion call to ReleaseSemaphore(0x%p, %d) failed with status 0x%08x.

0xC000070D

STATUS_THREADPOOL_RELEASE_MUTEX_ON_COMPLETION_FAILED

After a callback to 0x%p(0x%p), a completion call to ReleaseMutex(%p) failed with status 0x%08x.

0xC000070E

STATUS_THREADPOOL_FREE_LIBRARY_ON_COMPLETION_FAILED

After a callback to 0x%p(0x%p), a completion call to FreeLibrary(%p) failed with status 0x%08x.

0xC000070F

STATUS_THREADPOOL_RELEASED_DURING_OPERATION

The thread pool 0x%p was released while a thread was posting a callback to 0x%p(0x%p) to it.

0xC0000710

STATUS_CALLBACK_RETURNED_WHILE_IMPERSONATING

A thread pool worker thread is impersonating a client, after a callback to 0x%p(0x%p). This is unexpected, indicating that the callback is missing a call to revert the impersonation.

0xC0000711

STATUS_APC_RETURNED_WHILE_IMPERSONATING

A thread pool worker thread is impersonating a client, after executing an APC. This is unexpected, indicating that the APC is missing a call to revert the impersonation.

0xC0000712

STATUS_PROCESS_IS_PROTECTED

Either the target process, or the target thread's containing process, is a protected process.

0xC0000713

STATUS_MCA_EXCEPTION

A thread is getting dispatched with MCA EXCEPTION because of MCA.

0xC0000714

STATUS_CERTIFICATE_MAPPING_NOT_UNIQUE

The client certificate account mapping is not unique.

0xC0000715

STATUS_SYMLINK_CLASS_DISABLED

The symbolic link cannot be followed because its type is disabled.

0xC0000716

STATUS_INVALID_IDN_NORMALIZATION

Indicates that the specified string is not valid for IDN normalization.

0xC0000717

STATUS_NO_UNICODE_TRANSLATION

No mapping for the Unicode character exists in the target multi-byte code page.

0xC0000718

STATUS_ALREADY_REGISTERED

The provided callback is already registered.

0xC0000719

STATUS_CONTEXT_MISMATCH

The provided context did not match the target.

0xC000071A

STATUS_PORT_ALREADY_HAS_COMPLETION_LIST

The specified port already has a completion list.

0xC000071B

STATUS_CALLBACK_RETURNED_THREAD_PRIORITY

A threadpool worker thread entered a callback at thread base priority 0x%x and exited at priority 0x%x.

This is unexpected, indicating that the callback missed restoring the priority.

0xC000071C

STATUS_INVALID_THREAD

An invalid thread, handle %p, is specified for this operation. Possibly, a threadpool worker thread was specified.

0xC000071D

STATUS_CALLBACK_RETURNED_TRANSACTION

A threadpool worker thread entered a callback, which left transaction state.

This is unexpected, indicating that the callback missed clearing the transaction.

0xC000071E

STATUS_CALLBACK_RETURNED_LDR_LOCK

A threadpool worker thread entered a callback, which left the loader lock held.

This is unexpected, indicating that the callback missed releasing the lock.

0xC000071F

STATUS_CALLBACK_RETURNED_LANG

A threadpool worker thread entered a callback, which left with preferred languages set.

This is unexpected, indicating that the callback missed clearing them.

0xC0000720

STATUS_CALLBACK_RETURNED_PRI_BACK

A threadpool worker thread entered a callback, which left with background priorities set.

This is unexpected, indicating that the callback missed restoring the original priorities.

0xC0000800

STATUS_DISK_REPAIR_DISABLED

The attempted operation required self healing to be enabled.

0xC0000801

STATUS_DS_DOMAIN_RENAME_IN_PROGRESS

The directory service cannot perform the requested operation because a domain rename operation is in progress.

0xC0000802

STATUS_DISK_QUOTA_EXCEEDED

An operation failed because the storage quota was exceeded.

0xC0000804

STATUS_CONTENT_BLOCKED

An operation failed because the content was blocked.

0xC0000805

STATUS_BAD_CLUSTERS

The operation could not be completed due to bad clusters on disk.

0xC0000806

STATUS_VOLUME_DIRTY

The operation could not be completed because the volume is dirty. Please run the Chkdsk utility and try again.

0xC0000901

STATUS_FILE_CHECKED_OUT

This file is checked out or locked for editing by another user.

0xC0000902

STATUS_CHECKOUT_REQUIRED

The file must be checked out before saving changes.

0xC0000903

STATUS_BAD_FILE_TYPE

The file type being saved or retrieved has been blocked.

0xC0000904

STATUS_FILE_TOO_LARGE

The file size exceeds the limit allowed and cannot be saved.

0xC0000905

STATUS_FORMS_AUTH_REQUIRED

Access Denied. Before opening files in this location, you must first browse to the e.g. site and select the option to log on automatically.

0xC0000906

STATUS_VIRUS_INFECTED

The operation did not complete successfully because the file contains a virus.

0xC0000907

STATUS_VIRUS_DELETED

This file contains a virus and cannot be opened. Due to the nature of this virus, the file has been removed from this location.

0xC0000908

STATUS_BAD_MCFG_TABLE

The resources required for this device conflict with the MCFG table.

0xC0000909

STATUS_CANNOT_BREAK_OPLOCK

The operation did not complete successfully because it would cause an oplock to be broken. The caller has requested that existing oplocks not be broken.

0xC0009898

STATUS_WOW_ASSERTION

WOW Assertion Error.

0xC000A000

STATUS_INVALID_SIGNATURE

The cryptographic signature is invalid.

0xC000A001

STATUS_HMAC_NOT_SUPPORTED

The cryptographic provider does not support HMAC.

0xC000A010

STATUS_IPSEC_QUEUE_OVERFLOW

The IPsec queue overflowed.

0xC000A011

STATUS_ND_QUEUE_OVERFLOW

The neighbor discovery queue overflowed.

0xC000A012

STATUS_HOPLIMIT_EXCEEDED

An Internet Control Message Protocol (ICMP) hop limit exceeded error was received.

0xC000A013

STATUS_PROTOCOL_NOT_SUPPORTED

The protocol is not installed on the local machine.

0xC000A080

STATUS_LOST_WRITEBEHIND_DATA_NETWORK_DISCONNECTED

{Delayed Write Failed} Windows was unable to save all the data for the file %hs; the data has been lost. This error might be caused by network connectivity issues. Try to save this file elsewhere.

0xC000A081

STATUS_LOST_WRITEBEHIND_DATA_NETWORK_SERVER_ERROR

{Delayed Write Failed} Windows was unable to save all the data for the file %hs; the data has been lost. This error was returned by the server on which the file exists. Try to save this file elsewhere.

0xC000A082

STATUS_LOST_WRITEBEHIND_DATA_LOCAL_DISK_ERROR

{Delayed Write Failed} Windows was unable to save all the data for the file %hs; the data has been lost. This error might be caused if the device has been removed or the media is write-protected.

0xC000A083

STATUS_XML_PARSE_ERROR

Windows was unable to parse the requested XML data.

0xC000A084

STATUS_XMLDSIG_ERROR

An error was encountered while processing an XML digital signature.

0xC000A085

STATUS_WRONG_COMPARTMENT

This indicates that the caller made the connection request in the wrong routing compartment.

0xC000A086

STATUS_AUTHIP_FAILURE

This indicates that there was an AuthIP failure when attempting to connect to the remote host.

0xC000A087

STATUS_DS_OID_MAPPED_GROUP_CANT_HAVE_MEMBERS

OID mapped groups cannot have members.

0xC000A088

STATUS_DS_OID_NOT_FOUND

The specified OID cannot be found.

0xC000A100

STATUS_HASH_NOT_SUPPORTED

Hash generation for the specified version and hash type is not enabled on server.

0xC000A101

STATUS_HASH_NOT_PRESENT

The hash requests is not present or not up to date with the current file contents.

0xC000A2A1

STATUS_OFFLOAD_READ_FLT_NOT_SUPPORTED

A file system filter on the server has not opted in for Offload Read support.

0xC000A2A2

STATUS_OFFLOAD_WRITE_FLT_NOT_SUPPORTED

A file system filter on the server has not opted in for Offload Write support.

0xC000A2A3

STATUS_OFFLOAD_READ_FILE_NOT_SUPPORTED

Offload read operations cannot be performed on:

0xC000A2A4

STATUS_OFFLOAD_WRITE_FILE_NOT_SUPPORTED

Offload write operations cannot be performed on:

0xC0010001

DBG_NO_STATE_CHANGE

The debugger did not perform a state change.

0xC0010002

DBG_APP_NOT_IDLE

The debugger found that the application is not idle.

0xC0020001

RPC_NT_INVALID_STRING_BINDING

The string binding is invalid.

0xC0020002

RPC_NT_WRONG_KIND_OF_BINDING

The binding handle is not the correct type.

0xC0020003

RPC_NT_INVALID_BINDING

The binding handle is invalid.

0xC0020004

RPC_NT_PROTSEQ_NOT_SUPPORTED

The RPC protocol sequence is not supported.

0xC0020005

RPC_NT_INVALID_RPC_PROTSEQ

The RPC protocol sequence is invalid.

0xC0020006

RPC_NT_INVALID_STRING_UUID

The string UUID is invalid.

0xC0020007

RPC_NT_INVALID_ENDPOINT_FORMAT

The endpoint format is invalid.

0xC0020008

RPC_NT_INVALID_NET_ADDR

The network address is invalid.

0xC0020009

RPC_NT_NO_ENDPOINT_FOUND

No endpoint was found.

0xC002000A

RPC_NT_INVALID_TIMEOUT

The time-out value is invalid.

0xC002000B

RPC_NT_OBJECT_NOT_FOUND

The object UUID was not found.

0xC002000C

RPC_NT_ALREADY_REGISTERED

The object UUID has already been registered.

0xC002000D

RPC_NT_TYPE_ALREADY_REGISTERED

The type UUID has already been registered.

0xC002000E

RPC_NT_ALREADY_LISTENING

The RPC server is already listening.

0xC002000F

RPC_NT_NO_PROTSEQS_REGISTERED

No protocol sequences have been registered.

0xC0020010

RPC_NT_NOT_LISTENING

The RPC server is not listening.

0xC0020011

RPC_NT_UNKNOWN_MGR_TYPE

The manager type is unknown.

0xC0020012

RPC_NT_UNKNOWN_IF

The interface is unknown.

0xC0020013

RPC_NT_NO_BINDINGS

There are no bindings.

0xC0020014

RPC_NT_NO_PROTSEQS

There are no protocol sequences.

0xC0020015

RPC_NT_CANT_CREATE_ENDPOINT

The endpoint cannot be created.

0xC0020016

RPC_NT_OUT_OF_RESOURCES

Insufficient resources are available to complete this operation.

0xC0020017

RPC_NT_SERVER_UNAVAILABLE

The RPC server is unavailable.

0xC0020018

RPC_NT_SERVER_TOO_BUSY

The RPC server is too busy to complete this operation.

0xC0020019

RPC_NT_INVALID_NETWORK_OPTIONS

The network options are invalid.

0xC002001A

RPC_NT_NO_CALL_ACTIVE

No RPCs are active on this thread.

0xC002001B

RPC_NT_CALL_FAILED

The RPC failed.

0xC002001C

RPC_NT_CALL_FAILED_DNE

The RPC failed and did not execute.

0xC002001D

RPC_NT_PROTOCOL_ERROR

An RPC protocol error occurred.

0xC002001F

RPC_NT_UNSUPPORTED_TRANS_SYN

The RPC server does not support the transfer syntax.

0xC0020021

RPC_NT_UNSUPPORTED_TYPE

The type UUID is not supported.

0xC0020022

RPC_NT_INVALID_TAG

The tag is invalid.

0xC0020023

RPC_NT_INVALID_BOUND

The array bounds are invalid.

0xC0020024

RPC_NT_NO_ENTRY_NAME

The binding does not contain an entry name.

0xC0020025

RPC_NT_INVALID_NAME_SYNTAX

The name syntax is invalid.

0xC0020026

RPC_NT_UNSUPPORTED_NAME_SYNTAX

The name syntax is not supported.

0xC0020028

RPC_NT_UUID_NO_ADDRESS

No network address is available to construct a UUID.

0xC0020029

RPC_NT_DUPLICATE_ENDPOINT

The endpoint is a duplicate.

0xC002002A

RPC_NT_UNKNOWN_AUTHN_TYPE

The authentication type is unknown.

0xC002002B

RPC_NT_MAX_CALLS_TOO_SMALL

The maximum number of calls is too small.

0xC002002C

RPC_NT_STRING_TOO_LONG

The string is too long.

0xC002002D

RPC_NT_PROTSEQ_NOT_FOUND

The RPC protocol sequence was not found.

0xC002002E

RPC_NT_PROCNUM_OUT_OF_RANGE

The procedure number is out of range.

0xC002002F

RPC_NT_BINDING_HAS_NO_AUTH

The binding does not contain any authentication information.

0xC0020030

RPC_NT_UNKNOWN_AUTHN_SERVICE

The authentication service is unknown.

0xC0020031

RPC_NT_UNKNOWN_AUTHN_LEVEL

The authentication level is unknown.

0xC0020032

RPC_NT_INVALID_AUTH_IDENTITY

The security context is invalid.

0xC0020033

RPC_NT_UNKNOWN_AUTHZ_SERVICE

The authorization service is unknown.

0xC0020034

EPT_NT_INVALID_ENTRY

The entry is invalid.

0xC0020035

EPT_NT_CANT_PERFORM_OP

The operation cannot be performed.

0xC0020036

EPT_NT_NOT_REGISTERED

No more endpoints are available from the endpoint mapper.

0xC0020037

RPC_NT_NOTHING_TO_EXPORT

No interfaces have been exported.

0xC0020038

RPC_NT_INCOMPLETE_NAME

The entry name is incomplete.

0xC0020039

RPC_NT_INVALID_VERS_OPTION

The version option is invalid.

0xC002003A

RPC_NT_NO_MORE_MEMBERS

There are no more members.

0xC002003B

RPC_NT_NOT_ALL_OBJS_UNEXPORTED

There is nothing to unexport.

0xC002003C

RPC_NT_INTERFACE_NOT_FOUND

The interface was not found.

0xC002003D

RPC_NT_ENTRY_ALREADY_EXISTS

The entry already exists.

0xC002003E

RPC_NT_ENTRY_NOT_FOUND

The entry was not found.

0xC002003F

RPC_NT_NAME_SERVICE_UNAVAILABLE

The name service is unavailable.

0xC0020040

RPC_NT_INVALID_NAF_ID

The network address family is invalid.

0xC0020041

RPC_NT_CANNOT_SUPPORT

The requested operation is not supported.

0xC0020042

RPC_NT_NO_CONTEXT_AVAILABLE

No security context is available to allow impersonation.

0xC0020043

RPC_NT_INTERNAL_ERROR

An internal error occurred in the RPC.

0xC0020044

RPC_NT_ZERO_DIVIDE

The RPC server attempted to divide an integer by zero.

0xC0020045

RPC_NT_ADDRESS_ERROR

An addressing error occurred in the RPC server.

0xC0020046

RPC_NT_FP_DIV_ZERO

A floating point operation at the RPC server caused a divide by zero.

0xC0020047

RPC_NT_FP_UNDERFLOW

A floating point underflow occurred at the RPC server.

0xC0020048

RPC_NT_FP_OVERFLOW

A floating point overflow occurred at the RPC server.

0xC0020049

RPC_NT_CALL_IN_PROGRESS

An RPC is already in progress for this thread.

0xC002004A

RPC_NT_NO_MORE_BINDINGS

There are no more bindings.

0xC002004B

RPC_NT_GROUP_MEMBER_NOT_FOUND

The group member was not found.

0xC002004C

EPT_NT_CANT_CREATE

The endpoint mapper database entry could not be created.

0xC002004D

RPC_NT_INVALID_OBJECT

The object UUID is the nil UUID.

0xC002004F

RPC_NT_NO_INTERFACES

No interfaces have been registered.

0xC0020050

RPC_NT_CALL_CANCELLED

The RPC was canceled.

0xC0020051

RPC_NT_BINDING_INCOMPLETE

The binding handle does not contain all the required information.

0xC0020052

RPC_NT_COMM_FAILURE

A communications failure occurred during an RPC.

0xC0020053

RPC_NT_UNSUPPORTED_AUTHN_LEVEL

The requested authentication level is not supported.

0xC0020054

RPC_NT_NO_PRINC_NAME

No principal name was registered.

0xC0020055

RPC_NT_NOT_RPC_ERROR

The error specified is not a valid Windows RPC error code.

0xC0020057

RPC_NT_SEC_PKG_ERROR

A security package-specific error occurred.

0xC0020058

RPC_NT_NOT_CANCELLED

The thread was not canceled.

0xC0020062

RPC_NT_INVALID_ASYNC_HANDLE

Invalid asynchronous RPC handle.

0xC0020063

RPC_NT_INVALID_ASYNC_CALL

Invalid asynchronous RPC call handle for this operation.

0xC0020064

RPC_NT_PROXY_ACCESS_DENIED

Access to the HTTP proxy is denied.

0xC0030001

RPC_NT_NO_MORE_ENTRIES

The list of RPC servers available for auto-handle binding has been exhausted.

0xC0030002

RPC_NT_SS_CHAR_TRANS_OPEN_FAIL

The file designated by DCERPCCHARTRANS cannot be opened.

0xC0030003

RPC_NT_SS_CHAR_TRANS_SHORT_FILE

The file containing the character translation table has fewer than 512 bytes.

0xC0030004

RPC_NT_SS_IN_NULL_CONTEXT

A null context handle is passed as an [in] parameter.

0xC0030005

RPC_NT_SS_CONTEXT_MISMATCH

The context handle does not match any known context handles.

0xC0030006

RPC_NT_SS_CONTEXT_DAMAGED

The context handle changed during a call.

0xC0030007

RPC_NT_SS_HANDLES_MISMATCH

The binding handles passed to an RPC do not match.

0xC0030008

RPC_NT_SS_CANNOT_GET_CALL_HANDLE

The stub is unable to get the call handle.

0xC0030009

RPC_NT_NULL_REF_POINTER

A null reference pointer was passed to the stub.

0xC003000A

RPC_NT_ENUM_VALUE_OUT_OF_RANGE

The enumeration value is out of range.

0xC003000B

RPC_NT_BYTE_COUNT_TOO_SMALL

The byte count is too small.

0xC003000C

RPC_NT_BAD_STUB_DATA

The stub received bad data.

0xC0030059

RPC_NT_INVALID_ES_ACTION

Invalid operation on the encoding/decoding handle.

0xC003005A

RPC_NT_WRONG_ES_VERSION

Incompatible version of the serializing package.

0xC003005B

RPC_NT_WRONG_STUB_VERSION

Incompatible version of the RPC stub.

0xC003005C

RPC_NT_INVALID_PIPE_OBJECT

The RPC pipe object is invalid or corrupt.

0xC003005D

RPC_NT_INVALID_PIPE_OPERATION

An invalid operation was attempted on an RPC pipe object.

0xC003005E

RPC_NT_WRONG_PIPE_VERSION

Unsupported RPC pipe version.

0xC003005F

RPC_NT_PIPE_CLOSED

The RPC pipe object has already been closed.

0xC0030060

RPC_NT_PIPE_DISCIPLINE_ERROR

The RPC call completed before all pipes were processed.

0xC0030061

RPC_NT_PIPE_EMPTY

No more data is available from the RPC pipe.

0xC0040035

STATUS_PNP_BAD_MPS_TABLE

A device is missing in the system BIOS MPS table. This device will not be used. Contact your system vendor for a system BIOS update.

0xC0040036

STATUS_PNP_TRANSLATION_FAILED

A translator failed to translate resources.

0xC0040037

STATUS_PNP_IRQ_TRANSLATION_FAILED

An IRQ translator failed to translate resources.

0xC0040038

STATUS_PNP_INVALID_ID

Driver %2 returned an invalid ID for a child device (%3).

0xC0040039

STATUS_IO_REISSUE_AS_CACHED

Reissue the given operation as a cached I/O operation

0xC00A0001

STATUS_CTX_WINSTATION_NAME_INVALID

Session name %1 is invalid.

0xC00A0002

STATUS_CTX_INVALID_PD

The protocol driver %1 is invalid.

0xC00A0003

STATUS_CTX_PD_NOT_FOUND

The protocol driver %1 was not found in the system path.

0xC00A0006

STATUS_CTX_CLOSE_PENDING

A close operation is pending on the terminal connection.

0xC00A0007

STATUS_CTX_NO_OUTBUF

No free output buffers are available.

0xC00A0008

STATUS_CTX_MODEM_INF_NOT_FOUND

The MODEM.INF file was not found.

0xC00A0009

STATUS_CTX_INVALID_MODEMNAME

The modem (%1) was not found in the MODEM.INF file.

0xC00A000A

STATUS_CTX_RESPONSE_ERROR

The modem did not accept the command sent to it. Verify that the configured modem name matches the attached modem.

0xC00A000B

STATUS_CTX_MODEM_RESPONSE_TIMEOUT

The modem did not respond to the command sent to it. Verify that the modem cable is properly attached and the modem is turned on.

0xC00A000C

STATUS_CTX_MODEM_RESPONSE_NO_CARRIER

Carrier detection has failed or the carrier has been dropped due to disconnection.

0xC00A000D

STATUS_CTX_MODEM_RESPONSE_NO_DIALTONE

A dial tone was not detected within the required time. Verify that the phone cable is properly attached and functional.

0xC00A000E

STATUS_CTX_MODEM_RESPONSE_BUSY

A busy signal was detected at a remote site on callback.

0xC00A000F

STATUS_CTX_MODEM_RESPONSE_VOICE

A voice was detected at a remote site on callback.

0xC00A0010

STATUS_CTX_TD_ERROR

Transport driver error.

0xC00A0012

STATUS_CTX_LICENSE_CLIENT_INVALID

The client you are using is not licensed to use this system. Your logon request is denied.

0xC00A0013

STATUS_CTX_LICENSE_NOT_AVAILABLE

The system has reached its licensed logon limit. Try again later.

0xC00A0014

STATUS_CTX_LICENSE_EXPIRED

The system license has expired. Your logon request is denied.

0xC00A0015

STATUS_CTX_WINSTATION_NOT_FOUND

The specified session cannot be found.

0xC00A0016

STATUS_CTX_WINSTATION_NAME_COLLISION

The specified session name is already in use.

0xC00A0017

STATUS_CTX_WINSTATION_BUSY

The requested operation cannot be completed because the terminal connection is currently processing a connect, disconnect, reset, or delete operation.

0xC00A0018

STATUS_CTX_BAD_VIDEO_MODE

An attempt has been made to connect to a session whose video mode is not supported by the current client.

0xC00A0022

STATUS_CTX_GRAPHICS_INVALID

The application attempted to enable DOS graphics mode. DOS graphics mode is not supported.

0xC00A0024

STATUS_CTX_NOT_CONSOLE

The requested operation can be performed only on the system console. This is most often the result of a driver or system DLL requiring direct console access.

0xC00A0026

STATUS_CTX_CLIENT_QUERY_TIMEOUT

The client failed to respond to the server connect message.

0xC00A0027

STATUS_CTX_CONSOLE_DISCONNECT

Disconnecting the console session is not supported.

0xC00A0028

STATUS_CTX_CONSOLE_CONNECT

Reconnecting a disconnected session to the console is not supported.

0xC00A002A

STATUS_CTX_SHADOW_DENIED

The request to control another session remotely was denied.

0xC00A002B

STATUS_CTX_WINSTATION_ACCESS_DENIED

A process has requested access to a session, but has not been granted those access rights.

0xC00A002E

STATUS_CTX_INVALID_WD

The terminal connection driver %1 is invalid.

0xC00A002F

STATUS_CTX_WD_NOT_FOUND

The terminal connection driver %1 was not found in the system path.

0xC00A0030

STATUS_CTX_SHADOW_INVALID

The requested session cannot be controlled remotely. You cannot control your own session, a session that is trying to control your session, a session that has no user logged on, or other sessions from the console.

0xC00A0031

STATUS_CTX_SHADOW_DISABLED

The requested session is not configured to allow remote control.

0xC00A0032

STATUS_RDP_PROTOCOL_ERROR

The RDP protocol component %2 detected an error in the protocol stream and has disconnected the client.

0xC00A0033

STATUS_CTX_CLIENT_LICENSE_NOT_SET

Your request to connect to this terminal server has been rejected. Your terminal server client license number has not been entered for this copy of the terminal client. Contact your system administrator for help in entering a valid, unique license number for this terminal server client. Click OK to continue.

0xC00A0034

STATUS_CTX_CLIENT_LICENSE_IN_USE

Your request to connect to this terminal server has been rejected. Your terminal server client license number is currently being used by another user. Contact your system administrator to obtain a new copy of the terminal server client with a valid, unique license number. Click OK to continue.

0xC00A0035

STATUS_CTX_SHADOW_ENDED_BY_MODE_CHANGE

The remote control of the console was terminated because the display mode was changed. Changing the display mode in a remote control session is not supported.

0xC00A0036

STATUS_CTX_SHADOW_NOT_RUNNING

Remote control could not be terminated because the specified session is not currently being remotely controlled.

0xC00A0037

STATUS_CTX_LOGON_DISABLED

Your interactive logon privilege has been disabled. Contact your system administrator.

0xC00A0038

STATUS_CTX_SECURITY_LAYER_ERROR

The terminal server security layer detected an error in the protocol stream and has disconnected the client.

0xC00A0039

STATUS_TS_INCOMPATIBLE_SESSIONS

The target session is incompatible with the current session.

0xC00B0001

STATUS_MUI_FILE_NOT_FOUND

The resource loader failed to find an MUI file.

0xC00B0002

STATUS_MUI_INVALID_FILE

The resource loader failed to load an MUI file because the file failed to pass validation.

0xC00B0003

STATUS_MUI_INVALID_RC_CONFIG

The RC manifest is corrupted with garbage data, is an unsupported version, or is missing a required item.

0xC00B0004

STATUS_MUI_INVALID_LOCALE_NAME

The RC manifest has an invalid culture name.

0xC00B0005

STATUS_MUI_INVALID_ULTIMATEFALLBACK_NAME

The RC manifest has and invalid ultimate fallback name.

0xC00B0006

STATUS_MUI_FILE_NOT_LOADED

The resource loader cache does not have a loaded MUI entry.

0xC00B0007

STATUS_RESOURCE_ENUM_USER_STOP

The user stopped resource enumeration.

0xC0130001

STATUS_CLUSTER_INVALID_NODE

The cluster node is not valid.

0xC0130002

STATUS_CLUSTER_NODE_EXISTS

The cluster node already exists.

0xC0130003

STATUS_CLUSTER_JOIN_IN_PROGRESS

A node is in the process of joining the cluster.

0xC0130004

STATUS_CLUSTER_NODE_NOT_FOUND

The cluster node was not found.

0xC0130005

STATUS_CLUSTER_LOCAL_NODE_NOT_FOUND

The cluster local node information was not found.

0xC0130006

STATUS_CLUSTER_NETWORK_EXISTS

The cluster network already exists.

0xC0130007

STATUS_CLUSTER_NETWORK_NOT_FOUND

The cluster network was not found.

0xC0130008

STATUS_CLUSTER_NETINTERFACE_EXISTS

The cluster network interface already exists.

0xC0130009

STATUS_CLUSTER_NETINTERFACE_NOT_FOUND

The cluster network interface was not found.

0xC013000A

STATUS_CLUSTER_INVALID_REQUEST

The cluster request is not valid for this object.

0xC013000B

STATUS_CLUSTER_INVALID_NETWORK_PROVIDER

The cluster network provider is not valid.

0xC013000C

STATUS_CLUSTER_NODE_DOWN

The cluster node is down.

0xC013000D

STATUS_CLUSTER_NODE_UNREACHABLE

The cluster node is not reachable.

0xC013000E

STATUS_CLUSTER_NODE_NOT_MEMBER

The cluster node is not a member of the cluster.

0xC013000F

STATUS_CLUSTER_JOIN_NOT_IN_PROGRESS

A cluster join operation is not in progress.

0xC0130010

STATUS_CLUSTER_INVALID_NETWORK

The cluster network is not valid.

0xC0130011

STATUS_CLUSTER_NO_NET_ADAPTERS

No network adapters are available.

0xC0130012

STATUS_CLUSTER_NODE_UP

The cluster node is up.

0xC0130013

STATUS_CLUSTER_NODE_PAUSED

The cluster node is paused.

0xC0130014

STATUS_CLUSTER_NODE_NOT_PAUSED

The cluster node is not paused.

0xC0130015

STATUS_CLUSTER_NO_SECURITY_CONTEXT

No cluster security context is available.

0xC0130016

STATUS_CLUSTER_NETWORK_NOT_INTERNAL

The cluster network is not configured for internal cluster communication.

0xC0130017

STATUS_CLUSTER_POISONED

The cluster node has been poisoned.

0xC0140001

STATUS_ACPI_INVALID_OPCODE

An attempt was made to run an invalid AML opcode.

0xC0140002

STATUS_ACPI_STACK_OVERFLOW

The AML interpreter stack has overflowed.

0xC0140003

STATUS_ACPI_ASSERT_FAILED

An inconsistent state has occurred.

0xC0140004

STATUS_ACPI_INVALID_INDEX

An attempt was made to access an array outside its bounds.

0xC0140005

STATUS_ACPI_INVALID_ARGUMENT

A required argument was not specified.

0xC0140006

STATUS_ACPI_FATAL

A fatal error has occurred.

0xC0140007

STATUS_ACPI_INVALID_SUPERNAME

An invalid SuperName was specified.

0xC0140008

STATUS_ACPI_INVALID_ARGTYPE

An argument with an incorrect type was specified.

0xC0140009

STATUS_ACPI_INVALID_OBJTYPE

An object with an incorrect type was specified.

0xC014000A

STATUS_ACPI_INVALID_TARGETTYPE

A target with an incorrect type was specified.

0xC014000B

STATUS_ACPI_INCORRECT_ARGUMENT_COUNT

An incorrect number of arguments was specified.

0xC014000C

STATUS_ACPI_ADDRESS_NOT_MAPPED

An address failed to translate.

0xC014000D

STATUS_ACPI_INVALID_EVENTTYPE

An incorrect event type was specified.

0xC014000E

STATUS_ACPI_HANDLER_COLLISION

A handler for the target already exists.

0xC014000F

STATUS_ACPI_INVALID_DATA

Invalid data for the target was specified.

0xC0140010

STATUS_ACPI_INVALID_REGION

An invalid region for the target was specified.

0xC0140011

STATUS_ACPI_INVALID_ACCESS_SIZE

An attempt was made to access a field outside the defined range.

0xC0140012

STATUS_ACPI_ACQUIRE_GLOBAL_LOCK

The global system lock could not be acquired.

0xC0140013

STATUS_ACPI_ALREADY_INITIALIZED

An attempt was made to reinitialize the ACPI subsystem.

0xC0140014

STATUS_ACPI_NOT_INITIALIZED

The ACPI subsystem has not been initialized.

0xC0140015

STATUS_ACPI_INVALID_MUTEX_LEVEL

An incorrect mutex was specified.

0xC0140016

STATUS_ACPI_MUTEX_NOT_OWNED

The mutex is not currently owned.

0xC0140017

STATUS_ACPI_MUTEX_NOT_OWNER

An attempt was made to access the mutex by a process that was not the owner.

0xC0140018

STATUS_ACPI_RS_ACCESS

An error occurred during an access to region space.

0xC0140019

STATUS_ACPI_INVALID_TABLE

An attempt was made to use an incorrect table.

0xC0140020

STATUS_ACPI_REG_HANDLER_FAILED

The registration of an ACPI event failed.

0xC0140021

STATUS_ACPI_POWER_REQUEST_FAILED

An ACPI power object failed to transition state.

0xC0150001

STATUS_SXS_SECTION_NOT_FOUND

The requested section is not present in the activation context.

0xC0150002

STATUS_SXS_CANT_GEN_ACTCTX

Windows was unble to process the application binding information. Refer to the system event log for further information.

0xC0150003

STATUS_SXS_INVALID_ACTCTXDATA_FORMAT

The application binding data format is invalid.

0xC0150004

STATUS_SXS_ASSEMBLY_NOT_FOUND

The referenced assembly is not installed on the system.

0xC0150005

STATUS_SXS_MANIFEST_FORMAT_ERROR

The manifest file does not begin with the required tag and format information.

0xC0150006

STATUS_SXS_MANIFEST_PARSE_ERROR

The manifest file contains one or more syntax errors.

0xC0150007

STATUS_SXS_ACTIVATION_CONTEXT_DISABLED

The application attempted to activate a disabled activation context.

0xC0150008

STATUS_SXS_KEY_NOT_FOUND

The requested lookup key was not found in any active activation context.

0xC0150009

STATUS_SXS_VERSION_CONFLICT

A component version required by the application conflicts with another component version that is already active.

0xC015000A

STATUS_SXS_WRONG_SECTION_TYPE

The type requested activation context section does not match the query API used.

0xC015000B

STATUS_SXS_THREAD_QUERIES_DISABLED

Lack of system resources has required isolated activation to be disabled for the current thread of execution.

0xC015000C

STATUS_SXS_ASSEMBLY_MISSING

The referenced assembly could not be found.

0xC015000E

STATUS_SXS_PROCESS_DEFAULT_ALREADY_SET

An attempt to set the process default activation context failed because the process default activation context was already set.

0xC015000F

STATUS_SXS_EARLY_DEACTIVATION

The activation context being deactivated is not the most recently activated one.

0xC0150010

STATUS_SXS_INVALID_DEACTIVATION

The activation context being deactivated is not active for the current thread of execution.

0xC0150011

STATUS_SXS_MULTIPLE_DEACTIVATION

The activation context being deactivated has already been deactivated.

0xC0150012

STATUS_SXS_SYSTEM_DEFAULT_ACTIVATION_CONTEXT_EMPTY

The activation context of the system default assembly could not be generated.

0xC0150013

STATUS_SXS_PROCESS_TERMINATION_REQUESTED

A component used by the isolation facility has requested that the process be terminated.

0xC0150014

STATUS_SXS_CORRUPT_ACTIVATION_STACK

The activation context activation stack for the running thread of execution is corrupt.

0xC0150015

STATUS_SXS_CORRUPTION

The application isolation metadata for this process or thread has become corrupt.

0xC0150016

STATUS_SXS_INVALID_IDENTITY_ATTRIBUTE_VALUE

The value of an attribute in an identity is not within the legal range.

0xC0150017

STATUS_SXS_INVALID_IDENTITY_ATTRIBUTE_NAME

The name of an attribute in an identity is not within the legal range.

0xC0150018

STATUS_SXS_IDENTITY_DUPLICATE_ATTRIBUTE

An identity contains two definitions for the same attribute.

0xC0150019

STATUS_SXS_IDENTITY_PARSE_ERROR

The identity string is malformed. This might be due to a trailing comma, more than two unnamed attributes, a missing attribute name, or a missing attribute value.

0xC015001A

STATUS_SXS_COMPONENT_STORE_CORRUPT

The component store has become corrupted.

0xC015001B

STATUS_SXS_FILE_HASH_MISMATCH

A component's file does not match the verification information present in the component manifest.

0xC015001C

STATUS_SXS_MANIFEST_IDENTITY_SAME_BUT_CONTENTS_DIFFERENT

The identities of the manifests are identical, but their contents are different.

0xC015001D

STATUS_SXS_IDENTITIES_DIFFERENT

The component identities are different.

0xC015001E

STATUS_SXS_ASSEMBLY_IS_NOT_A_DEPLOYMENT

The assembly is not a deployment.

0xC015001F

STATUS_SXS_FILE_NOT_PART_OF_ASSEMBLY

The file is not a part of the assembly.

0xC0150020

STATUS_ADVANCED_INSTALLER_FAILED

An advanced installer failed during setup or servicing.

0xC0150021

STATUS_XML_ENCODING_MISMATCH

The character encoding in the XML declaration did not match the encoding used in the document.

0xC0150022

STATUS_SXS_MANIFEST_TOO_BIG

The size of the manifest exceeds the maximum allowed.

0xC0150023

STATUS_SXS_SETTING_NOT_REGISTERED

The setting is not registered.

0xC0150024

STATUS_SXS_TRANSACTION_CLOSURE_INCOMPLETE

One or more required transaction members are not present.

0xC0150025

STATUS_SMI_PRIMITIVE_INSTALLER_FAILED

The SMI primitive installer failed during setup or servicing.

0xC0150026

STATUS_GENERIC_COMMAND_FAILED

A generic command executable returned a result that indicates failure.

0xC0150027

STATUS_SXS_FILE_HASH_MISSING

A component is missing file verification information in its manifest.

0xC0190001

STATUS_TRANSACTIONAL_CONFLICT

The function attempted to use a name that is reserved for use by another transaction.

0xC0190002

STATUS_INVALID_TRANSACTION

The transaction handle associated with this operation is invalid.

0xC0190003

STATUS_TRANSACTION_NOT_ACTIVE

The requested operation was made in the context of a transaction that is no longer active.

0xC0190004

STATUS_TM_INITIALIZATION_FAILED

The transaction manager was unable to be successfully initialized. Transacted operations are not supported.

0xC0190005

STATUS_RM_NOT_ACTIVE

Transaction support within the specified file system resource manager was not started or was shut down due to an error.

0xC0190006

STATUS_RM_METADATA_CORRUPT

The metadata of the resource manager has been corrupted. The resource manager will not function.

0xC0190007

STATUS_TRANSACTION_NOT_JOINED

The resource manager attempted to prepare a transaction that it has not successfully joined.

0xC0190008

STATUS_DIRECTORY_NOT_RM

The specified directory does not contain a file system resource manager.

0xC019000A

STATUS_TRANSACTIONS_UNSUPPORTED_REMOTE

The remote server or share does not support transacted file operations.

0xC019000B

STATUS_LOG_RESIZE_INVALID_SIZE

The requested log size for the file system resource manager is invalid.

0xC019000C

STATUS_REMOTE_FILE_VERSION_MISMATCH

The remote server sent mismatching version number or Fid for a file opened with transactions.

0xC019000F

STATUS_CRM_PROTOCOL_ALREADY_EXISTS

The resource manager tried to register a protocol that already exists.

0xC0190010

STATUS_TRANSACTION_PROPAGATION_FAILED

The attempt to propagate the transaction failed.

0xC0190011

STATUS_CRM_PROTOCOL_NOT_FOUND

The requested propagation protocol was not registered as a CRM.

0xC0190012

STATUS_TRANSACTION_SUPERIOR_EXISTS

The transaction object already has a superior enlistment, and the caller attempted an operation that would have created a new superior. Only a single superior enlistment is allowed.

0xC0190013

STATUS_TRANSACTION_REQUEST_NOT_VALID

The requested operation is not valid on the transaction object in its current state.

0xC0190014

STATUS_TRANSACTION_NOT_REQUESTED

The caller has called a response API, but the response is not expected because the transaction manager did not issue the corresponding request to the caller.

0xC0190015

STATUS_TRANSACTION_ALREADY_ABORTED

It is too late to perform the requested operation, because the transaction has already been aborted.

0xC0190016

STATUS_TRANSACTION_ALREADY_COMMITTED

It is too late to perform the requested operation, because the transaction has already been committed.

0xC0190017

STATUS_TRANSACTION_INVALID_MARSHALL_BUFFER

The buffer passed in to NtPushTransaction or NtPullTransaction is not in a valid format.

0xC0190018

STATUS_CURRENT_TRANSACTION_NOT_VALID

The current transaction context associated with the thread is not a valid handle to a transaction object.

0xC0190019

STATUS_LOG_GROWTH_FAILED

An attempt to create space in the transactional resource manager's log failed. The failure status has been recorded in the event log.

0xC0190021

STATUS_OBJECT_NO_LONGER_EXISTS

The object (file, stream, or link) that corresponds to the handle has been deleted by a transaction savepoint rollback.

0xC0190022

STATUS_STREAM_MINIVERSION_NOT_FOUND

The specified file miniversion was not found for this transacted file open.

0xC0190023

STATUS_STREAM_MINIVERSION_NOT_VALID

The specified file miniversion was found but has been invalidated. The most likely cause is a transaction savepoint rollback.

0xC0190024

STATUS_MINIVERSION_INACCESSIBLE_FROM_SPECIFIED_TRANSACTION

A miniversion can be opened only in the context of the transaction that created it.

0xC0190025

STATUS_CANT_OPEN_MINIVERSION_WITH_MODIFY_INTENT

It is not possible to open a miniversion with modify access.

0xC0190026

STATUS_CANT_CREATE_MORE_STREAM_MINIVERSIONS

It is not possible to create any more miniversions for this stream.

0xC0190028

STATUS_HANDLE_NO_LONGER_VALID

The handle has been invalidated by a transaction. The most likely cause is the presence of memory mapping on a file or an open handle when the transaction ended or rolled back to savepoint.

0xC0190030

STATUS_LOG_CORRUPTION_DETECTED

The log data is corrupt.

0xC0190032

STATUS_RM_DISCONNECTED

The transaction outcome is unavailable because the resource manager responsible for it is disconnected.

0xC0190033

STATUS_ENLISTMENT_NOT_SUPERIOR

The request was rejected because the enlistment in question is not a superior enlistment.

0xC0190036

STATUS_FILE_IDENTITY_NOT_PERSISTENT

The file cannot be opened in a transaction because its identity depends on the outcome of an unresolved transaction.

0xC0190037

STATUS_CANT_BREAK_TRANSACTIONAL_DEPENDENCY

The operation cannot be performed because another transaction is depending on this property not changing.

0xC0190038

STATUS_CANT_CROSS_RM_BOUNDARY

The operation would involve a single file with two transactional resource managers and is, therefore, not allowed.

0xC0190039

STATUS_TXF_DIR_NOT_EMPTY

The $Txf directory must be empty for this operation to succeed.

0xC019003A

STATUS_INDOUBT_TRANSACTIONS_EXIST

The operation would leave a transactional resource manager in an inconsistent state and is therefore not allowed.

0xC019003B

STATUS_TM_VOLATILE

The operation could not be completed because the transaction manager does not have a log.

0xC019003C

STATUS_ROLLBACK_TIMER_EXPIRED

A rollback could not be scheduled because a previously scheduled rollback has already executed or been queued for execution.

0xC019003D

STATUS_TXF_ATTRIBUTE_CORRUPT

The transactional metadata attribute on the file or directory %hs is corrupt and unreadable.

0xC019003E

STATUS_EFS_NOT_ALLOWED_IN_TRANSACTION

The encryption operation could not be completed because a transaction is active.

0xC019003F

STATUS_TRANSACTIONAL_OPEN_NOT_ALLOWED

This object is not allowed to be opened in a transaction.

0xC0190040

STATUS_TRANSACTED_MAPPING_UNSUPPORTED_REMOTE

Memory mapping (creating a mapped section) a remote file under a transaction is not supported.

0xC0190043

STATUS_TRANSACTION_REQUIRED_PROMOTION

Promotion was required to allow the resource manager to enlist, but the transaction was set to disallow it.

0xC0190044

STATUS_CANNOT_EXECUTE_FILE_IN_TRANSACTION

This file is open for modification in an unresolved transaction and can be opened for execute only by a transacted reader.

0xC0190045

STATUS_TRANSACTIONS_NOT_FROZEN

The request to thaw frozen transactions was ignored because transactions were not previously frozen.

0xC0190046

STATUS_TRANSACTION_FREEZE_IN_PROGRESS

Transactions cannot be frozen because a freeze is already in progress.

0xC0190047

STATUS_NOT_SNAPSHOT_VOLUME

The target volume is not a snapshot volume. This operation is valid only on a volume mounted as a snapshot.

0xC0190048

STATUS_NO_SAVEPOINT_WITH_OPEN_FILES

The savepoint operation failed because files are open on the transaction, which is not permitted.

0xC0190049

STATUS_SPARSE_NOT_ALLOWED_IN_TRANSACTION

The sparse operation could not be completed because a transaction is active on the file.

0xC019004A

STATUS_TM_IDENTITY_MISMATCH

The call to create a transaction manager object failed because the Tm Identity that is stored in the log file does not match the Tm Identity that was passed in as an argument.

0xC019004B

STATUS_FLOATED_SECTION

I/O was attempted on a section object that has been floated as a result of a transaction ending. There is no valid data.

0xC019004C

STATUS_CANNOT_ACCEPT_TRANSACTED_WORK

The transactional resource manager cannot currently accept transacted work due to a transient condition, such as low resources.

0xC019004D

STATUS_CANNOT_ABORT_TRANSACTIONS

The transactional resource manager had too many transactions outstanding that could not be aborted. The transactional resource manager has been shut down.

0xC019004E

STATUS_TRANSACTION_NOT_FOUND

The specified transaction was unable to be opened because it was not found.

0xC019004F

STATUS_RESOURCEMANAGER_NOT_FOUND

The specified resource manager was unable to be opened because it was not found.

0xC0190050

STATUS_ENLISTMENT_NOT_FOUND

The specified enlistment was unable to be opened because it was not found.

0xC0190051

STATUS_TRANSACTIONMANAGER_NOT_FOUND

The specified transaction manager was unable to be opened because it was not found.

0xC0190052

STATUS_TRANSACTIONMANAGER_NOT_ONLINE

The specified resource manager was unable to create an enlistment because its associated transaction manager is not online.

0xC0190053

STATUS_TRANSACTIONMANAGER_RECOVERY_NAME_COLLISION

The specified transaction manager was unable to create the objects contained in its log file in the Ob namespace. Therefore, the transaction manager was unable to recover.

0xC0190054

STATUS_TRANSACTION_NOT_ROOT

The call to create a superior enlistment on this transaction object could not be completed because the transaction object specified for the enlistment is a subordinate branch of the transaction. Only the root of the transaction can be enlisted as a superior.

0xC0190055

STATUS_TRANSACTION_OBJECT_EXPIRED

Because the associated transaction manager or resource manager has been closed, the handle is no longer valid.

0xC0190056

STATUS_COMPRESSION_NOT_ALLOWED_IN_TRANSACTION

The compression operation could not be completed because a transaction is active on the file.

0xC0190057

STATUS_TRANSACTION_RESPONSE_NOT_ENLISTED

The specified operation could not be performed on this superior enlistment because the enlistment was not created with the corresponding completion response in the NotificationMask.

0xC0190058

STATUS_TRANSACTION_RECORD_TOO_LONG

The specified operation could not be performed because the record to be logged was too long. This can occur because either there are too many enlistments on this transaction or the combined RecoveryInformation being logged on behalf of those enlistments is too long.

0xC0190059

STATUS_NO_LINK_TRACKING_IN_TRANSACTION

The link-tracking operation could not be completed because a transaction is active.

0xC019005A

STATUS_OPERATION_NOT_SUPPORTED_IN_TRANSACTION

This operation cannot be performed in a transaction.

0xC019005B

STATUS_TRANSACTION_INTEGRITY_VIOLATED

The kernel transaction manager had to abort or forget the transaction because it blocked forward progress.

0xC0190060

STATUS_EXPIRED_HANDLE

The handle is no longer properly associated with its transaction.  It might have been opened in a transactional resource manager that was subsequently forced to restart.  Please close the handle and open a new one.

0xC0190061

STATUS_TRANSACTION_NOT_ENLISTED

The specified operation could not be performed because the resource manager is not enlisted in the transaction.

0xC01A0001

STATUS_LOG_SECTOR_INVALID

The log service found an invalid log sector.

0xC01A0002

STATUS_LOG_SECTOR_PARITY_INVALID

The log service encountered a log sector with invalid block parity.

0xC01A0003

STATUS_LOG_SECTOR_REMAPPED

The log service encountered a remapped log sector.

0xC01A0004

STATUS_LOG_BLOCK_INCOMPLETE

The log service encountered a partial or incomplete log block.

0xC01A0005

STATUS_LOG_INVALID_RANGE

The log service encountered an attempt to access data outside the active log range.

0xC01A0006

STATUS_LOG_BLOCKS_EXHAUSTED

The log service user-log marshaling buffers are exhausted.

0xC01A0007

STATUS_LOG_READ_CONTEXT_INVALID

The log service encountered an attempt to read from a marshaling area with an invalid read context.

0xC01A0008

STATUS_LOG_RESTART_INVALID

The log service encountered an invalid log restart area.

0xC01A0009

STATUS_LOG_BLOCK_VERSION

The log service encountered an invalid log block version.

0xC01A000A

STATUS_LOG_BLOCK_INVALID

The log service encountered an invalid log block.

0xC01A000B

STATUS_LOG_READ_MODE_INVALID

The log service encountered an attempt to read the log with an invalid read mode.

0xC01A000D

STATUS_LOG_METADATA_CORRUPT

The log service encountered a corrupted metadata file.

0xC01A000E

STATUS_LOG_METADATA_INVALID

The log service encountered a metadata file that could not be created by the log file system.

0xC01A000F

STATUS_LOG_METADATA_INCONSISTENT

The log service encountered a metadata file with inconsistent data.

0xC01A0010

STATUS_LOG_RESERVATION_INVALID

The log service encountered an attempt to erroneously allocate or dispose reservation space.

0xC01A0011

STATUS_LOG_CANT_DELETE

The log service cannot delete the log file or the file system container.

0xC01A0012

STATUS_LOG_CONTAINER_LIMIT_EXCEEDED

The log service has reached the maximum allowable containers allocated to a log file.

0xC01A0013

STATUS_LOG_START_OF_LOG

The log service has attempted to read or write backward past the start of the log.

0xC01A0014

STATUS_LOG_POLICY_ALREADY_INSTALLED

The log policy could not be installed because a policy of the same type is already present.

0xC01A0015

STATUS_LOG_POLICY_NOT_INSTALLED

The log policy in question was not installed at the time of the request.

0xC01A0016

STATUS_LOG_POLICY_INVALID

The installed set of policies on the log is invalid.

0xC01A0017

STATUS_LOG_POLICY_CONFLICT

A policy on the log in question prevented the operation from completing.

0xC01A0018

STATUS_LOG_PINNED_ARCHIVE_TAIL

The log space cannot be reclaimed because the log is pinned by the archive tail.

0xC01A0019

STATUS_LOG_RECORD_NONEXISTENT

The log record is not a record in the log file.

0xC01A001A

STATUS_LOG_RECORDS_RESERVED_INVALID

The number of reserved log records or the adjustment of the number of reserved log records is invalid.

0xC01A001B

STATUS_LOG_SPACE_RESERVED_INVALID

The reserved log space or the adjustment of the log space is invalid.

0xC01A001C

STATUS_LOG_TAIL_INVALID

A new or existing archive tail or the base of the active log is invalid.

0xC01A001D

STATUS_LOG_FULL

The log space is exhausted.

0xC01A001E

STATUS_LOG_MULTIPLEXED

The log is multiplexed; no direct writes to the physical log are allowed.

0xC01A001F

STATUS_LOG_DEDICATED

The operation failed because the log is dedicated.

0xC01A0020

STATUS_LOG_ARCHIVE_NOT_IN_PROGRESS

The operation requires an archive context.

0xC01A0021

STATUS_LOG_ARCHIVE_IN_PROGRESS

Log archival is in progress.

0xC01A0022

STATUS_LOG_EPHEMERAL

The operation requires a nonephemeral log, but the log is ephemeral.

0xC01A0023

STATUS_LOG_NOT_ENOUGH_CONTAINERS

The log must have at least two containers before it can be read from or written to.

0xC01A0024

STATUS_LOG_CLIENT_ALREADY_REGISTERED

A log client has already registered on the stream.

0xC01A0025

STATUS_LOG_CLIENT_NOT_REGISTERED

A log client has not been registered on the stream.

0xC01A0026

STATUS_LOG_FULL_HANDLER_IN_PROGRESS

A request has already been made to handle the log full condition.

0xC01A0027

STATUS_LOG_CONTAINER_READ_FAILED

The log service encountered an error when attempting to read from a log container.

0xC01A0028

STATUS_LOG_CONTAINER_WRITE_FAILED

The log service encountered an error when attempting to write to a log container.

0xC01A0029

STATUS_LOG_CONTAINER_OPEN_FAILED

The log service encountered an error when attempting to open a log container.

0xC01A002A

STATUS_LOG_CONTAINER_STATE_INVALID

The log service encountered an invalid container state when attempting a requested action.

0xC01A002B

STATUS_LOG_STATE_INVALID

The log service is not in the correct state to perform a requested action.

0xC01A002C

STATUS_LOG_PINNED

The log space cannot be reclaimed because the log is pinned.

0xC01A002D

STATUS_LOG_METADATA_FLUSH_FAILED

The log metadata flush failed.

0xC01A002E

STATUS_LOG_INCONSISTENT_SECURITY

Security on the log and its containers is inconsistent.

0xC01A002F

STATUS_LOG_APPENDED_FLUSH_FAILED

Records were appended to the log or reservation changes were made, but the log could not be flushed.

0xC01A0030

STATUS_LOG_PINNED_RESERVATION

The log is pinned due to reservation consuming most of the log space. Free some reserved records to make space available.

0xC01B00EA

STATUS_VIDEO_HUNG_DISPLAY_DRIVER_THREAD

{Display Driver Stopped Responding} The %hs display driver has stopped working normally. Save your work and reboot the system to restore full display functionality. The next time you reboot the computer, a dialog box will allow you to upload data about this failure to Microsoft.

0xC01C0001

STATUS_FLT_NO_HANDLER_DEFINED

A handler was not defined by the filter for this operation.

0xC01C0002

STATUS_FLT_CONTEXT_ALREADY_DEFINED

A context is already defined for this object.

0xC01C0003

STATUS_FLT_INVALID_ASYNCHRONOUS_REQUEST

Asynchronous requests are not valid for this operation.

0xC01C0004

STATUS_FLT_DISALLOW_FAST_IO

This is an internal error code used by the filter manager to determine if a fast I/O operation should be forced down the input/output request packet (IRP) path. Minifilters should never return this value.

0xC01C0005

STATUS_FLT_INVALID_NAME_REQUEST

An invalid name request was made. The name requested cannot be retrieved at this time.

0xC01C0006

STATUS_FLT_NOT_SAFE_TO_POST_OPERATION

Posting this operation to a worker thread for further processing is not safe at this time because it could lead to a system deadlock.

0xC01C0007

STATUS_FLT_NOT_INITIALIZED

The Filter Manager was not initialized when a filter tried to register. Make sure that the Filter Manager is loaded as a driver.

0xC01C0008

STATUS_FLT_FILTER_NOT_READY

The filter is not ready for attachment to volumes because it has not finished initializing (FltStartFiltering has not been called).

0xC01C0009

STATUS_FLT_POST_OPERATION_CLEANUP

The filter must clean up any operation-specific context at this time because it is being removed from the system before the operation is completed by the lower drivers.

0xC01C000A

STATUS_FLT_INTERNAL_ERROR

The Filter Manager had an internal error from which it cannot recover; therefore, the operation has failed. This is usually the result of a filter returning an invalid value from a pre-operation callback.

0xC01C000B

STATUS_FLT_DELETING_OBJECT

The object specified for this action is in the process of being deleted; therefore, the action requested cannot be completed at this time.

0xC01C000C

STATUS_FLT_MUST_BE_NONPAGED_POOL

A nonpaged pool must be used for this type of context.

0xC01C000D

STATUS_FLT_DUPLICATE_ENTRY

A duplicate handler definition has been provided for an operation.

0xC01C000E

STATUS_FLT_CBDQ_DISABLED

The callback data queue has been disabled.

0xC01C000F

STATUS_FLT_DO_NOT_ATTACH

Do not attach the filter to the volume at this time.

0xC01C0010

STATUS_FLT_DO_NOT_DETACH

Do not detach the filter from the volume at this time.

0xC01C0011

STATUS_FLT_INSTANCE_ALTITUDE_COLLISION

An instance already exists at this altitude on the volume specified.

0xC01C0012

STATUS_FLT_INSTANCE_NAME_COLLISION

An instance already exists with this name on the volume specified.

0xC01C0013

STATUS_FLT_FILTER_NOT_FOUND

The system could not find the filter specified.

0xC01C0014

STATUS_FLT_VOLUME_NOT_FOUND

The system could not find the volume specified.

0xC01C0015

STATUS_FLT_INSTANCE_NOT_FOUND

The system could not find the instance specified.

0xC01C0016

STATUS_FLT_CONTEXT_ALLOCATION_NOT_FOUND

No registered context allocation definition was found for the given request.

0xC01C0017

STATUS_FLT_INVALID_CONTEXT_REGISTRATION

An invalid parameter was specified during context registration.

0xC01C0018

STATUS_FLT_NAME_CACHE_MISS

The name requested was not found in the Filter Manager name cache and could not be retrieved from the file system.

0xC01C0019

STATUS_FLT_NO_DEVICE_OBJECT

The requested device object does not exist for the given volume.

0xC01C001A

STATUS_FLT_VOLUME_ALREADY_MOUNTED

The specified volume is already mounted.

0xC01C001B

STATUS_FLT_ALREADY_ENLISTED

The specified transaction context is already enlisted in a transaction.

0xC01C001C

STATUS_FLT_CONTEXT_ALREADY_LINKED

The specified context is already attached to another object.

0xC01C0020

STATUS_FLT_NO_WAITER_FOR_REPLY

No waiter is present for the filter's reply to this message.

0xC01D0001

STATUS_MONITOR_NO_DESCRIPTOR

A monitor descriptor could not be obtained.

0xC01D0002

STATUS_MONITOR_UNKNOWN_DESCRIPTOR_FORMAT

This release does not support the format of the obtained monitor descriptor.

0xC01D0003

STATUS_MONITOR_INVALID_DESCRIPTOR_CHECKSUM

The checksum of the obtained monitor descriptor is invalid.

0xC01D0004

STATUS_MONITOR_INVALID_STANDARD_TIMING_BLOCK

The monitor descriptor contains an invalid standard timing block.

0xC01D0005

STATUS_MONITOR_WMI_DATABLOCK_REGISTRATION_FAILED

WMI data-block registration failed for one of the MSMonitorClass WMI subclasses.

0xC01D0006

STATUS_MONITOR_INVALID_SERIAL_NUMBER_MONDSC_BLOCK

The provided monitor descriptor block is either corrupted or does not contain the monitor's detailed serial number.

0xC01D0007

STATUS_MONITOR_INVALID_USER_FRIENDLY_MONDSC_BLOCK

The provided monitor descriptor block is either corrupted or does not contain the monitor's user-friendly name.

0xC01D0008

STATUS_MONITOR_NO_MORE_DESCRIPTOR_DATA

There is no monitor descriptor data at the specified (offset or size) region.

0xC01D0009

STATUS_MONITOR_INVALID_DETAILED_TIMING_BLOCK

The monitor descriptor contains an invalid detailed timing block.

0xC01D000A

STATUS_MONITOR_INVALID_MANUFACTURE_DATE

Monitor descriptor contains invalid manufacture date.

0xC01E0000

STATUS_GRAPHICS_NOT_EXCLUSIVE_MODE_OWNER

Exclusive mode ownership is needed to create an unmanaged primary allocation.

0xC01E0001

STATUS_GRAPHICS_INSUFFICIENT_DMA_BUFFER

The driver needs more DMA buffer space to complete the requested operation.

0xC01E0002

STATUS_GRAPHICS_INVALID_DISPLAY_ADAPTER

The specified display adapter handle is invalid.

0xC01E0003

STATUS_GRAPHICS_ADAPTER_WAS_RESET

The specified display adapter and all of its state have been reset.

0xC01E0004

STATUS_GRAPHICS_INVALID_DRIVER_MODEL

The driver stack does not match the expected driver model.

0xC01E0005

STATUS_GRAPHICS_PRESENT_MODE_CHANGED

Present happened but ended up into the changed desktop mode.

0xC01E0006

STATUS_GRAPHICS_PRESENT_OCCLUDED

Nothing to present due to desktop occlusion.

0xC01E0007

STATUS_GRAPHICS_PRESENT_DENIED

Not able to present due to denial of desktop access.

0xC01E0008

STATUS_GRAPHICS_CANNOTCOLORCONVERT

Not able to present with color conversion.

0xC01E000B

STATUS_GRAPHICS_PRESENT_REDIRECTION_DISABLED

Present redirection is disabled (desktop windowing management subsystem is off).

0xC01E000C

STATUS_GRAPHICS_PRESENT_UNOCCLUDED

Previous exclusive VidPn source owner has released its ownership

0xC01E0100

STATUS_GRAPHICS_NO_VIDEO_MEMORY

Not enough video memory is available to complete the operation.

0xC01E0101

STATUS_GRAPHICS_CANT_LOCK_MEMORY

Could not probe and lock the underlying memory of an allocation.

0xC01E0102

STATUS_GRAPHICS_ALLOCATION_BUSY

The allocation is currently busy.

0xC01E0103

STATUS_GRAPHICS_TOO_MANY_REFERENCES

An object being referenced has already reached the maximum reference count and cannot be referenced further.

0xC01E0104

STATUS_GRAPHICS_TRY_AGAIN_LATER

A problem could not be solved due to an existing condition. Try again later.

0xC01E0105

STATUS_GRAPHICS_TRY_AGAIN_NOW

A problem could not be solved due to an existing condition. Try again now.

0xC01E0106

STATUS_GRAPHICS_ALLOCATION_INVALID

The allocation is invalid.

0xC01E0107

STATUS_GRAPHICS_UNSWIZZLING_APERTURE_UNAVAILABLE

No more unswizzling apertures are currently available.

0xC01E0108

STATUS_GRAPHICS_UNSWIZZLING_APERTURE_UNSUPPORTED

The current allocation cannot be unswizzled by an aperture.

0xC01E0109

STATUS_GRAPHICS_CANT_EVICT_PINNED_ALLOCATION

The request failed because a pinned allocation cannot be evicted.

0xC01E0110

STATUS_GRAPHICS_INVALID_ALLOCATION_USAGE

The allocation cannot be used from its current segment location for the specified operation.

0xC01E0111

STATUS_GRAPHICS_CANT_RENDER_LOCKED_ALLOCATION

A locked allocation cannot be used in the current command buffer.

0xC01E0112

STATUS_GRAPHICS_ALLOCATION_CLOSED

The allocation being referenced has been closed permanently.

0xC01E0113

STATUS_GRAPHICS_INVALID_ALLOCATION_INSTANCE

An invalid allocation instance is being referenced.

0xC01E0114

STATUS_GRAPHICS_INVALID_ALLOCATION_HANDLE

An invalid allocation handle is being referenced.

0xC01E0115

STATUS_GRAPHICS_WRONG_ALLOCATION_DEVICE

The allocation being referenced does not belong to the current device.

0xC01E0116

STATUS_GRAPHICS_ALLOCATION_CONTENT_LOST

The specified allocation lost its content.

0xC01E0200

STATUS_GRAPHICS_GPU_EXCEPTION_ON_DEVICE

A GPU exception was detected on the given device. The device cannot be scheduled.

0xC01E0300

STATUS_GRAPHICS_INVALID_VIDPN_TOPOLOGY

The specified VidPN topology is invalid.

0xC01E0301

STATUS_GRAPHICS_VIDPN_TOPOLOGY_NOT_SUPPORTED

The specified VidPN topology is valid but is not supported by this model of the display adapter.

0xC01E0302

STATUS_GRAPHICS_VIDPN_TOPOLOGY_CURRENTLY_NOT_SUPPORTED

The specified VidPN topology is valid but is not currently supported by the display adapter due to allocation of its resources.

0xC01E0303

STATUS_GRAPHICS_INVALID_VIDPN

The specified VidPN handle is invalid.

0xC01E0304

STATUS_GRAPHICS_INVALID_VIDEO_PRESENT_SOURCE

The specified video present source is invalid.

0xC01E0305

STATUS_GRAPHICS_INVALID_VIDEO_PRESENT_TARGET

The specified video present target is invalid.

0xC01E0306

STATUS_GRAPHICS_VIDPN_MODALITY_NOT_SUPPORTED

The specified VidPN modality is not supported (for example, at least two of the pinned modes are not co-functional).

0xC01E0308

STATUS_GRAPHICS_INVALID_VIDPN_SOURCEMODESET

The specified VidPN source mode set is invalid.

0xC01E0309

STATUS_GRAPHICS_INVALID_VIDPN_TARGETMODESET

The specified VidPN target mode set is invalid.

0xC01E030A

STATUS_GRAPHICS_INVALID_FREQUENCY

The specified video signal frequency is invalid.

0xC01E030B

STATUS_GRAPHICS_INVALID_ACTIVE_REGION

The specified video signal active region is invalid.

0xC01E030C

STATUS_GRAPHICS_INVALID_TOTAL_REGION

The specified video signal total region is invalid.

0xC01E0310

STATUS_GRAPHICS_INVALID_VIDEO_PRESENT_SOURCE_MODE

The specified video present source mode is invalid.

0xC01E0311

STATUS_GRAPHICS_INVALID_VIDEO_PRESENT_TARGET_MODE

The specified video present target mode is invalid.

0xC01E0312

STATUS_GRAPHICS_PINNED_MODE_MUST_REMAIN_IN_SET

The pinned mode must remain in the set on the VidPN's co-functional modality enumeration.

0xC01E0313

STATUS_GRAPHICS_PATH_ALREADY_IN_TOPOLOGY

The specified video present path is already in the VidPN's topology.

0xC01E0314

STATUS_GRAPHICS_MODE_ALREADY_IN_MODESET

The specified mode is already in the mode set.

0xC01E0315

STATUS_GRAPHICS_INVALID_VIDEOPRESENTSOURCESET

The specified video present source set is invalid.

0xC01E0316

STATUS_GRAPHICS_INVALID_VIDEOPRESENTTARGETSET

The specified video present target set is invalid.

0xC01E0317

STATUS_GRAPHICS_SOURCE_ALREADY_IN_SET

The specified video present source is already in the video present source set.

0xC01E0318

STATUS_GRAPHICS_TARGET_ALREADY_IN_SET

The specified video present target is already in the video present target set.

0xC01E0319

STATUS_GRAPHICS_INVALID_VIDPN_PRESENT_PATH

The specified VidPN present path is invalid.

0xC01E031A

STATUS_GRAPHICS_NO_RECOMMENDED_VIDPN_TOPOLOGY

The miniport has no recommendation for augmenting the specified VidPN's topology.

0xC01E031B

STATUS_GRAPHICS_INVALID_MONITOR_FREQUENCYRANGESET

The specified monitor frequency range set is invalid.

0xC01E031C

STATUS_GRAPHICS_INVALID_MONITOR_FREQUENCYRANGE

The specified monitor frequency range is invalid.

0xC01E031D

STATUS_GRAPHICS_FREQUENCYRANGE_NOT_IN_SET

The specified frequency range is not in the specified monitor frequency range set.

0xC01E031F

STATUS_GRAPHICS_FREQUENCYRANGE_ALREADY_IN_SET

The specified frequency range is already in the specified monitor frequency range set.

0xC01E0320

STATUS_GRAPHICS_STALE_MODESET

The specified mode set is stale. Reacquire the new mode set.

0xC01E0321

STATUS_GRAPHICS_INVALID_MONITOR_SOURCEMODESET

The specified monitor source mode set is invalid.

0xC01E0322

STATUS_GRAPHICS_INVALID_MONITOR_SOURCE_MODE

The specified monitor source mode is invalid.

0xC01E0323

STATUS_GRAPHICS_NO_RECOMMENDED_FUNCTIONAL_VIDPN

The miniport does not have a recommendation regarding the request to provide a functional VidPN given the current display adapter configuration.

0xC01E0324

STATUS_GRAPHICS_MODE_ID_MUST_BE_UNIQUE

The ID of the specified mode is being used by another mode in the set.

0xC01E0325

STATUS_GRAPHICS_EMPTY_ADAPTER_MONITOR_MODE_SUPPORT_INTERSECTION

The system failed to determine a mode that is supported by both the display adapter and the monitor connected to it.

0xC01E0326

STATUS_GRAPHICS_VIDEO_PRESENT_TARGETS_LESS_THAN_SOURCES

The number of video present targets must be greater than or equal to the number of video present sources.

0xC01E0327

STATUS_GRAPHICS_PATH_NOT_IN_TOPOLOGY

The specified present path is not in the VidPN's topology.

0xC01E0328

STATUS_GRAPHICS_ADAPTER_MUST_HAVE_AT_LEAST_ONE_SOURCE

The display adapter must have at least one video present source.

0xC01E0329

STATUS_GRAPHICS_ADAPTER_MUST_HAVE_AT_LEAST_ONE_TARGET

The display adapter must have at least one video present target.

0xC01E032A

STATUS_GRAPHICS_INVALID_MONITORDESCRIPTORSET

The specified monitor descriptor set is invalid.

0xC01E032B

STATUS_GRAPHICS_INVALID_MONITORDESCRIPTOR

The specified monitor descriptor is invalid.

0xC01E032C

STATUS_GRAPHICS_MONITORDESCRIPTOR_NOT_IN_SET

The specified descriptor is not in the specified monitor descriptor set.

0xC01E032D

STATUS_GRAPHICS_MONITORDESCRIPTOR_ALREADY_IN_SET

The specified descriptor is already in the specified monitor descriptor set.

0xC01E032E

STATUS_GRAPHICS_MONITORDESCRIPTOR_ID_MUST_BE_UNIQUE

The ID of the specified monitor descriptor is being used by another descriptor in the set.

0xC01E032F

STATUS_GRAPHICS_INVALID_VIDPN_TARGET_SUBSET_TYPE

The specified video present target subset type is invalid.

0xC01E0330

STATUS_GRAPHICS_RESOURCES_NOT_RELATED

Two or more of the specified resources are not related to each other, as defined by the interface semantics.

0xC01E0331

STATUS_GRAPHICS_SOURCE_ID_MUST_BE_UNIQUE

The ID of the specified video present source is being used by another source in the set.

0xC01E0332

STATUS_GRAPHICS_TARGET_ID_MUST_BE_UNIQUE

The ID of the specified video present target is being used by another target in the set.

0xC01E0333

STATUS_GRAPHICS_NO_AVAILABLE_VIDPN_TARGET

The specified VidPN source cannot be used because there is no available VidPN target to connect it to.

0xC01E0334

STATUS_GRAPHICS_MONITOR_COULD_NOT_BE_ASSOCIATED_WITH_ADAPTER

The newly arrived monitor could not be associated with a display adapter.

0xC01E0335

STATUS_GRAPHICS_NO_VIDPNMGR

The particular display adapter does not have an associated VidPN manager.

0xC01E0336

STATUS_GRAPHICS_NO_ACTIVE_VIDPN

The VidPN manager of the particular display adapter does not have an active VidPN.

0xC01E0337

STATUS_GRAPHICS_STALE_VIDPN_TOPOLOGY

The specified VidPN topology is stale; obtain the new topology.

0xC01E0338

STATUS_GRAPHICS_MONITOR_NOT_CONNECTED

No monitor is connected on the specified video present target.

0xC01E0339

STATUS_GRAPHICS_SOURCE_NOT_IN_TOPOLOGY

The specified source is not part of the specified VidPN's topology.

0xC01E033A

STATUS_GRAPHICS_INVALID_PRIMARYSURFACE_SIZE

The specified primary surface size is invalid.

0xC01E033B

STATUS_GRAPHICS_INVALID_VISIBLEREGION_SIZE

The specified visible region size is invalid.

0xC01E033C

STATUS_GRAPHICS_INVALID_STRIDE

The specified stride is invalid.

0xC01E033D

STATUS_GRAPHICS_INVALID_PIXELFORMAT

The specified pixel format is invalid.

0xC01E033E

STATUS_GRAPHICS_INVALID_COLORBASIS

The specified color basis is invalid.

0xC01E033F

STATUS_GRAPHICS_INVALID_PIXELVALUEACCESSMODE

The specified pixel value access mode is invalid.

0xC01E0340

STATUS_GRAPHICS_TARGET_NOT_IN_TOPOLOGY

The specified target is not part of the specified VidPN's topology.

0xC01E0341

STATUS_GRAPHICS_NO_DISPLAY_MODE_MANAGEMENT_SUPPORT

Failed to acquire the display mode management interface.

0xC01E0342

STATUS_GRAPHICS_VIDPN_SOURCE_IN_USE

The specified VidPN source is already owned by a DMM client and cannot be used until that client releases it.

0xC01E0343

STATUS_GRAPHICS_CANT_ACCESS_ACTIVE_VIDPN

The specified VidPN is active and cannot be accessed.

0xC01E0344

STATUS_GRAPHICS_INVALID_PATH_IMPORTANCE_ORDINAL

The specified VidPN's present path importance ordinal is invalid.

0xC01E0345

STATUS_GRAPHICS_INVALID_PATH_CONTENT_GEOMETRY_TRANSFORMATION

The specified VidPN's present path content geometry transformation is invalid.

0xC01E0346

STATUS_GRAPHICS_PATH_CONTENT_GEOMETRY_TRANSFORMATION_NOT_SUPPORTED

The specified content geometry transformation is not supported on the respective VidPN present path.

0xC01E0347

STATUS_GRAPHICS_INVALID_GAMMA_RAMP

The specified gamma ramp is invalid.

0xC01E0348

STATUS_GRAPHICS_GAMMA_RAMP_NOT_SUPPORTED

The specified gamma ramp is not supported on the respective VidPN present path.

0xC01E0349

STATUS_GRAPHICS_MULTISAMPLING_NOT_SUPPORTED

Multisampling is not supported on the respective VidPN present path.

0xC01E034A

STATUS_GRAPHICS_MODE_NOT_IN_MODESET

The specified mode is not in the specified mode set.

0xC01E034D

STATUS_GRAPHICS_INVALID_VIDPN_TOPOLOGY_RECOMMENDATION_REASON

The specified VidPN topology recommendation reason is invalid.

0xC01E034E

STATUS_GRAPHICS_INVALID_PATH_CONTENT_TYPE

The specified VidPN present path content type is invalid.

0xC01E034F

STATUS_GRAPHICS_INVALID_COPYPROTECTION_TYPE

The specified VidPN present path copy protection type is invalid.

0xC01E0350

STATUS_GRAPHICS_UNASSIGNED_MODESET_ALREADY_EXISTS

Only one unassigned mode set can exist at any one time for a particular VidPN source or target.

0xC01E0352

STATUS_GRAPHICS_INVALID_SCANLINE_ORDERING

The specified scan line ordering type is invalid.

0xC01E0353

STATUS_GRAPHICS_TOPOLOGY_CHANGES_NOT_ALLOWED

The topology changes are not allowed for the specified VidPN.

0xC01E0354

STATUS_GRAPHICS_NO_AVAILABLE_IMPORTANCE_ORDINALS

All available importance ordinals are being used in the specified topology.

0xC01E0355

STATUS_GRAPHICS_INCOMPATIBLE_PRIVATE_FORMAT

The specified primary surface has a different private-format attribute than the current primary surface.

0xC01E0356

STATUS_GRAPHICS_INVALID_MODE_PRUNING_ALGORITHM

The specified mode-pruning algorithm is invalid.

0xC01E0357

STATUS_GRAPHICS_INVALID_MONITOR_CAPABILITY_ORIGIN

The specified monitor-capability origin is invalid.

0xC01E0358

STATUS_GRAPHICS_INVALID_MONITOR_FREQUENCYRANGE_CONSTRAINT

The specified monitor-frequency range constraint is invalid.

0xC01E0359

STATUS_GRAPHICS_MAX_NUM_PATHS_REACHED

The maximum supported number of present paths has been reached.

0xC01E035A

STATUS_GRAPHICS_CANCEL_VIDPN_TOPOLOGY_AUGMENTATION

The miniport requested that augmentation be canceled for the specified source of the specified VidPN's topology.

0xC01E035B

STATUS_GRAPHICS_INVALID_CLIENT_TYPE

The specified client type was not recognized.

0xC01E035C

STATUS_GRAPHICS_CLIENTVIDPN_NOT_SET

The client VidPN is not set on this adapter (for example, no user mode-initiated mode changes have taken place on this adapter).

0xC01E0400

STATUS_GRAPHICS_SPECIFIED_CHILD_ALREADY_CONNECTED

The specified display adapter child device already has an external device connected to it.

0xC01E0401

STATUS_GRAPHICS_CHILD_DESCRIPTOR_NOT_SUPPORTED

The display adapter child device does not support reporting a descriptor.

0xC01E0430

STATUS_GRAPHICS_NOT_A_LINKED_ADAPTER

The display adapter is not linked to any other adapters.

0xC01E0431

STATUS_GRAPHICS_LEADLINK_NOT_ENUMERATED

The lead adapter in a linked configuration was not enumerated yet.

0xC01E0432

STATUS_GRAPHICS_CHAINLINKS_NOT_ENUMERATED

Some chain adapters in a linked configuration have not yet been enumerated.

0xC01E0433

STATUS_GRAPHICS_ADAPTER_CHAIN_NOT_READY

The chain of linked adapters is not ready to start because of an unknown failure.

0xC01E0434

STATUS_GRAPHICS_CHAINLINKS_NOT_STARTED

An attempt was made to start a lead link display adapter when the chain links had not yet started.

0xC01E0435

STATUS_GRAPHICS_CHAINLINKS_NOT_POWERED_ON

An attempt was made to turn on a lead link display adapter when the chain links were turned off.

0xC01E0436

STATUS_GRAPHICS_INCONSISTENT_DEVICE_LINK_STATE

The adapter link was found in an inconsistent state. Not all adapters are in an expected PNP/power state.

0xC01E0438

STATUS_GRAPHICS_NOT_POST_DEVICE_DRIVER

The driver trying to start is not the same as the driver for the posted display adapter.

0xC01E043B

STATUS_GRAPHICS_ADAPTER_ACCESS_NOT_EXCLUDED

An operation is being attempted that requires the display adapter to be in a quiescent state.

0xC01E0500

STATUS_GRAPHICS_OPM_NOT_SUPPORTED

The driver does not support OPM.

0xC01E0501

STATUS_GRAPHICS_COPP_NOT_SUPPORTED

The driver does not support COPP.

0xC01E0502

STATUS_GRAPHICS_UAB_NOT_SUPPORTED

The driver does not support UAB.

0xC01E0503

STATUS_GRAPHICS_OPM_INVALID_ENCRYPTED_PARAMETERS

The specified encrypted parameters are invalid.

0xC01E0504

STATUS_GRAPHICS_OPM_PARAMETER_ARRAY_TOO_SMALL

An array passed to a function cannot hold all of the data that the function wants to put in it.

0xC01E0505

STATUS_GRAPHICS_OPM_NO_PROTECTED_OUTPUTS_EXIST

The GDI display device passed to this function does not have any active protected outputs.

0xC01E0506

STATUS_GRAPHICS_PVP_NO_DISPLAY_DEVICE_CORRESPONDS_TO_NAME

The PVP cannot find an actual GDI display device that corresponds to the passed-in GDI display device name.

0xC01E0507

STATUS_GRAPHICS_PVP_DISPLAY_DEVICE_NOT_ATTACHED_TO_DESKTOP

This function failed because the GDI display device passed to it was not attached to the Windows desktop.

0xC01E0508

STATUS_GRAPHICS_PVP_MIRRORING_DEVICES_NOT_SUPPORTED

The PVP does not support mirroring display devices because they do not have any protected outputs.

0xC01E050A

STATUS_GRAPHICS_OPM_INVALID_POINTER

The function failed because an invalid pointer parameter was passed to it. A pointer parameter is invalid if it is null, is not correctly aligned, or it points to an invalid address or a kernel mode address.

0xC01E050B

STATUS_GRAPHICS_OPM_INTERNAL_ERROR

An internal error caused an operation to fail.

0xC01E050C

STATUS_GRAPHICS_OPM_INVALID_HANDLE

The function failed because the caller passed in an invalid OPM user-mode handle.

0xC01E050D

STATUS_GRAPHICS_PVP_NO_MONITORS_CORRESPOND_TO_DISPLAY_DEVICE

This function failed because the GDI device passed to it did not have any monitors associated with it.

0xC01E050E

STATUS_GRAPHICS_PVP_INVALID_CERTIFICATE_LENGTH

A certificate could not be returned because the certificate buffer passed to the function was too small.

0xC01E050F

STATUS_GRAPHICS_OPM_SPANNING_MODE_ENABLED

DxgkDdiOpmCreateProtectedOutput() could not create a protected output because the video present yarget is in spanning mode.

0xC01E0510

STATUS_GRAPHICS_OPM_THEATER_MODE_ENABLED

DxgkDdiOpmCreateProtectedOutput() could not create a protected output because the video present target is in theater mode.

0xC01E0511

STATUS_GRAPHICS_PVP_HFS_FAILED

The function call failed because the display adapter's hardware functionality scan (HFS) failed to validate the graphics hardware.

0xC01E0512

STATUS_GRAPHICS_OPM_INVALID_SRM

The HDCP SRM passed to this function did not comply with section 5 of the HDCP 1.1 specification.

0xC01E0513

STATUS_GRAPHICS_OPM_OUTPUT_DOES_NOT_SUPPORT_HDCP

The protected output cannot enable the HDCP system because it does not support it.

0xC01E0514

STATUS_GRAPHICS_OPM_OUTPUT_DOES_NOT_SUPPORT_ACP

The protected output cannot enable analog copy protection because it does not support it.

0xC01E0515

STATUS_GRAPHICS_OPM_OUTPUT_DOES_NOT_SUPPORT_CGMSA

The protected output cannot enable the CGMS-A protection technology because it does not support it.

0xC01E0516

STATUS_GRAPHICS_OPM_HDCP_SRM_NEVER_SET

DxgkDdiOPMGetInformation() cannot return the version of the SRM being used because the application never successfully passed an SRM to the protected output.

0xC01E0517

STATUS_GRAPHICS_OPM_RESOLUTION_TOO_HIGH

DxgkDdiOPMConfigureProtectedOutput() cannot enable the specified output protection technology because the output's screen resolution is too high.

0xC01E0518

STATUS_GRAPHICS_OPM_ALL_HDCP_HARDWARE_ALREADY_IN_USE

DxgkDdiOPMConfigureProtectedOutput() cannot enable HDCP because other physical outputs are using the display adapter's HDCP hardware.

0xC01E051A

STATUS_GRAPHICS_OPM_PROTECTED_OUTPUT_NO_LONGER_EXISTS

The operating system asynchronously destroyed this OPM-protected output because the operating system state changed. This error typically occurs because the monitor PDO associated with this protected output was removed or stopped, the protected output's session became a nonconsole session, or the protected output's desktop became inactive.

0xC01E051B

STATUS_GRAPHICS_OPM_SESSION_TYPE_CHANGE_IN_PROGRESS

OPM functions cannot be called when a session is changing its type. Three types of sessions currently exist: console, disconnected, and remote (RDP or ICA).

0xC01E051C

STATUS_GRAPHICS_OPM_PROTECTED_OUTPUT_DOES_NOT_HAVE_COPP_SEMANTICS

The DxgkDdiOPMGetCOPPCompatibleInformation, DxgkDdiOPMGetInformation, or DxgkDdiOPMConfigureProtectedOutput function failed. This error is returned only if a protected output has OPM semantics.

DxgkDdiOPMGetCOPPCompatibleInformation always returns this error if a protected output has OPM semantics.

DxgkDdiOPMGetInformation returns this error code if the caller requested COPP-specific information.

DxgkDdiOPMConfigureProtectedOutput returns this error when the caller tries to use a COPP-specific command.

0xC01E051D

STATUS_GRAPHICS_OPM_INVALID_INFORMATION_REQUEST

The DxgkDdiOPMGetInformation and DxgkDdiOPMGetCOPPCompatibleInformation functions return this error code if the passed-in sequence number is not the expected sequence number or the passed-in OMAC value is invalid.

0xC01E051E

STATUS_GRAPHICS_OPM_DRIVER_INTERNAL_ERROR

The function failed because an unexpected error occurred inside a display driver.

0xC01E051F

STATUS_GRAPHICS_OPM_PROTECTED_OUTPUT_DOES_NOT_HAVE_OPM_SEMANTICS

The DxgkDdiOPMGetCOPPCompatibleInformation, DxgkDdiOPMGetInformation, or DxgkDdiOPMConfigureProtectedOutput function failed. This error is returned only if a protected output has COPP semantics.

DxgkDdiOPMGetCOPPCompatibleInformation returns this error code if the caller requested OPM-specific information.

DxgkDdiOPMGetInformation always returns this error if a protected output has COPP semantics.

DxgkDdiOPMConfigureProtectedOutput returns this error when the caller tries to use an OPM-specific command.

0xC01E0520

STATUS_GRAPHICS_OPM_SIGNALING_NOT_SUPPORTED

The DxgkDdiOPMGetCOPPCompatibleInformation and DxgkDdiOPMConfigureProtectedOutput functions return this error if the display driver does not support the DXGKMDT_OPM_GET_ACP_AND_CGMSA_SIGNALING and DXGKMDT_OPM_SET_ACP_AND_CGMSA_SIGNALING GUIDs.

0xC01E0521

STATUS_GRAPHICS_OPM_INVALID_CONFIGURATION_REQUEST

The DxgkDdiOPMConfigureProtectedOutput function returns this error code if the passed-in sequence number is not the expected sequence number or the passed-in OMAC value is invalid.

0xC01E0580

STATUS_GRAPHICS_I2C_NOT_SUPPORTED

The monitor connected to the specified video output does not have an I2C bus.

0xC01E0581

STATUS_GRAPHICS_I2C_DEVICE_DOES_NOT_EXIST

No device on the I2C bus has the specified address.

0xC01E0582

STATUS_GRAPHICS_I2C_ERROR_TRANSMITTING_DATA

An error occurred while transmitting data to the device on the I2C bus.

0xC01E0583

STATUS_GRAPHICS_I2C_ERROR_RECEIVING_DATA

An error occurred while receiving data from the device on the I2C bus.

0xC01E0584

STATUS_GRAPHICS_DDCCI_VCP_NOT_SUPPORTED

The monitor does not support the specified VCP code.

0xC01E0585

STATUS_GRAPHICS_DDCCI_INVALID_DATA

The data received from the monitor is invalid.

0xC01E0586

STATUS_GRAPHICS_DDCCI_MONITOR_RETURNED_INVALID_TIMING_STATUS_BYTE

A function call failed because a monitor returned an invalid timing status byte when the operating system used the DDC/CI get timing report and timing message command to get a timing report from a monitor.

0xC01E0587

STATUS_GRAPHICS_DDCCI_INVALID_CAPABILITIES_STRING

A monitor returned a DDC/CI capabilities string that did not comply with the ACCESS.bus 3.0, DDC/CI 1.1, or MCCS 2 Revision 1 specification.

0xC01E0588

STATUS_GRAPHICS_MCA_INTERNAL_ERROR

An internal error caused an operation to fail.

0xC01E0589

STATUS_GRAPHICS_DDCCI_INVALID_MESSAGE_COMMAND

An operation failed because a DDC/CI message had an invalid value in its command field.

0xC01E058A

STATUS_GRAPHICS_DDCCI_INVALID_MESSAGE_LENGTH

This error occurred because a DDC/CI message had an invalid value in its length field.

0xC01E058B

STATUS_GRAPHICS_DDCCI_INVALID_MESSAGE_CHECKSUM

This error occurred because the value in a DDC/CI message's checksum field did not match the message's computed checksum value. This error implies that the data was corrupted while it was being transmitted from a monitor to a computer.

0xC01E058C

STATUS_GRAPHICS_INVALID_PHYSICAL_MONITOR_HANDLE

This function failed because an invalid monitor handle was passed to it.

0xC01E058D

STATUS_GRAPHICS_MONITOR_NO_LONGER_EXISTS

The operating system asynchronously destroyed the monitor that corresponds to this handle because the operating system's state changed. This error typically occurs because the monitor PDO associated with this handle was removed or stopped, or a display mode change occurred. A display mode change occurs when Windows sends a WM_DISPLAYCHANGE message to applications.

0xC01E05E0

STATUS_GRAPHICS_ONLY_CONSOLE_SESSION_SUPPORTED

This function can be used only if a program is running in the local console session. It cannot be used if a program is running on a remote desktop session or on a terminal server session.

0xC01E05E1

STATUS_GRAPHICS_NO_DISPLAY_DEVICE_CORRESPONDS_TO_NAME

This function cannot find an actual GDI display device that corresponds to the specified GDI display device name.

0xC01E05E2

STATUS_GRAPHICS_DISPLAY_DEVICE_NOT_ATTACHED_TO_DESKTOP

The function failed because the specified GDI display device was not attached to the Windows desktop.

0xC01E05E3

STATUS_GRAPHICS_MIRRORING_DEVICES_NOT_SUPPORTED

This function does not support GDI mirroring display devices because GDI mirroring display devices do not have any physical monitors associated with them.

0xC01E05E4

STATUS_GRAPHICS_INVALID_POINTER

The function failed because an invalid pointer parameter was passed to it. A pointer parameter is invalid if it is null, is not correctly aligned, or points to an invalid address or to a kernel mode address.

0xC01E05E5

STATUS_GRAPHICS_NO_MONITORS_CORRESPOND_TO_DISPLAY_DEVICE

This function failed because the GDI device passed to it did not have a monitor associated with it.

0xC01E05E6

STATUS_GRAPHICS_PARAMETER_ARRAY_TOO_SMALL

An array passed to the function cannot hold all of the data that the function must copy into the array.

0xC01E05E7

STATUS_GRAPHICS_INTERNAL_ERROR

An internal error caused an operation to fail.

0xC01E05E8

STATUS_GRAPHICS_SESSION_TYPE_CHANGE_IN_PROGRESS

The function failed because the current session is changing its type. This function cannot be called when the current session is changing its type. Three types of sessions currently exist: console, disconnected, and remote (RDP or ICA).

0xC0210000

STATUS_FVE_LOCKED_VOLUME

The volume must be unlocked before it can be used.

0xC0210001

STATUS_FVE_NOT_ENCRYPTED

The volume is fully decrypted and no key is available.

0xC0210002

STATUS_FVE_BAD_INFORMATION

The control block for the encrypted volume is not valid.

0xC0210003

STATUS_FVE_TOO_SMALL

Not enough free space remains on the volume to allow encryption.

0xC0210004

STATUS_FVE_FAILED_WRONG_FS

The partition cannot be encrypted because the file system is not supported.

0xC0210005

STATUS_FVE_FAILED_BAD_FS

The file system is inconsistent. Run the Check Disk utility.

0xC0210006

STATUS_FVE_FS_NOT_EXTENDED

The file system does not extend to the end of the volume.

0xC0210007

STATUS_FVE_FS_MOUNTED

This operation cannot be performed while a file system is mounted on the volume.

0xC0210008

STATUS_FVE_NO_LICENSE

BitLocker Drive Encryption is not included with this version of Windows.

0xC0210009

STATUS_FVE_ACTION_NOT_ALLOWED

The requested action was denied by the FVE control engine.

0xC021000A

STATUS_FVE_BAD_DATA

The data supplied is malformed.

0xC021000B

STATUS_FVE_VOLUME_NOT_BOUND

The volume is not bound to the system.

0xC021000C

STATUS_FVE_NOT_DATA_VOLUME

The volume specified is not a data volume.

0xC021000D

STATUS_FVE_CONV_READ_ERROR

A read operation failed while converting the volume.

0xC021000E

STATUS_FVE_CONV_WRITE_ERROR

A write operation failed while converting the volume.

0xC021000F

STATUS_FVE_OVERLAPPED_UPDATE

The control block for the encrypted volume was updated by another thread. Try again.

0xC0210010

STATUS_FVE_FAILED_SECTOR_SIZE

The volume encryption algorithm cannot be used on this sector size.

0xC0210011

STATUS_FVE_FAILED_AUTHENTICATION

BitLocker recovery authentication failed.

0xC0210012

STATUS_FVE_NOT_OS_VOLUME

The volume specified is not the boot operating system volume.

0xC0210013

STATUS_FVE_KEYFILE_NOT_FOUND

The BitLocker startup key or recovery password could not be read from external media.

0xC0210014

STATUS_FVE_KEYFILE_INVALID

The BitLocker startup key or recovery password file is corrupt or invalid.

0xC0210015

STATUS_FVE_KEYFILE_NO_VMK

The BitLocker encryption key could not be obtained from the startup key or the recovery password.

0xC0210016

STATUS_FVE_TPM_DISABLED

The TPM is disabled.

0xC0210017

STATUS_FVE_TPM_SRK_AUTH_NOT_ZERO

The authorization data for the SRK of the TPM is not zero.

0xC0210018

STATUS_FVE_TPM_INVALID_PCR

The system boot information changed or the TPM locked out access to BitLocker encryption keys until the computer is restarted.

0xC0210019

STATUS_FVE_TPM_NO_VMK

The BitLocker encryption key could not be obtained from the TPM.

0xC021001A

STATUS_FVE_PIN_INVALID

The BitLocker encryption key could not be obtained from the TPM and PIN.

0xC021001B

STATUS_FVE_AUTH_INVALID_APPLICATION

A boot application hash does not match the hash computed when BitLocker was turned on.

0xC021001C

STATUS_FVE_AUTH_INVALID_CONFIG

The Boot Configuration Data (BCD) settings are not supported or have changed because BitLocker was enabled.

0xC021001D

STATUS_FVE_DEBUGGER_ENABLED

Boot debugging is enabled. Run Windows Boot Configuration Data Store Editor (bcdedit.exe) to turn it off.

0xC021001E

STATUS_FVE_DRY_RUN_FAILED

The BitLocker encryption key could not be obtained.

0xC021001F

STATUS_FVE_BAD_METADATA_POINTER

The metadata disk region pointer is incorrect.

0xC0210020

STATUS_FVE_OLD_METADATA_COPY

The backup copy of the metadata is out of date.

0xC0210021

STATUS_FVE_REBOOT_REQUIRED

No action was taken because a system restart is required.

0xC0210022

STATUS_FVE_RAW_ACCESS

No action was taken because BitLocker Drive Encryption is in RAW access mode.

0xC0210023

STATUS_FVE_RAW_BLOCKED

BitLocker Drive Encryption cannot enter RAW access mode for this volume.

0xC0210026

STATUS_FVE_NO_FEATURE_LICENSE

This feature of BitLocker Drive Encryption is not included with this version of Windows.

0xC0210027

STATUS_FVE_POLICY_USER_DISABLE_RDV_NOT_ALLOWED

Group policy does not permit turning off BitLocker Drive Encryption on roaming data volumes.

0xC0210028

STATUS_FVE_CONV_RECOVERY_FAILED

Bitlocker Drive Encryption failed to recover from aborted conversion. This could be due to either all conversion logs being corrupted or the media being write-protected.

0xC0210029

STATUS_FVE_VIRTUALIZED_SPACE_TOO_BIG

The requested virtualization size is too big.

0xC0210030

STATUS_FVE_VOLUME_TOO_SMALL

The drive is too small to be protected using BitLocker Drive Encryption.

0xC0220001

STATUS_FWP_CALLOUT_NOT_FOUND

The callout does not exist.

0xC0220002

STATUS_FWP_CONDITION_NOT_FOUND

The filter condition does not exist.

0xC0220003

STATUS_FWP_FILTER_NOT_FOUND

The filter does not exist.

0xC0220004

STATUS_FWP_LAYER_NOT_FOUND

The layer does not exist.

0xC0220005

STATUS_FWP_PROVIDER_NOT_FOUND

The provider does not exist.

0xC0220006

STATUS_FWP_PROVIDER_CONTEXT_NOT_FOUND

The provider context does not exist.

0xC0220007

STATUS_FWP_SUBLAYER_NOT_FOUND

The sublayer does not exist.

0xC0220008

STATUS_FWP_NOT_FOUND

The object does not exist.

0xC0220009

STATUS_FWP_ALREADY_EXISTS

An object with that GUID or LUID already exists.

0xC022000A

STATUS_FWP_IN_USE

The object is referenced by other objects and cannot be deleted.

0xC022000B

STATUS_FWP_DYNAMIC_SESSION_IN_PROGRESS

The call is not allowed from within a dynamic session.

0xC022000C

STATUS_FWP_WRONG_SESSION

The call was made from the wrong session and cannot be completed.

0xC022000D

STATUS_FWP_NO_TXN_IN_PROGRESS

The call must be made from within an explicit transaction.

0xC022000E

STATUS_FWP_TXN_IN_PROGRESS

The call is not allowed from within an explicit transaction.

0xC022000F

STATUS_FWP_TXN_ABORTED

The explicit transaction has been forcibly canceled.

0xC0220010

STATUS_FWP_SESSION_ABORTED

The session has been canceled.

0xC0220011

STATUS_FWP_INCOMPATIBLE_TXN

The call is not allowed from within a read-only transaction.

0xC0220012

STATUS_FWP_TIMEOUT

The call timed out while waiting to acquire the transaction lock.

0xC0220013

STATUS_FWP_NET_EVENTS_DISABLED

The collection of network diagnostic events is disabled.

0xC0220014

STATUS_FWP_INCOMPATIBLE_LAYER

The operation is not supported by the specified layer.

0xC0220015

STATUS_FWP_KM_CLIENTS_ONLY

The call is allowed for kernel-mode callers only.

0xC0220016

STATUS_FWP_LIFETIME_MISMATCH

The call tried to associate two objects with incompatible lifetimes.

0xC0220017

STATUS_FWP_BUILTIN_OBJECT

The object is built-in and cannot be deleted.

0xC0220018

STATUS_FWP_TOO_MANY_BOOTTIME_FILTERS

The maximum number of boot-time filters has been reached.

0xC0220018

STATUS_FWP_TOO_MANY_CALLOUTS

The maximum number of callouts has been reached.

0xC0220019

STATUS_FWP_NOTIFICATION_DROPPED

A notification could not be delivered because a message queue has reached maximum capacity.

0xC022001A

STATUS_FWP_TRAFFIC_MISMATCH

The traffic parameters do not match those for the security association context.

0xC022001B

STATUS_FWP_INCOMPATIBLE_SA_STATE

The call is not allowed for the current security association state.

0xC022001C

STATUS_FWP_NULL_POINTER

A required pointer is null.

0xC022001D

STATUS_FWP_INVALID_ENUMERATOR

An enumerator is not valid.

0xC022001E

STATUS_FWP_INVALID_FLAGS

The flags field contains an invalid value.

0xC022001F

STATUS_FWP_INVALID_NET_MASK

A network mask is not valid.

0xC0220020

STATUS_FWP_INVALID_RANGE

An FWP_RANGE is not valid.

0xC0220021

STATUS_FWP_INVALID_INTERVAL

The time interval is not valid.

0xC0220022

STATUS_FWP_ZERO_LENGTH_ARRAY

An array that must contain at least one element has a zero length.

0xC0220023

STATUS_FWP_NULL_DISPLAY_NAME

The displayData.name field cannot be null.

0xC0220024

STATUS_FWP_INVALID_ACTION_TYPE

The action type is not one of the allowed action types for a filter.

0xC0220025

STATUS_FWP_INVALID_WEIGHT

The filter weight is not valid.

0xC0220026

STATUS_FWP_MATCH_TYPE_MISMATCH

A filter condition contains a match type that is not compatible with the operands.

0xC0220027

STATUS_FWP_TYPE_MISMATCH

An FWP_VALUE or FWPM_CONDITION_VALUE is of the wrong type.

0xC0220028

STATUS_FWP_OUT_OF_BOUNDS

An integer value is outside the allowed range.

0xC0220029

STATUS_FWP_RESERVED

A reserved field is nonzero.

0xC022002A

STATUS_FWP_DUPLICATE_CONDITION

A filter cannot contain multiple conditions operating on a single field.

0xC022002B

STATUS_FWP_DUPLICATE_KEYMOD

A policy cannot contain the same keying module more than once.

0xC022002C

STATUS_FWP_ACTION_INCOMPATIBLE_WITH_LAYER

The action type is not compatible with the layer.

0xC022002D

STATUS_FWP_ACTION_INCOMPATIBLE_WITH_SUBLAYER

The action type is not compatible with the sublayer.

0xC022002E

STATUS_FWP_CONTEXT_INCOMPATIBLE_WITH_LAYER

The raw context or the provider context is not compatible with the layer.

0xC022002F

STATUS_FWP_CONTEXT_INCOMPATIBLE_WITH_CALLOUT

The raw context or the provider context is not compatible with the callout.

0xC0220030

STATUS_FWP_INCOMPATIBLE_AUTH_METHOD

The authentication method is not compatible with the policy type.

0xC0220031

STATUS_FWP_INCOMPATIBLE_DH_GROUP

The Diffie-Hellman group is not compatible with the policy type.

0xC0220032

STATUS_FWP_EM_NOT_SUPPORTED

An IKE policy cannot contain an Extended Mode policy.

0xC0220033

STATUS_FWP_NEVER_MATCH

The enumeration template or subscription will never match any objects.

0xC0220034

STATUS_FWP_PROVIDER_CONTEXT_MISMATCH

The provider context is of the wrong type.

0xC0220035

STATUS_FWP_INVALID_PARAMETER

The parameter is incorrect.

0xC0220036

STATUS_FWP_TOO_MANY_SUBLAYERS

The maximum number of sublayers has been reached.

0xC0220037

STATUS_FWP_CALLOUT_NOTIFICATION_FAILED

The notification function for a callout returned an error.

0xC0220038

STATUS_FWP_INCOMPATIBLE_AUTH_CONFIG

The IPsec authentication configuration is not compatible with the authentication type.

0xC0220039

STATUS_FWP_INCOMPATIBLE_CIPHER_CONFIG

The IPsec cipher configuration is not compatible with the cipher type.

0xC022003C

STATUS_FWP_DUPLICATE_AUTH_METHOD

A policy cannot contain the same auth method more than once.

0xC0220100

STATUS_FWP_TCPIP_NOT_READY

The TCP/IP stack is not ready.

0xC0220101

STATUS_FWP_INJECT_HANDLE_CLOSING

The injection handle is being closed by another thread.

0xC0220102

STATUS_FWP_INJECT_HANDLE_STALE

The injection handle is stale.

0xC0220103

STATUS_FWP_CANNOT_PEND

The classify cannot be pended.

0xC0230002

STATUS_NDIS_CLOSING

The binding to the network interface is being closed.

0xC0230004

STATUS_NDIS_BAD_VERSION

An invalid version was specified.

0xC0230005

STATUS_NDIS_BAD_CHARACTERISTICS

An invalid characteristics table was used.

0xC0230006

STATUS_NDIS_ADAPTER_NOT_FOUND

Failed to find the network interface or the network interface is not ready.

0xC0230007

STATUS_NDIS_OPEN_FAILED

Failed to open the network interface.

0xC0230008

STATUS_NDIS_DEVICE_FAILED

The network interface has encountered an internal unrecoverable failure.

0xC0230009

STATUS_NDIS_MULTICAST_FULL

The multicast list on the network interface is full.

0xC023000A

STATUS_NDIS_MULTICAST_EXISTS

An attempt was made to add a duplicate multicast address to the list.

0xC023000B

STATUS_NDIS_MULTICAST_NOT_FOUND

At attempt was made to remove a multicast address that was never added.

0xC023000C

STATUS_NDIS_REQUEST_ABORTED

The network interface aborted the request.

0xC023000D

STATUS_NDIS_RESET_IN_PROGRESS

The network interface cannot process the request because it is being reset.

0xC023000F

STATUS_NDIS_INVALID_PACKET

An attempt was made to send an invalid packet on a network interface.

0xC0230010

STATUS_NDIS_INVALID_DEVICE_REQUEST

The specified request is not a valid operation for the target device.

0xC0230011

STATUS_NDIS_ADAPTER_NOT_READY

The network interface is not ready to complete this operation.

0xC0230014

STATUS_NDIS_INVALID_LENGTH

The length of the buffer submitted for this operation is not valid.

0xC0230015

STATUS_NDIS_INVALID_DATA

The data used for this operation is not valid.

0xC0230016

STATUS_NDIS_BUFFER_TOO_SHORT

The length of the submitted buffer for this operation is too small.

0xC0230017

STATUS_NDIS_INVALID_OID

The network interface does not support this object identifier.

0xC0230018

STATUS_NDIS_ADAPTER_REMOVED

The network interface has been removed.

0xC0230019

STATUS_NDIS_UNSUPPORTED_MEDIA

The network interface does not support this media type.

0xC023001A

STATUS_NDIS_GROUP_ADDRESS_IN_USE

An attempt was made to remove a token ring group address that is in use by other components.

0xC023001B

STATUS_NDIS_FILE_NOT_FOUND

An attempt was made to map a file that cannot be found.

0xC023001C

STATUS_NDIS_ERROR_READING_FILE

An error occurred while NDIS tried to map the file.

0xC023001D

STATUS_NDIS_ALREADY_MAPPED

An attempt was made to map a file that is already mapped.

0xC023001E

STATUS_NDIS_RESOURCE_CONFLICT

An attempt to allocate a hardware resource failed because the resource is used by another component.

0xC023001F

STATUS_NDIS_MEDIA_DISCONNECTED

The I/O operation failed because the network media is disconnected or the wireless access point is out of range.

0xC0230022

STATUS_NDIS_INVALID_ADDRESS

The network address used in the request is invalid.

0xC023002A

STATUS_NDIS_PAUSED

The offload operation on the network interface has been paused.

0xC023002B

STATUS_NDIS_INTERFACE_NOT_FOUND

The network interface was not found.

0xC023002C

STATUS_NDIS_UNSUPPORTED_REVISION

The revision number specified in the structure is not supported.

0xC023002D

STATUS_NDIS_INVALID_PORT

The specified port does not exist on this network interface.

0xC023002E

STATUS_NDIS_INVALID_PORT_STATE

The current state of the specified port on this network interface does not support the requested operation.

0xC023002F

STATUS_NDIS_LOW_POWER_STATE

The miniport adapter is in a lower power state.

0xC02300BB

STATUS_NDIS_NOT_SUPPORTED

The network interface does not support this request.

0xC023100F

STATUS_NDIS_OFFLOAD_POLICY

The TCP connection is not offloadable because of a local policy setting.

0xC0231012

STATUS_NDIS_OFFLOAD_CONNECTION_REJECTED

The TCP connection is not offloadable by the Chimney offload target.

0xC0231013

STATUS_NDIS_OFFLOAD_PATH_REJECTED

The IP Path object is not in an offloadable state.

0xC0232000

STATUS_NDIS_DOT11_AUTO_CONFIG_ENABLED

The wireless LAN interface is in auto-configuration mode and does not support the requested parameter change operation.

0xC0232001

STATUS_NDIS_DOT11_MEDIA_IN_USE

The wireless LAN interface is busy and cannot perform the requested operation.

0xC0232002

STATUS_NDIS_DOT11_POWER_STATE_INVALID

The wireless LAN interface is power down and does not support the requested operation.

0xC0232003

STATUS_NDIS_PM_WOL_PATTERN_LIST_FULL

The list of wake on LAN patterns is full.

0xC0232004

STATUS_NDIS_PM_PROTOCOL_OFFLOAD_LIST_FULL

The list of low power protocol offloads is full.

0xC0360001

STATUS_IPSEC_BAD_SPI

The SPI in the packet does not match a valid IPsec SA.

0xC0360002

STATUS_IPSEC_SA_LIFETIME_EXPIRED

The packet was received on an IPsec SA whose lifetime has expired.

0xC0360003

STATUS_IPSEC_WRONG_SA

The packet was received on an IPsec SA that does not match the packet characteristics.

0xC0360004

STATUS_IPSEC_REPLAY_CHECK_FAILED

The packet sequence number replay check failed.

0xC0360005

STATUS_IPSEC_INVALID_PACKET

The IPsec header and/or trailer in the packet is invalid.

0xC0360006

STATUS_IPSEC_INTEGRITY_CHECK_FAILED

The IPsec integrity check failed.

0xC0360007

STATUS_IPSEC_CLEAR_TEXT_DROP

IPsec dropped a clear text packet.

0xC0360008

STATUS_IPSEC_AUTH_FIREWALL_DROP

IPsec dropped an incoming ESP packet in authenticated firewall mode.  This drop is benign.

0xC0360009

STATUS_IPSEC_THROTTLE_DROP

IPsec dropped a packet due to DOS throttle.

0xC0368000

STATUS_IPSEC_DOSP_BLOCK

IPsec Dos Protection matched an explicit block rule.

0xC0368001

STATUS_IPSEC_DOSP_RECEIVED_MULTICAST

IPsec Dos Protection received an IPsec specific multicast packet which is not allowed.

0xC0368002

STATUS_IPSEC_DOSP_INVALID_PACKET

IPsec Dos Protection received an incorrectly formatted packet.

0xC0368003

STATUS_IPSEC_DOSP_STATE_LOOKUP_FAILED

IPsec Dos Protection failed to lookup state.

0xC0368004

STATUS_IPSEC_DOSP_MAX_ENTRIES

IPsec Dos Protection failed to create state because there are already maximum number of entries allowed by policy.

0xC0368005

STATUS_IPSEC_DOSP_KEYMOD_NOT_ALLOWED

IPsec Dos Protection received an IPsec negotiation packet for a keying module which is not allowed by policy.

0xC0368006

STATUS_IPSEC_DOSP_MAX_PER_IP_RATELIMIT_QUEUES

IPsec Dos Protection failed to create per internal IP ratelimit queue because there is already maximum number of queues allowed by policy.

0xC038005B

STATUS_VOLMGR_MIRROR_NOT_SUPPORTED

The system does not support mirrored volumes.

0xC038005C

STATUS_VOLMGR_RAID5_NOT_SUPPORTED

The system does not support RAID-5 volumes.

0xC03A0014

STATUS_VIRTDISK_PROVIDER_NOT_FOUND

A virtual disk support provider for the specified file was not found.

0xC03A0015

STATUS_VIRTDISK_NOT_VIRTUAL_DISK

The specified disk is not a virtual disk.

0xC03A0016

STATUS_VHD_PARENT_VHD_ACCESS_DENIED

The chain of virtual hard disks is inaccessible. The process has not been granted access rights to the parent virtual hard disk for the differencing disk.

0xC03A0017

STATUS_VHD_CHILD_PARENT_SIZE_MISMATCH

The chain of virtual hard disks is corrupted. There is a mismatch in the virtual sizes of the parent virtual hard disk and differencing disk.

0xC03A0018

STATUS_VHD_DIFFERENCING_CHAIN_CYCLE_DETECTED

The chain of virtual hard disks is corrupted. A differencing disk is indicated in its own parent chain.

0xC03A0019

STATUS_VHD_DIFFERENCING_CHAIN_ERROR_IN_PARENT

The chain of virtual hard disks is inaccessible. There was an error opening a virtual hard disk further up the chain.

msdn.microsoft.com

SMB Error Classes and Codes

This section provides an overview of status codes that can be returned by the SMB commands listed in this document, including mappings between the NTSTATUS codes used in the NT LAN Manager dialect, the SMBSTATUS class/code pairs used in earlier SMB dialects, and common POSIX equivalents. The POSIX error code mappings are based upon those used in the Xenix server implementation. This is not an exhaustive listing and MUST NOT be considered normative.

Each command and subcommand description also includes a list of status codes that are returned by CIFS-compliant servers. Individual implementations can return status codes from their underlying operating systems; it is up to the implementer to decide how to interpret those status codes.

The listing below is organized by SMBSTATUS Error Class. It shows SMBSTATUS Error Code values and a general description, as well as mappings from NTSTATUS values ([MS-ERREF] section 2.3.1) and POSIX-style error codes where possible. Note that multiple NTSTATUS values can map to a single SMBSTATUS value.

Error code

NTSTATUS values

POSIX equivalent

Description

ERRbadfunc

0x0001

STATUS_NOT_IMPLEMENTED

0xC0000002

STATUS_INVALID_DEVICE_REQUEST

0xC0000010

STATUS_ILLEGAL_FUNCTION

0xC00000AF

EINVAL

Invalid Function.

ERRbadfile

0x0002

STATUS_NO_SUCH_FILE

0xC000000F

STATUS_NO_SUCH_DEVICE

0xC000000E

STATUS_OBJECT_NAME_NOT_FOUND

0xC0000034

ENOENT

File not found.

ERRbadpath

0x0003

STATUS_OBJECT_PATH_INVALID

0xC0000039

STATUS_OBJECT_PATH_NOT_FOUND

0xC000003A

STATUS_OBJECT_PATH_SYNTAX_BAD

0xC000003B

STATUS_DFS_EXIT_PATH_FOUND

0xC000009B

STATUS_REDIRECTOR_NOT_STARTED

0xC00000FB

ENOENT

A component in the path prefix is not a directory.

ERRnofids

0x0004

STATUS_TOO_MANY_OPENED_FILES

0xC000011F

EMFILE

Too many open files. No FIDs are available.

ERRnoaccess

0x0005

STATUS_ACCESS_DENIED

0xC0000022

STATUS_INVALID_LOCK_SEQUENCE

0xC000001E

STATUS_INVALID_VIEW_SIZE

0xC000001F

STATUS_ALREADY_COMMITTED

0xC0000021

STATUS_PORT_CONNECTION_REFUSED

0xC0000041

STATUS_THREAD_IS_TERMINATING

0xC000004B

STATUS_DELETE_PENDING

0xC0000056

STATUS_PRIVILEGE_NOT_HELD

0xC0000061

STATUS_LOGON_FAILURE

0xC000006D

STATUS_FILE_IS_A_DIRECTORY

0xC00000BA

STATUS_FILE_RENAMED

0xC00000D5

STATUS_PROCESS_IS_TERMINATING

0xC000010A

STATUS_DIRECTORY_NOT_EMPTY

0xC0000101

STATUS_CANNOT_DELETE

0xC0000121

STATUS_FILE_DELETED

0xC0000123

EPERM

Access denied.

ERRbadfid

0x0006

STATUS_SMB_BAD_FID

0x00060001

STATUS_INVALID_HANDLE

0xC0000008

STATUS_OBJECT_TYPE_MISMATCH

0xC0000024

STATUS_PORT_DISCONNECTED

0xC0000037

STATUS_INVALID_PORT_HANDLE

0xC0000042

STATUS_FILE_CLOSED

0xC0000128

STATUS_HANDLE_NOT_CLOSABLE

0xC0000235

EBADF

Invalid FID.

ERRbadmcb

0x0007

Memory Control Blocks were destroyed.

ERRnomem

0x0008

STATUS_SECTION_TOO_BIG

0xC0000040

STATUS_TOO_MANY_PAGING_FILES

0xC0000097

STATUS_INSUFF_SERVER_RESOURCES

0xC0000205

ENOMEM

Insufficient server memory to perform the requested operation.

ERRbadmem

0x0009

EFAULT

The server performed an invalid memory access (invalid address).

ERRbadenv

0x000A

Invalid environment.

ERRbadformat

0x000B

Invalid format.

ERRbadaccess

0x000C

STATUS_OS2_INVALID_ACCESS

0x000C0001

STATUS_ACCESS_DENIED

0xC00000CA

Invalid open mode.

ERRbaddata

0x000D

STATUS_DATA_ERROR

0xC000009C

E2BIG

Bad data. (May be generated by IOCTL calls on the server.)

ERRbaddrive

0x000F

ENXIO

Invalid drive specified.

ERRremcd

0x0010

STATUS_DIRECTORY_NOT_EMPTY

0xC0000101

Remove of directory failed because it was not empty.

ERRdiffdevice

0x0011

STATUS_NOT_SAME_DEVICE

0xC00000D4

EXDEV

A file system operation (such as a rename) across two devices was attempted.

ERRnofiles

0x0012

STATUS_NO_MORE_FILES

0x80000006

No (more) files found following a file search command.

ERRgeneral

0x001F

STATUS_UNSUCCESSFUL

0xC0000001

General error.

ERRbadshare

0x0020

STATUS_SHARING_VIOLATION

0xC0000043

ETXTBSY

Sharing violation. A requested open mode conflicts with the sharing mode of an existing file handle.

ERRlock

0x0021

STATUS_FILE_LOCK_CONFLICT

0xC0000054

STATUS_LOCK_NOT_GRANTED

0xC0000055

EDEADLOCK

A lock request specified an invalid locking mode, or conflicted with an existing file lock.

ERReof

0x0026

STATUS_END_OF_FILE

0xC0000011

EEOF

Attempted to read beyond the end of the file.

ERRunsup

0x0032

STATUS_NOT_SUPPORTED

0XC00000BB

This command is not supported by the server.

ERRfilexists

0x0050

STATUS_OBJECT_NAME_COLLISION

0xC0000035

EEXIST

An attempt to create a file or directory failed because an object with the same pathname already exists.

ERRinvalidparam

0x0057

STATUS_INVALID_PARAMETER

0xC000000D

A parameter supplied with the message is invalid.

ERRunknownlevel

0x007C

STATUS_OS2_INVALID_LEVEL

0x007C0001

Invalid information level.

ERRinvalidseek

0x0083

STATUS_OS2_NEGATIVE_SEEK

0x00830001

An attempt was made to seek to a negative absolute offset within a file.

ERROR_NOT_LOCKED

0x009E

STATUS_RANGE_NOT_LOCKED

0xC000007E

The byte range specified in an unlock request was not locked.

ERROR_NO_MORE_SEARCH_HANDLES

0x0071

STATUS_OS2_NO_MORE_SIDS

0x00710001

Maximum number of searches has been exhausted.

ERROR_CANCEL_VIOLATION

0x00AD

STATUS_OS2_CANCEL_VIOLATION

0x00AD0001

No lock request was outstanding for the supplied cancel region.

ERROR_ATOMIC_LOCKS_NOT_SUPPORTED

0x00AE

STATUS_OS2_ATOMIC_LOCKS_NOT_SUPPORTED

0x00AE0001

The file system does not support atomic changes to the lock type.

ERRbadpipe

0x00E6

STATUS_INVALID_INFO_CLASS

0xC0000003

STATUS_INVALID_PIPE_STATE

0xC00000AD

STATUS_INVALID_READ_MODE

0xC00000B4

Invalid named pipe.

ERROR_CANNOT_COPY

0x010A

STATUS_OS2_CANNOT_COPY

0x010A0001

The copy functions cannot be used.

ERRpipebusy

0x00E7

STATUS_INSTANCE_NOT_AVAILABLE

0xC00000AB

STATUS_PIPE_NOT_AVAILABLE

0xC00000AC

STATUS_PIPE_BUSY

0xC00000AE

All instances of the designated named pipe are busy.

ERRpipeclosing

0x00E8

STATUS_PIPE_CLOSING

0xC00000B1

STATUS_PIPE_EMPTY

0xC00000D9

The designated named pipe is in the process of being closed.

ERRnotconnected

0x00E9

STATUS_PIPE_DISCONNECTED

0xC00000B0

The designated named pipe exists, but there is no server process listening on the server side.

ERRmoredata

0x00EA

STATUS_BUFFER_OVERFLOW

0x80000005

STATUS_MORE_PROCESSING_REQUIRED

0xC0000016

There is more data available to read on the designated named pipe.

ERRbadealist

0x00FF

Inconsistent extended attribute list.

ERROR_EAS_

DIDNT_FIT

0x0113

STATUS_EA_TOO_LARGE

0xC0000050

STATUS_OS2_EAS_DIDNT_FIT

0x01130001

Either there are no extended attributes, or the available extended attributes did not fit into the response.

ERROR_EAS_

NOT_SUPPORTED

0x011A

STATUS_EAS_NOT_SUPPORTED

0xC000004F

The server file system does not support Extended Attributes.

ERROR_EA_ACCESS_DENIED

0x03E2

STATUS_OS2_EA_ACCESS_DENIED

0x03E20001

Access to the extended attribute was denied.

ERR_NOTIFY_ENUM_DIR

0x03FE

STATUS_NOTIFY_ENUM_DIR

0x0000010C

More changes have occurred within the directory than will fit within the specified Change Notify response buffer.

Error code

NTSTATUS values

POSIX equivalent

Description

ERRerror

0x0001

STATUS_INVALID_SMB

0x00010002

Unspecified server error.<23>

ERRbadpw

0x0002

STATUS_WRONG_PASSWORD

0xC000006A

Invalid password.

ERRbadpath

0x0003

STATUS_PATH_NOT_COVERED

0xC0000257

DFS pathname not on local server.

ERRaccess

0x0004

STATUS_NETWORK_ACCESS_DENIED

0xC00000CA

EACCES

Access denied. The specified UID does not have permission to execute the requested command within the current context (TID).

ERRinvtid

0x0005

STATUS_NETWORK_NAME_DELETED

0xC00000C9

STATUS_SMB_BAD_TID

0x00050002

The TID specified in the command was invalid.

Earlier documentation, with the exception of [SNIA], refers to this error code as ERRinvnid (Invalid Network Path Identifier). [SNIA] uses both names.<24>

ERRinvnetname

0x0006

STATUS_BAD_NETWORK_NAME

0xC00000CC

Invalid server name in Tree Connect.

ERRinvdevice

0x0007

STATUS_BAD_DEVICE_TYPE

0xC00000CB

A printer request was made to a non-printer device or, conversely, a non-printer request was made to a printer device.

ERRinvsess

0x0010

Invalid Connection ID (CID). This error code is only defined when the Direct IPX connectionless transport is in use.

ERRworking

0x0011

A command with matching MID or SequenceNumber is currently being processed. This error code is defined only when the Direct IPX connectionless transport is in use.

ERRnotme

0x0012

Incorrect NetBIOS Called Name when starting an SMB session over Direct IPX. This error code is only defined when the Direct IPX connectionless transport is in use.

ERRbadcmd

0x0016

STATUS_SMB_BAD_COMMAND

0x00160002

An unknown SMB command code was received by the server.

ERRqfull

0x0031

STATUS_PRINT_QUEUE_FULL

0xC00000C6

Print queue is full - too many queued items.

ERRqtoobig

0x0032

STATUS_NO_SPOOL_SPACE

0xC00000C7

Print queue is full - no space for queued item, or queued item too big.

ERRqeof

0x0033

End Of File on print queue dump.

ERRinvpfid

0x0034

STATUS_PRINT_CANCELLED

0xC00000C8

Invalid FID for print file.

ERRsmbcmd

0x0040

STATUS_NOT_IMPLEMENTED

0xC0000002

Unrecognized SMB command code.

ERRsrverror

0x0041

STATUS_UNEXPECTED_NETWORK_ERROR

0xC00000C4

Internal server error.

ERRfilespecs

0x0043

The FID and pathname contain incompatible values.

ERRbadpermits

0x0045

STATUS_NETWORK_ACCESS_DENIED

0xC00000CA

An invalid combination of access permissions for a file or directory was presented. The server cannot set the requested attributes.

ERRsetattrmode

0x0047

The attribute mode presented in a set mode request was invalid.

ERRtimeout

0x0058

STATUS_UNEXPECTED_NETWORK_ERROR

0xC00000C4

STATUS_IO_TIMEOUT

0xC00000B5

Operation timed out.

ERRnoresource

0x0059

STATUS_REQUEST_NOT_ACCEPTED

0xC00000D0

No resources currently available for this SMB request.

ERRtoomanyuids

0x005A

STATUS_TOO_MANY_SESSIONS

0xC00000CE

Too many UIDs active for this SMB connection.

ERRbaduid

0x005B

STATUS_SMB_BAD_UID

0x005B0002

The UID specified is not known as a valid ID on this server session.

ERRnotconnected

0x00E9

STATUS_PIPE_DISCONNECTED

0xC00000B0

EPIPE

Write to a named pipe with no reader.

ERRusempx

0x00FA

STATUS_SMB_USE_MPX

0x00FA0002

Temporarily unable to support RAW mode transfers. Use MPX mode.

ERRusestd

0x00FB

STATUS_SMB_USE_STANDARD

0x00FB0002

Temporarily unable to support RAW or MPX mode transfers. Use standard read/write.

ERRcontmpx

0x00FC

STATUS_SMB_CONTINUE_MPX

0x00FC0002

Continue in MPX mode.

This error code is reserved for future use.

ERRaccountExpired

0x08BF

STATUS_ACCOUNT_DISABLED

0xC0000072

STATUS_ACCOUNT_EXPIRED

0xC0000193

User account on the target machine is disabled or has expired.

ERRbadClient

0x08C0

STATUS_INVALID_WORKSTATION

0xC0000070

The client does not have permission to access this server.

ERRbadLogonTime

0x08C1

STATUS_INVALID_LOGON_HOURS

0xC000006F

Access to the server is not permitted at this time.

ERRpasswordExpired

0x08C2

STATUS_PASSWORD_EXPIRED

0xC0000071

STATUS_PASSWORD_MUST_CHANGE

0xC0000224

The user's password has expired.

ERRnosupport

0xFFFF

STATUS_SMB_NO_SUPPORT

0XFFFF0002

Function not supported by the server.

Error code

NTSTATUS values

POSIX equivalent

Description

ERRnowrite

0x0013

STATUS_MEDIA_WRITE_PROTECTED

0xC00000A2

EROFS

Attempt to modify a read-only file system.

ERRbadunit

0x0014

ENODEV

Unknown unit.

ERRnotready

0x0015

STATUS_NO_MEDIA_IN_DEVICE

0xC0000013

EUCLEAN

Drive not ready.

ERRbadcmd

0x0016

STATUS_INVALID_DEVICE_STATE

0xC0000184

Unknown command.

ERRdata

0x0017

STATUS_DATA_ERROR

0xC000003E

STATUS_CRC_ERROR

0xC000003F

EIO

Data error (incorrect CRC).

ERRbadreq

0x0018

STATUS_DATA_ERROR

0xC000003E

ERANGE

Bad request structure length.

ERRseek

0x0019

Seek error.

ERRbadmedia

0x001A

STATUS_DISK_CORRUPT_ERROR

0xC0000032

Unknown media type.

ERRbadsector

0x001B

STATUS_NONEXISTENT_SECTOR

0xC0000015

Sector not found.

ERRnopaper

0x001C

STATUS_DEVICE_PAPER_EMPTY

0x8000000E

Printer out of paper.

ERRwrite

0x001D

Write fault.

ERRread

0x001E

Read fault.

ERRgeneral

0x001F

General hardware failure.

ERRbadshare

0x0020

STATUS_SHARING_VIOLATION

0xC0000043

ETXTBSY

An attempted open operation conflicts with an existing open.

ERRlock

0x0021

STATUS_FILE_LOCK_CONFLICT

0xC0000054

EDEADLOCK

A lock request specified an invalid locking mode, or conflicted with an existing file lock.

ERRwrongdisk

0x0022

STATUS_WRONG_VOLUME

0xC0000012

The wrong disk was found in a drive.

ERRFCBUnavail

0x0023

No server-side File Control Blocks are available to process the request.

ERRsharebufexc

0x0024

A sharing buffer has been exceeded.

ERRdiskfull

0x0027

STATUS_DISK_FULL

0xC000007F

ENOSPC

No space on file system.

The ERRCMD error class is used to indicate that the server received a command that was not in the SMB format. No error codes are defined for use with the ERRCMD (0XFF) class.<25>

msdn.microsoft.com

Network Error Codes

Network error codes

In the case of network errors (e.g. a connection to a proxy server fails) Proxifier outputs error code numbers. These are the standard Winsock error codes. This section contains the codes of network errors and their description.

 

WSAEACCES (10013) Permission denied. An attempt was made to access a socket in a way forbidden by its access permissions. An example is using a broadcast address for sendto without broadcast permission being set using setsockopt(SO_BROADCAST). Another possible reason for the WSAEACCES error is that when the bind function is called (on Windows NT 4 SP4 or later), another application, service, or kernel mode driver is bound to the same address with exclusive access. Such exclusive access is a new feature of Windows NT 4 SP4 and later, and is implemented by using the SO_EXCLUSIVEADDRUSE option.

 

WSAEADDRINUSE (10048) Address already in use. Typically, only one usage of each socket address (protocol/IP address/port) is permitted. This error occurs if an application attempts to bind a socket to an IP address/port that has already been used for an existing socket, or a socket that was not closed properly, or one that is still in the process of closing. For server applications that need to bind multiple sockets to the same port number, consider using setsockopt(SO_REUSEADDR). Client applications usually need not call bind at all—connect chooses an unused port automatically. When bind is called with a wildcard address (involving ADDR_ANY), a WSAEADDRINUSE error could be delayed until the specific address is committed. This could happen with a call to another function later, including connect, listen, WSAConnect, or WSAJoinLeaf.

WSAEADDRNOTAVAIL (10049) Cannot assign requested address. The requested address is not valid in its context. This normally results from an attempt to bind to an address that is not valid for the local machine. This can also result from connect, sendto, WSAConnect, WSAJoinLeaf, or WSASendTo when the remote address or port is not valid for a remote machine (for example, address or port 0).

WSAEAFNOSUPPORT (10047) Address family not supported by protocol family. An address incompatible with the requested protocol was used. All sockets are created with an associated address family (that is, AF_INET for Internet Protocols) and a generic protocol type (that is, SOCK_STREAM). This error is returned if an incorrect protocol is explicitly requested in the socket call, or if an address of the wrong family is used for a socket, for example, in sendto.

WSAEALREADY (10037) Operation already in progress. An operation was attempted on a nonblocking socket with an operation already in progress—that is, calling connect a second time on a nonblocking socket that is already connecting, or canceling an asynchronous request (WSAAsyncGetXbyY) that has already been canceled or completed.

WSAECONNABORTED (10053) Software caused connection abort. An established connection was aborted by the software in your host machine, possibly due to a data transmission time-out or protocol error.

WSAECONNREFUSED (10061) Connection refused. No connection could be made because the target machine actively refused it. This usually results from trying to connect to a service that is inactive on the foreign host—that is, one with no server application running.

WSAECONNRESET (10054) Connection reset by peer. An existing connection was forcibly closed by the remote host. This normally results if the peer application on the remote host is suddenly stopped, the host is rebooted, or the remote host uses a hard close (see setsockopt for more information on the SO_LINGER option on the remote socket.) This error may also result if a connection was broken due to keep-alive activity detecting a failure while one or more operations are in progress. Operations that were in progress fail with WSAENETRESET. Subsequent operations fail with WSAECONNRESET.

WSAEDESTADDRREQ (10039) Destination address required. A required address was omitted from an operation on a socket. For example, this error is returned if sendto is called with the remote address of ADDR_ANY.

WSAEFAULT (10014) Bad address. The system detected an invalid pointer address in attempting to use a pointer argument of a call. This error occurs if an application passes an invalid pointer value, or if the length of the buffer is too small. For instance, if the length of an argument, which is a SOCKADDR structure, is smaller than the sizeof(SOCKADDR).

WSAEHOSTDOWN (10064) Host is down. A socket operation failed because the destination host is down. A socket operation encountered a dead host. Networking activity on the local host has not been initiated. These conditions are more likely to be indicated by the error WSAETIMEDOUT.

WSAEHOSTUNREACH (10065) No route to host. A socket operation was attempted to an unreachable host. See WSAENETUNREACH.

WSAEINPROGRESS (10036) Operation now in progress. A blocking operation is currently executing. Windows Sockets only allows a single blocking operation—per- task or thread—to be outstanding, and if any other function call is made (whether or not it references that or any other socket) the function fails with the WSAEINPROGRESS error.

WSAEINTR (10004) Interrupted function call. A blocking operation was interrupted by a call to WSACancelBlockingCall.

WSAEINVAL (10022) Invalid argument. Some invalid argument was supplied (for example, specifying an invalid level to the setsockopt function). In some instances, it also refers to the current state of the socket—for instance, calling accept on a socket that is not listening.

WSAEISCONN (10056) Socket is already connected. A connect request was made on an already-connected socket. Some implementations also return this error if sendto is called on a connected SOCK_DGRAM socket (for SOCK_STREAM sockets, the to parameter in sendto is ignored) although other implementations treat this as a legal occurrence.

WSAEMFILE (10024) Too many open files. Too many open sockets. Each implementation may have a maximum number of socket handles available, either globally, per process, or per thread.

WSAEMSGSIZE (10040) Message too long. A message sent on a datagram socket was larger than the internal message buffer or some other network limit, or the buffer used to receive a datagram was smaller than the datagram itself.

WSAENETDOWN (10050) Network is down. A socket operation encountered a dead network. This could indicate a serious failure of the network system (that is, the protocol stack that the Windows Sockets DLL runs over), the network interface, or the local network itself.

WSAENETRESET (10052) Network dropped connection on reset. The connection has been broken due to keep-alive activity detecting a failure while the operation was in progress. It can also be returned by setsockopt if an attempt is made to set SO_KEEPALIVE on a connection that has already failed.

WSAENETUNREACH (10051) Network is unreachable. A socket operation was attempted to an unreachable network. This usually means the local software knows no route to reach the remote host.

WSAENOBUFS (10055) No buffer space available. An operation on a socket could not be performed because the system lacked sufficient buffer space or because a queue was full.

WSAENOPROTOOPT (10042) Bad protocol option. An unknown, invalid or unsupported option or level was specified in a getsockopt or setsockopt call.

WSAENOTCONN (10057) Socket is not connected. A request to send or receive data was disallowed because the socket is not connected and (when sending on a datagram socket using sendto) no address was supplied. Any other type of operation might also return this error—for example, setsockopt setting SO_KEEPALIVE if the connection has been reset.

WSAENOTSOCK (10038) Socket operation on nonsocket. An operation was attempted on something that is not a socket. Either the socket handle parameter did not reference a valid socket, or for select, a member of an fd_set was not valid.

WSAEOPNOTSUPP (10045) Operation not supported. The attempted operation is not supported for the type of object referenced. Usually this occurs when a socket descriptor to a socket that cannot support this operation is trying to accept a connection on a datagram socket.

WSAEPFNOSUPPORT (10046) Protocol family not supported. The protocol family has not been configured into the system or no implementation for it exists. This message has a slightly different meaning from WSAEAFNOSUPPORT. However, it is interchangeable in most cases, and all Windows Sockets functions that return one of these messages also specify WSAEAFNOSUPPORT.

WSAEPROCLIM (10067) Too many processes. A Windows Sockets implementation may have a limit on the number of applications that can use it simultaneously. WSAStartup may fail with this error if the limit has been reached.

WSAEPROTONOSUPPORT (10043) Protocol not supported. The requested protocol has not been configured into the system, or no implementation for it exists. For example, a socket call requests a SOCK_DGRAM socket, but specifies a stream protocol.

WSAEPROTOTYPE (10041) Protocol wrong type for socket. A protocol was specified in the socket function call that does not support the semantics of the socket type requested. For example, the ARPA Internet UDP protocol cannot be specified with a socket type of SOCK_STREAM.

WSAESHUTDOWN (10058) Cannot send after socket shutdown. A request to send or receive data was disallowed because the socket had already been shut down in that direction with a previous shutdown call. By calling shutdown a partial close of a socket is requested, which is a signal that sending or receiving, or both have been discontinued.

WSAESOCKTNOSUPPORT (10044) Socket type not supported. The support for the specified socket type does not exist in this address family. For example, the optional type SOCK_RAW might be selected in a socket call, and the implementation does not support SOCK_RAW sockets at all.

WSAETIMEDOUT (10060) Connection timed out. A connection attempt failed because the connected party did not properly respond after a period of time, or the established connection failed because the connected host has failed to respond.

WSATYPE_NOT_FOUND (10109) Class type not found. The specified class was not found.

WSAEWOULDBLOCK (10035) Resource temporarily unavailable. This error is returned from operations on nonblocking sockets that cannot be completed immediately, for example recv when no data is queued to be read from the socket. It is a nonfatal error, and the operation should be retried later. It is normal for WSAEWOULDBLOCK to be reported as the result from calling connect on a nonblocking SOCK_STREAM socket, since some time must elapse for the connection to be established.

WSAHOST_NOT_FOUND (11001) Host not found. No such host is known. The name is not an official host name or alias, or it cannot be found in the database(s) being queried. This error may also be returned for protocol and service queries, and means that the specified name could not be found in the relevant database.

WSA_INVALID_HANDLE (OS dependent) Specified event object handle is invalid. An application attempts to use an event object, but the specified handle is not valid.

WSA_INVALID_PARAMETER (OS dependent) One or more parameters are invalid. An application used a Windows Sockets function which directly maps to a Win32 function. The Win32 function is indicating a problem with one or more parameters.

WSAINVALIDPROCTABLE (OS dependent) Invalid procedure table from service provider. A service provider returned a bogus procedure table to Ws2_32.dll. (Usually caused by one or more of the function pointers being null.)

WSAINVALIDPROVIDER (OS dependent) Invalid service provider version number. A service provider returned a version number other than 2.0.

WSA_IO_INCOMPLETE (OS dependent) Overlapped I/O event object not in signaled state. The application has tried to determine the status of an overlapped operation which is not yet completed. Applications that use WSAGetOverlappedResult (with the fWait flag set to FALSE) in a polling mode to determine when an overlapped operation has completed, get this error code until the operation is complete.

WSA_IO_PENDING (OS dependent) Overlapped operations will complete later. The application has initiated an overlapped operation that cannot be completed immediately. A completion indication will be given later when the operation has been completed.

WSA_NOT_ENOUGH_MEMORY (OS dependent) Insufficient memory available. An application used a Windows Sockets function that directly maps to a Win32 function. The Win32 function is indicating a lack of required memory resources.

WSANOTINITIALISED (10093) Successful WSAStartup not yet performed. Either the application has not called WSAStartup or WSAStartup failed. The application may be accessing a socket that the current active task does not own (that is, trying to share a socket between tasks), or WSACleanup has been called too many times.

WSANO_DATA (11004) Valid name, no data record of requested type. The requested name is valid and was found in the database, but it does not have the correct associated data being resolved for. The usual example for this is a host name-to-address translation attempt (using gethostbyname or WSAAsyncGetHostByName) which uses the DNS (Domain Name Server). An MX record is returned but no A record—indicating the host itself exists, but is not directly reachable.

WSANO_RECOVERY (11003) This is a nonrecoverable error. This indicates some sort of nonrecoverable error occurred during a database lookup. This may be because the database files (for example, BSD-compatible HOSTS, SERVICES, or PROTOCOLS files) could not be found, or a DNS request was returned by the server with a severe error.

WSAPROVIDERFAILEDINIT (OS dependent) Unable to initialize a service provider. Either a service provider's DLL could not be loaded (LoadLibrary failed) or the provider's WSPStartup/NSPStartup function failed.

WSASYSCALLFAILURE (OS dependent) System call failure. Returned when a system call that should never fail does. For example, if a call to WaitForMultipleObjects fails or one of the registry functions fails trying to manipulate the protocol/name space catalogs.

WSASYSNOTREADY (10091) Network subsystem is unavailable. This error is returned by WSAStartup if the Windows Sockets implementation cannot function at this time because the underlying system it uses to provide network services is currently unavailable. Users should check: That the appropriate Windows Sockets DLL file is in the current path. That they are not trying to use more than one Windows Sockets implementation simultaneously. If there is more than one Winsock DLL on your system, be sure the first one in the path is appropriate for the network subsystem currently loaded. The Windows Sockets implementation documentation to be sure all necessary components are currently installed and configured correctly.

WSATRY_AGAIN (11002) Nonauthoritative host not found. This is usually a temporary error during host name resolution and means that the local server did not receive a response from an authoritative server. A retry at some time later may be successful.

WSAVERNOTSUPPORTED (10092) Winsock.dll version out of range. The current Windows Sockets implementation does not support the Windows Sockets specification version requested by the application. Check that no old Windows Sockets DLL files are being accessed.

WSAEDISCON (10101) Graceful shutdown in progress. Returned by WSARecv and WSARecvFrom to indicate that the remote party has initiated a graceful shutdown sequence.

WSA_OPERATION_ABORTED (OS dependent) Overlapped operation aborted. An overlapped operation was canceled due to the closure of the socket, or the execution of the SIO_FLUSH command in WSAIoctl.

 

www.proxifier.com


Смотрите также